Fadini ELPRO 62 | Control Panel | 24V for JUNIOR 624 Gates

Product Overview The Fadini ELPRO 62 Control Panel is a 24V electronic programmer designed for the JUNIOR 624 gate operators. This control panel offers comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. The panel operates on a single phase power supply, ensuring reliable performance and ease of installation. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO 62 Control Panel enhances the functionality and safety of the JUNIOR 624 gate operators. This 24V electronic programmer supports precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 62, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 200 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 24 V DC/AC flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Motor run time: - Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 63 | Control Panel | Single Phase for JUNIOR 633 and 650

Product Overview The Fadini ELPRO 63 Control Panel is an advanced electronic programmer designed for the JUNIOR 633 and 650 gate operators. This control panel provides comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 63 Control Panel is designed to enhance the functionality and safety of the JUNIOR 633 and 650 gate operators. This single phase electronic programmer offers precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 63, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 375 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 230 V - 25W max flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Motor run time: - Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO 980 | Control Panel | Single Phase for BAYT 980 Barriers

Product Overview The Fadini ELPRO 980 Control Panel is an advanced single phase electronic controller specifically designed for the BAYT 980 barriers. This control panel offers a range of functions to ensure smooth and efficient barrier operation, including step-by-step function, deadman (hold on switched) control, and both automatic and semiautomatic modes of operation. It is also preset to operate two synchronized barriers simultaneously (Master/Slave). Key Features Step-by-step function for precise control Deadman (hold on switched) control for safety Automatic and semiautomatic modes of operation Preset to operate two synchronized barriers simultaneously (Master/Slave) Connector for traffic light control card with 2/3 lights External time clock for preset opening and closing times Designed for BAYT 980 barriers Product Description The Fadini ELPRO 980 Control Panel is engineered to provide reliable and efficient control for BAYT 980 barriers. This single phase controller supports a variety of operational modes, including step-by-step function and deadman (hold on switched) control. These features ensure precise and safe barrier operation in various scenarios. The control panel offers both automatic and semiautomatic modes of operation, allowing flexibility to meet different user requirements. It is also preset to handle two synchronized barriers simultaneously, functioning as a master/slave system. This makes it an ideal solution for complex barrier installations where coordinated movements are necessary. The ELPRO 980 is equipped with a connector to accommodate a control card for traffic lights with 2/3 lights, further enhancing its versatility. Additionally, an external time clock allows for preset opening and closing operations, providing convenience and efficiency in managing barrier schedules. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: - Photocells/Keyswitch/Radio receiver output: - Pilot light output: - DSA control output: - Flasher output: - Motor run time: - Dwell time: - Box dimensions: - Protection standards: - Working temperature: -

Fadini ELPRO 12 EVO | Control Panel | Single Phase for NYOTA 115 EVO

Product Overview The Fadini ELPRO 12 EVO Control Panel is an advanced single phase electronic controller specifically designed for the NYOTA 115 EVO range of motor operators. This control panel is built to provide reliable and efficient control of gate operations, ensuring smooth and precise movements. It features multiple outputs and a range of programmable functions to suit various operational needs. Key Features Specifically designed for the NYOTA 115 EVO range of motor operators Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 12 EVO Control Panel is tailored to manage the NYOTA 115 EVO motor operators efficiently. It operates on a single phase power supply of 230 V ±10% at 50 Hz, providing a robust solution for gate automation. With a maximum motor power capacity of 750 W, it ensures powerful and reliable performance. This control panel includes several output options for enhanced functionality. The courtesy light output supports up to 230 V - 100 W for a maximum of 3 minutes, while the photocells/keyswitch/radio receiver output offers 24 V DC with a maximum of 500 mA. Additionally, the pilot light output provides 24 V DC - 3W max, and the flasher output supports 230 V DC/AC. The ELPRO 12 EVO allows for precise control over gate operation timings, with dwell times ranging from 2 to 128 seconds and pedestrian opening times adjustable between 2 to 30 seconds. It is designed to operate within a temperature range of -20°C to +55°C, making it suitable for various environmental conditions. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Motor run time: - Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO S40 | Control Panel | Single Phase, Max 4 Automatic Bollards

Product Overview The Fadini ELPRO S40 Control Panel is a single phase electronic controller designed to manage up to 4 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 4 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S40 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to four bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S40 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 2400 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 37 | Control Panel | Single/Three-Phase for Sliding Gates

Product Overview The Fadini ELPRO 37 Control Panel is a versatile electronic controller designed for sliding gates. It supports both single and three-phase applications, making it suitable for various installation needs. The control panel incorporates an electronic brake for enhanced performance and reliability. It features multiple outputs and a range of programmable functions to ensure smooth and efficient gate operation. Key Features Supports single and three-phase applications Incorporated electronic brake for improved control Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description The Fadini ELPRO 37 Control Panel is designed to provide reliable and efficient control for sliding gates. This electronic controller supports both single and three-phase applications, accommodating various power supply configurations. The integrated electronic brake enhances the control and safety of gate operations, ensuring smooth and precise movements. The control panel features a single phase PCB power supply (230 V ±10% 50/60 Hz) and a three-phase PCB power supply (400 V ±10% 50/60 Hz), allowing flexibility in installation. It supports motors with a maximum power of 750 W for single-phase and 1200 W for three-phase applications. The panel includes outputs for courtesy lights, photocells, keyswitch, radio receiver, pilot light, and DSA control, providing comprehensive control options. The motor run time is adjustable between 0 to 120 seconds, while the dwell time ranges from 1 to 220 seconds, and the pedestrian opening time is adjustable from 1 to 45 seconds. The control panel is housed in a compact box with dimensions of 210 x 295 x 110 mm, ensuring easy installation and integration. It is built to IP64 protection standards, making it suitable for various environmental conditions, and operates effectively in temperatures ranging from -20°C to +55°C. Specifications Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO S20 | Control Panel | Single Phase, Max 2 Automatic Bollards

Product Overview The Fadini ELPRO S20 Control Panel is a single phase electronic controller designed to manage up to 2 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 2 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S20 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to two bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S20 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 1200 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

V2 Gate Automation V2 Flexy2 230Vac | Analog Control Unit for Swing & Sliding Gates | Built-in Receiver & Advanced Safety

Product Overview The V2 Flexy2 230Vac is an analog control unit designed for managing both swing gates (single and double leaf) and sliding gates. This unit features adjustment and programming via trimmer and dip-switch, making it a reliable and straightforward solution for gate automation. It supports a 230V power supply for two single-phase motors and includes a built-in receiver, adding convenience and efficiency to its operation. Key Features Analog control unit for swing and sliding gates 230V power supply for 2 single-phase motors Adjustment and programming by trimmer and dip-switch Built-in receiver (433.92 MHz) Stores up to 240 Personal Pass transmitters RJ45 connector for PROG2 programmer connection Start, pedestrian start, and stop controls from the transmitter Open/close limit switch inputs 230V flashing light output with intermittency Courtesy light output controllable by transmitter Safety device test before any opening Leaf slow-down function in limit switch area Monitoring of input status shown by LEDs Product Description The V2 Flexy2 230Vac analog control unit is a robust solution for the automation of swing and sliding gates. This unit is powered by a 230V supply and can control two single-phase motors, making it suitable for various gate configurations. Its adjustment and programming are easily managed through trimmer and dip-switch settings, offering simplicity and reliability. The built-in receiver operating at 433.92 MHz enhances convenience, allowing for seamless integration with up to 240 Personal Pass transmitters. This feature ensures that multiple users can operate the gate efficiently. The RJ45 connector facilitates connection to the PROG2 programmer via a standard network cable (UTP), providing additional programming capabilities. Control options include start, pedestrian start, and stop commands from the transmitter, offering flexibility in gate operation. The unit supports open/close limit switch inputs, ensuring precise control of gate movements. A 230V flashing light output, designed for use with intermittent flashing lights, provides clear visual indicators during gate operation. For enhanced safety, the Flexy2 performs a safety device test before any gate movement, ensuring all components are functioning correctly. The leaf slow-down function in the limit switch area reduces noise and mechanical stress, ensuring smooth and quiet gate closures. The courtesy light output can be controlled by the transmitter, adding convenience and enhancing security. Monitoring of input status is facilitated by LEDs, providing clear and immediate feedback on the system's operational state. Overall, the V2 Flexy2 230Vac analog control unit combines straightforward programming, robust performance, and advanced safety features, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY2+ 24Vdc | Digital Control Unit for Swing & Sliding Gates | Advanced Programming & Safety Features

Product Overview The V2 CITY2+ 24Vdc is a digital control unit designed for managing both swing gates (single and double leaf) and sliding gates equipped with 24Vdc motors. This unit features advanced programming capabilities, safety measures, and energy-efficient functions, ensuring reliable and efficient operation of your gate systems. It is suitable for both residential and commercial applications, providing comprehensive control and monitoring functionalities. Key Features Digital control unit for swing and sliding gates with 24Vdc motors Programming achieved using 3 program buttons and display Plug-in adapter for modular radio receiver Start, pedestrian start, and stop transmitter controls Auxiliary channel management from the transmitter Emergency pack battery input Encoder input Low voltage output for warning light or 24V flashing light Safety device test before any opening Amperometric sensor obstacle detection function with programmable threshold Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Monitoring of input status using the display ADI connector for connecting optional modules Product Description The V2 CITY2+ 24Vdc digital control unit is engineered for efficient and secure management of swing and sliding gates powered by 24Vdc motors. The unit facilitates easy programming with three buttons and a display interface, ensuring user-friendly operation and configuration. This control unit supports a plug-in adapter for a modular radio receiver, enabling wireless control with start, pedestrian start, and stop functions from the transmitter. Additionally, it includes auxiliary channel management, expanding its versatility in different applications. For enhanced safety, the CITY2+ features an emergency pack battery input and an encoder input, providing reliable performance even during power outages. The low voltage output is designed for a warning light or a 24V flashing light, offering clear visual indicators of gate activity. The unit conducts a safety device test before any gate movement, ensuring all components are functioning correctly. Its amperometric sensor obstacle detection function, with a programmable threshold, enhances safety by preventing collisions. Maintenance is made simple with an operational cycle counter and programmable reminders, helping to keep the system in optimal condition. The leaf slow-down function in the limit switch area reduces noise and mechanical stress during gate closure, ensuring smooth and quiet operation. Monitoring and diagnostics are streamlined through the display that shows input status, while the ADI connector allows for the connection of optional modules, enhancing the unit's functionality and adaptability. Overall, the V2 CITY2+ 24Vdc digital control unit combines advanced technology, robust safety features, and user-friendly programming, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY1 EVO 230V | Digital Control Unit for Swing & Sliding Gates | Advanced Safety & Energy Efficiency

Product Overview The V2 CITY1 EVO 230V is a digital control unit designed to manage both swing gates (single and double leaf) and sliding gates. With its advanced programming capabilities, safety features, and energy-saving functions, this unit ensures reliable and efficient gate operation. It supports a 230V power supply for two single-phase motors equipped with ENCODER technology, making it an ideal choice for both residential and commercial gate automation needs. Key Features Digital control unit for swing and sliding gates 230V power supply for 2 single-phase motors with ENCODER Plug-in adapter for modular radio receiver MR2 Start, pedestrian start, and stop controls from the transmitter Safety device test before any opening 230V flashing light output with intermittency Self-learning operating time function Obstacle detection function Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Slow start function during opening Monitoring of input status using the display ADI 2.0 connector for advanced ADI device management USB connector for PC connectivity, firmware updates, and diagnostics LOW ENERGY module connector for electrical energy savings Product Description The V2 CITY1 EVO 230V digital control unit is a high-performance solution for managing swing and sliding gates. Designed to handle single and double leaf swing gates as well as sliding gates, this unit offers versatile and robust control capabilities. It is powered by a 230V supply and supports two single-phase motors equipped with ENCODER technology for precise and smooth operation. Programming the CITY1 EVO is straightforward, using three program buttons and a clear display interface. This user-friendly approach ensures easy setup and adjustment to meet specific operational requirements. Key safety features include a test of the safety devices before any gate movement, and an obstacle detection function that prevents collisions. The unit also features a self-learning operating time function, which optimizes performance by adapting to the gate's characteristics. The control unit is compatible with a modular radio receiver MR2, allowing for wireless control with start, pedestrian start, and stop functions accessible from the transmitter. A 230V flashing light output, intended for use with intermittent flashing lights, provides clear visual indicators during gate operation. Maintenance is simplified with an operational cycle counter and programmable reminders, ensuring the system remains in optimal condition. The unit's leaf slow-down function in the limit switch area reduces noise and mechanical stress, while the slow start function during opening further enhances smooth operation. Monitoring and diagnostics are facilitated through a display that shows input status, and the ADI 2.0 connector allows for advanced management of ADI devices. Additionally, a USB connector enables connection to a PC for detailed programming, firmware updates, and operation diagnostics. For energy efficiency, the LOW ENERGY module connector helps reduce power consumption by deactivating non-essential components when the gate is not in motion. This feature contributes to lower energy costs and enhanced sustainability. Overall, the V2 CITY1 EVO 230V digital control unit combines advanced technology, comprehensive safety features, and energy-saving functionalities, making it a top choice for modern gate automation systems.

Nice MC800 Control Panel for 230V Motors with BlueBUS Technology

Product Overview The Nice MC800 Control Unit is designed for managing 1 or 2 230V motors, integrating seamlessly with Nice BlueBUS technology and the Nice Opera system. This advanced control panel offers easy installation and connection of accessories, along with enhanced automation management, programming, and diagnostics capabilities, even remotely. Key Features BlueBUS Compatibility: Enables simple connection of the control unit and accessories using just two wires. Opera System Compatibility: Allows for comprehensive automation management, programming, and diagnostics, including remote operations. Multi-function O-View Display: (Not included) Mountable in the box for system personalization, modifying opening and closing positions, staggered closing of leaves, and decelerations, and adjusting parameters like force, speed, and obstacle sensitivity for each motor. Universal Power Supply: 120/230 VAC 50/60Hz Microprocessor Logic: Combines the benefits of the Nice Opera system with advanced Nice system functions such as gradual start and deceleration, automatic limit switch position memorization, and pedestrian pass door function. Safe and Reliable: Features obstacle detection with double technology throughout the travel and the possibility of connecting latest generation resistive sensitive edges. Intelligent Design: Includes features like power supply confirmation and efficient operation indication, automatic fault diagnostics, and signaling via flashing light and confirmation LEDs. Radio Receiver: Designed to accommodate SM plug-in receivers. Compatible Motors TO4005 TO4006 TO4015 TO4605 TO5015 TO5016 TO5605 HY7100 HY7005 WG4000 WG5000 MFAB3000 MFAB3000L LFAB4000 Advanced Features Gradual Start and Deceleration: Smooth operation and reduced wear on the motor. Automatic Limit Switch Position Memorization: Simplifies setup and ensures accurate operation. Pedestrian Pass Door Function: Enhances accessibility and convenience. Obstacle Detection: Double technology throughout the travel for improved safety. Fault Diagnostics: Automatic and easy-to-read signaling via flashing light and confirmation LEDs. Flexible Configuration: Customizable parameters for force, speed, and obstacle sensitivity for each motor. Installation and Operation The Nice MC800 control panel ensures a straightforward installation process, thanks to its BlueBUS technology which simplifies wiring to just two wires for all connections. The control unit's compatibility with the Nice Opera system enables advanced remote management, making it a smart choice for both residential and commercial applications. Technical Specifications Power Supply: 120/230 VAC 50/60Hz Output: Supports 1 or 2 230V motors Radio Receiver: Compatible with SM plug-in receivers Protection: Built-in obstacle detection with double technology

GENIUS AUTOMATION Brain 17 230V Electronic Control Board | Advanced Automation Control

Product Overview The Brain 17 230V electronic control board is the pinnacle of technological evolution, designed to meet every parameter for professional automated systems. This advanced control board delivers top performance and, when combined with the PROCoder absolute magnetic encoder, ensures complete control over automation movement and facilitates reverse on obstacle detection. Key Features Advanced 230V electronic control board High-tech automation control Compatible with PROCoder magnetic encoder Ensures complete control of automation movement Facilitates reverse on obstacle detection Designed for professional automated systems Top performance and reliability Product Description The Brain 17 is an advanced 230V electronic control board that represents the highest level of technology evolution in the field of automated systems. Designed to meet every possible parameter, the Brain 17 control board offers top-tier performance, making it an ideal choice for building highly professional and reliable automated systems. Advanced Technology The Brain 17 control board is engineered to deliver superior performance, ensuring that automated systems operate with precision and efficiency. Its advanced technology allows it to handle a wide range of automation tasks, providing flexibility and adaptability in various applications. Complete Control with PROCoder When combined with the absolute magnetic encoder PROCoder, the Brain 17 control board offers complete control over automation movement. This combination ensures accurate positioning and smooth operation, enhancing the overall performance of the automated system. Additionally, the system facilitates reverse on obstacle detection, providing an extra layer of safety and reliability. Professional Performance Designed for professional use, the Brain 17 control board is built to meet the demands of high-performance automated systems. Its robust construction and advanced features make it suitable for a wide range of applications, ensuring long-term reliability and top performance. Specifications Power Supply: 230V Compatible with PROCoder absolute magnetic encoder Facilitates reverse on obstacle detection Designed for professional automated systems Top performance and reliability Package Contents Brain 17 230V Electronic Control Board Mounting hardware Instructions Applications The Brain 17 control board is ideal for use in a wide range of professional automated systems, including gates, doors, and other automation applications. Its advanced technology and compatibility with the PROCoder magnetic encoder make it a valuable addition to any high-performance automation setup, ensuring precise control and reliable operation.

Fadini F/7047L Elpro 27 | Single Phase Control Panel | Swing/Sliding Gates

Product Overview The Fadini Elpro 27 single phase control panel is designed to efficiently control single or double swinging gates as well as single or bi-parting sliding gates. This versatile electronic controller is equipped with motor capacitors and can handle motor operators with or without limit switches, making it suitable for a wide range of gate automation applications. Key Features Single phase PCB power supply: 230 V ±10% 50/60 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W max DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time: 1 - 220 S Closing gate delay time: 0-10 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description Fadini F/7047L Elpro 27 Single Phase Control Panel The Fadini Elpro 27 control panel is an advanced electronic controller designed for the automation of single or double swinging gates and single or bi-parting sliding gates. This controller is equipped with motor capacitors and supports motor operators with or without limit switches. The Elpro 27 is ideal for various gate automation applications, offering a single phase PCB power supply of 230 V ±10% 50/60 Hz, and a maximum motor power capacity of 750 W. Key outputs of the Elpro 27 include courtesy light output at 230 V - 100 W max, photocells/keyswitch/radio receiver output at 24 V AC, pilot light output at 24 V - 3W max, DSA control output at 24 V AC, and flasher output at 230 V - 25 W max. The control panel provides adjustable motor run time settings (0 - 120 S for sliding gates and 0 - 60 S for swing gates), dwell time (1 - 220 S), closing gate delay time (0-10 S), and pedestrian opening time (1 - 45 S). Encased in a durable box with dimensions of 210 x 295 x 110 mm, the Elpro 27 meets IP64 protection standards and operates efficiently in a working temperature range of -20°C to +55°C. This control panel ensures reliable and safe operation for various gate automation needs. Technical Specifications SpecificationDetails Single phase PCB power supply 230 V ±10% 50/60 Hz Max. power of motors 750 W Courtesy light output 230 V - 100 W max Photocells/Keyswitch/Radio receiver output 24 V AC Pilot light output 24 V - 3W max DSA control output 24 V AC Flasher output 230 V - 25 W max Motor run time 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time 1 - 220 S Closing gate delay time 0-10 S Pedestrian opening time 1 - 45 S Box dimensions 210 x 295 x 110 mm Protection standards IP64 Working temperature -20°C to +55°C