FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right or Left hand)

FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right hand F/9879DXL or Left hand F/9879SXL) Two beams cut to measure, complete with joint, arm and cable. For driveways up to 6 m, beam up to 6.400 mm, for BAYT 980 automatic, right-hand and left-hand versions.  

FADINI F/9869L 12Vdc Green-Red LED for BAYT 980 beam

FADINI F/9869L 12Vdc Green-Red LED for BAYT 980 beam with LED lights 12 Vdc two-colour LED light (red-green) for the beams, complete with lens, support and cable

FADINI F/9860L Reinforcement beam 3m for BAYT 980 beam with LED lights

FADINI F/9860L Reinforcement beam 3m for BAYT 980 beam with LED lights Aluminium reinforcement beam x3.000 mm for products: F/9865L (only when a fence is fitted), F/9866L and F/9867L  

FADINI Fixed pedestal for BAYT 980 beam (various options)

FADINI Fixed pedestal for BAYT 980 beam (F/9752L, F/9755L, F/9756L, F/9757L, F/9758L, F/9759L) This is fixed pedestal for beam support. It comes in RAL 2002 and AISI 304 finishes, various heights and electromagnet lock and padlock. PRODUCT CODE FINISH HEIGHT LOCKING FULL DESCRIPTION F/9752L RAL 2002 orange red 840mm Padlock Fixed fork-end pedestal for beam support, designed for padlock. S235JRH steel, cataphoresis treated and polyester powder coated in RAL 2002 orange red. Height from ground level: 840 mm F/9755L RAL 2002 orange red Various height options (min. 600 mm - max. 1.100 mm from ground level) Electromagnet lock F/2569L Adjustable fixed fork-end pedestal for beam support with various height options (min. 600 mm - max. 1.100 mm from ground level) designed for electromagnet lock (code F/2569L). S235JRH steel, cataphoresis treated and RAL 2002 orange red polyester powder coated. F/9756L RAL 2002 orange red 795mm Electromagnet lock F/2569L Fixed fork-end pedestal for beam support, designed for electromagnet lock (code F/2569L). S235JRH steel, cataphoresis treated and polyester powder coated in RAL 2002 orange red. Height from ground level: 795 mm F/9757L AISI 304 stainless steel 795mm Electromagnet lock F/2569L AISI 304 stainless steel fixed fork-end pedestal for beam support, designed for electromagnet lock (code F/2569L). Height from ground level: 795 mm F/9758L RAL 2002 orange red 840mm - Fixed fork-end pedestal for beam support. S235JRH steel, cataphoresis treated and polyester powder coated in RAL 2002 orange red. Height from ground level: 840 mm F/9759L AISI 304 stainless steel 840mm - AISI 304 stainless steel fixed fork-end pedestal for beam support. Height from ground level: 840 mm  

FADINI F/5023L Rubber profile for BAYT 980 beam

FADINI F/5023L Rubber profile for BAYT 980 beam Rubber profile to be fitted under the aluminium beam  

FADINI F/1948L Articulated folding pedestal for BAYT 980 beam

FADINI F/1948L Articulated folding pedestal for BAYT 980 beam Aluminium folding lift-up pedestal, with adjustable foot  

FADINI F/1945L Reinforcement beam 3m for BAYT 980 beam

FADINI F/1945L Reinforcement beam 3m for BAYT 980 beam Aluminium reinforcement beam x3.000 mm for products: F/1942L (only when a fence is fitted), F/1943L and F/1944L  

FADINI F/1933L Aluminium expansion joint for BAYT 980 beam

FADINI F/1933L Aluminium expansion joint for BAYT 980 beam Aluminium expanding joint for beam assembling.  

FADINI F/1097L Set of 12 retroreflective red stickers for the BARRI 88 beams

FADINI F/1097L Set of 12 retroreflective red stickers for the BARRI 88 beams Set of 10 red reflecting beam stickers for BARRI 88.

FADINI F/1913L Set of 10 red reflecting beam stickers for BAYT 980

FADINI F/1913L Set of 10 red reflecting beam stickers for BAYT 980 Set of 10 red reflecting beam stickers for BAYT 980.  

FADINI F/9888L 24 Vac blue LED light complete with lens, support and power supply cable for BAYT 980

FADINI F/9888L 24 Vac blue LED light complete with lens, support and power supply cable for BAYT 980 24 Vac blue LED light for BAYT 980 complete with lens, support and power supply cable. To be fitted on the housing.  

FADINI F/9840L AL.FLEX 34 electronic control card for BAYT 980

FADINI F/9840L AL.FLEX 34 electronic control card for BAYT 980 AL.FLEX 34 electronic control card allowing the LED lights on the beam to work  

FADINI F/9897L Beam rotation device ALA.180 for BAYT 980

FADINI F/9897L Beam rotation device ALA.180 for BAYT 980 This device (ALA.180) allows for the beam to swing away (rotate) in the direction of the collision in case a vehicle crashes against it and is so designed to prevent the structural components of BAYT 980 automatic barrier and the beam from getting damaged. The device (ALA.180) can be supplied factory-fitted or be fitted to installations of BAYT 980 already existing. Limits of application: beam 6.400 mm max. or 4.200 mm max. with a fence

FADINI F/9873L 24Vdc Solenoid Valve for BAYT 980

FADINI F/9873L 24Vdc Solenoid Valve for BAYT 980 This is a Blackout device - in case of power failure, it is possible to raise the beam by hand.  It is always to be combined with the voltage stabilizer code F/9321L for the installation to work properly. The device is factory-fitted.  

FADINI Complete anchoring base plate with rag bolts for BAYT 980 - material is optional (F/9827L & F/9829L)

FADINI Complete anchoring base plate with rag bolts for BAYT 980 - material is optional (F/9827L & F/9829L) Complete anchoring base plate has two material options: Zinc-coated steel AISI 304 stainless steel

FADINI F/2569L 24 Vac magnetic lock for BAYT 980

FADINI F/2569L 24 Vac magnetic lock for BAYT 980 24Vac electromagnetic lock to be used on BAYT 980.  

FADINI F/7283L Electronic card traffic lights effect for BAYT 980

FADINI F/7283L Electronic card traffic lights effect for BAYT 980 Electronic card for controlling the led lights on the beam for traffic-lights effect: green light with beam in vertical position and red light with beam in horizontal position or in motion.  

FADINI F/2037L and F/2042L Pre-assembled loop 6m or 12m

FADINI F/2037L and F/2042L Pre-assembled loop 6m or 12m This pre-assembled loop has 2 options to choose from: F/2037L - 6 m circumference pre-assembled loop with 10 m power supply cable F/2042L - 12 m circumference pre-assembled loop with 15 m power supply cable

FADINI BAYT 980 Counterweights and Beam Truss Cables

FADINI BAYT 980 Counterweights and Beam Truss Cables  Each code bellow includes the complete kit in the indicated configuration, for installation on the BAYT 980 automatic barrier CODE (click to see) DESCRIPTION COUNTERWEIGHT (10 kg each) BEAM (m) FENCE F/1958L Kit of 4 stainless steel truss cables - 7,40 - F/1967L Kit of 4 stainless steel truss cables - 8,50 - F/1962L Zinc-coated steel counterweights kit with support for beam fixing 3 pz 7,40 - F/1965L Zinc-coated steel counterweights kit with support for beam fixing 4 pz 6,40 APPLICABLE F/1968L Zinc-coated steel counterweights kit with support for beam fixing 6 pz 7,40 APPLICABLE F/1969L Zinc-coated steel counterweights kit with support for beam fixing 7 pz 8,50 - F/1970L Zinc-coated steel counterweights kit with support for beam fixing 9 pz 8,50 APPLICABLE We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

FADINI BARRI 88 230 Vac 4m automatic barrier for residential and collective applications

FADINI BARRI 88 230 Vac 4m automatic barrier for residential and collective applications ANTI-CRUSH SAFETY 230 Vac oil-hydraulic operator, beam slowdown in opening and closing. Ideal for residential and collective access control. QUICK AND SMOOTH MOVEMENTS Reinforced structure made of RAL 1018 zinc yellow powder coated steel, incorporated electronic control board. Anodized aluminium beam with an oval section design. TECHNICAL DATA Power Supply 230V AC - 50Hz Absorbed power 330 W Absorbed current 1,8 A Power yield (kW – HP) 0,24 - 0,33 Opening time (s) ~ 5 Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type 708L Weight without beam (kg) 58 Treatment and finishing Cataphoresis and polyester powder coating in RAL 1018 zinc yellow Frequency of use Intensive NOTE Single product includes a housing cabinet fitted with a door, two keys, B88 motor-pump and jack assembly, ELPRO 88 exp electronic control board, electric power supply and earth cables, aluminium beam 30x80x4.000 mm, flanged bracket to take and fasten the beam, zinc-coated fixing base plate with rag bolts and nuts. The housing is cataphoresis treated and polyester powder coated in RAL 1018 zinc yellow. Folding pedestal and fixed pedestal only for the codes as indicated in the chart.  

FADINI CORAL | Hydraulic Bollard for Access Control

Product Overview The FADINI CORAL Hydraulic Bollard is a versatile solution for access control in residential, commercial, and industrial applications. Designed to manage traffic and secure sensitive areas, it is built to withstand heavy-duty use while maintaining ease of maintenance and installation. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Optional solenoid valve for automatic lowering during power failures Easy access to oil-hydraulic components for maintenance Scratch-proof, cataphoresis treated, and polyester powder coated steel cylinder Optional LED lights for enhanced visibility Hall effect limit switch sensors IP67 protection rating Supports a range of command and safety accessories Designed for heavy-duty service in extreme temperatures Product Description The FADINI CORAL hydraulic bollard is engineered for efficient access control in various environments. It features a hydraulic locking device that secures the bollard in its standing position, while an emergency manual lowering system ensures it can be quickly retracted when needed. The optional solenoid valve allows for automatic lowering during power failures, enhancing security and convenience. The bollard’s design facilitates easy access to its oil-hydraulic components, simplifying maintenance and reducing service times. The components are well-protected against rust and other environmental factors, ensuring long-term durability. The bollard is constructed from scratch-proof, cataphoresis treated, and polyester powder coated steel, providing a robust and resilient structure. Installation is straightforward, with a reduced weight pit that requires minimal excavation or brickwork. The bollard is available with optional LED lights for improved visibility and safety. It supports various command and safety accessories, allowing for precise control and reliable operation. Specifications Fully retractable, heavy-duty automatic bollard Incorporates oil-hydraulic motor pump unit and actuator Height from ground level: 500, 600, or 800 mm Cylinder diameter: 100 mm Cylinder thickness: 5 mm Cylinder material: S235JRH steel Treatment and finishing: Cataphoresis and polyester powder coating RAL 7016 Impact resistance: 30,000 J Breakout resistance: 150,000 J Maximum static load: 20,000 kg (lowered position) Working temperature: -40°C to +80°C Power supply: 230 Vac ± 10%, 50 Hz Absorbed power: 330 W Frequency of use: 2,000 cycles/day Product Guide CODEHEIGHT (mm)LED LIGHTSSOLENOID VALVEWEIGHT (kg)RISING TIME (s)RISING SPEED (cm/s)LOWERING TIME (s)LOWERING SPEED (cm/s) F/1050L 500 NO NO 86 ∼4.7 11 ∼4.4 12 F/1052L 500 NO YES 86 ∼4.7 11 ∼4.4 12 F/1054L 500 YES NO 86 ∼4.7 11 ∼4.4 12 F/1057L 500 YES YES 86 ∼4.7 11 ∼4.4 12 F/1059L 600 NO NO 90 ∼5.6 11 ∼5.1 12 F/1063L 600 NO YES 90 ∼5.6 11 ∼5.1 12 F/1064L 600 YES NO 90 ∼5.6 11 ∼5.1 12 F/1067L 600 YES YES 90 ∼5.6 11 ∼5.1 12 F/1080L 800 NO NO 104 ∼7.5 11 ∼6.6 12 F/1082L 800 NO YES 104 ∼7.5 11 ∼6.6 12 F/1084L 800 YES NO 104 ∼7.5 11 ∼6.6 12 F/1087L 800 YES YES 104 ∼7.5 11 ∼6.6 12 Additional Information Each CORAL bollard includes a complete pit, cover plate, and moving cylinder made of cataphoresis treated steel and polyester powder coated in RAL 7016 anthracite grey. The bollard is complete with a head and rubber edge, approved retro-reflecting micro-prismatic high intensity adhesive film, electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and motor-pump drive unit, two limit switch sensors (bollard in standing and lowered positions), a release spanner, and a 10 m electric cable to power the hydraulic motor-pump drive unit and the limit switches. LED lights and a 24 Vdc solenoid valve with a 10 m electric cable are included only for the items indicated in the table.

FADINI TALOS C730 | Automatic Bollard for Perimeter Security

Product Overview The FADINI TALOS C730 F/9685L Automatic Bollard is specifically designed for perimeter security and traffic control in sensitive areas such as military stations, police headquarters, and airports. Engineered to withstand extreme impacts, this bollard is ideal for preventing unauthorized vehicle access and protecting high-security zones from potential terrorist attacks. The bollard has been tested to endure the impact of a 7.5-ton vehicle traveling at 48 km/h. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Burglar-proof cover plate to prevent unauthorized access Scratch-proof, cataphoresis treated, and polyester powder coated steel rising cylinder Optional AISI 304 stainless steel cover sleeve High breakout resistance: 750,000 J Integrated LED lights and hall effect limit switch sensors Heating device for cold climates (down to -40°C) Compatible with a range of command and safety accessories Product Description The FADINI TALOS C730 automatic bollard is engineered for the highest level of perimeter security and traffic control. Its robust construction features a hydraulic locking device to keep the bollard secure in its standing position, and an emergency manual lowering function is provided for critical situations. The bollard includes a burglar-proof cover plate, preventing unauthorized lowering and enhancing security. Built from scratch-proof, cataphoresis treated, and polyester powder coated steel, the TALOS C730 bollard ensures durability and longevity in demanding environments. It is also available with an AISI 304 stainless steel cover sleeve for added protection and aesthetic appeal. The bollard features integrated LED lights and hall effect limit switch sensors, improving visibility and providing precise operational feedback. The TALOS C730 is versatile and supports a wide range of command and safety accessories. It includes a beeper to signal movements and a heating device for reliable operation in extremely cold temperatures. The electronic control unit can manage several bollards simultaneously, making it suitable for large-scale security installations. Specifications Cylinder diameter: 275 mm Cylinder thickness: 12 mm Cylinder height from ground: 1,000 mm Cylinder material: S355J2H steel with optional AISI 304 brushed stainless steel sleeve Treatment and finishing: Cataphoresis and polyester powder coating RAL 7016 Pit: Hot dip galvanization Rising time: ~5.00 s (20 cm/s) Lowering time: ~4.20 s (23 cm/s) Working temperature: -20°C to +80°C (-40°C with heater) Oil type: 708L Power supply: 230 Vac, 50 Hz Absorbed power: 1,850 W Absorbed current: 5 A Grade of protection IP/motor-pump: 67 Frequency of use: Heavy duty, 2,000 cycles/day Impact resistance: 250,000 J Breakout resistance: 750,000 J Maximum static load: 20,000 kg Dimensions (mm) Diameter: 275 Height: 1,000 Thickness: 12 Additional Information Each TALOS C730 bollard includes a complete pit, a moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with a head and rubber edge, and 12 amber-colour integrated LED lights. It also features approved retro-reflecting high intensity micro-prismatic adhesive film, an electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), a burglar-proof cover plate, and a release spanner with a triangular socket. The power supply cable is not included but is available in the section of the catalogue dedicated to bollard accessories.

FADINI TALOS M30 | Automatic Bollard for Perimeter Security

Product Overview The FADINI TALOS M30 F/9682L Automatic Bollard is specifically designed for perimeter security and traffic control in sensitive areas. It provides a high level of security, adhering to ASTM F2656-07, PAS 68:2013, and IWA 14-1 specifications. The bollard is built to withstand severe impacts and offers reliable operation in high-frequency usage environments. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Burglar-proof cover plate to prevent unauthorized access Scratch-proof, cataphoresis treated, and polyester powder coated steel rising cylinder Optional AISI 304 stainless steel cover sleeve High breakout resistance: 700,000 J Integrated LED lights and hall effect limit switch sensors Heating device for cold climates (down to -40°C) Compatible with a range of command and safety accessories Product Description The FADINI TALOS M30 automatic bollard is engineered for superior perimeter security and traffic control. The hydraulic locking device ensures the bollard remains secure in its standing position, while the emergency manual lowering function allows for quick retraction if needed. The bollard is protected by a burglar-proof cover plate, preventing unauthorized lowering. Constructed from scratch-proof, cataphoresis treated, and polyester powder coated steel, the TALOS M30 is designed to withstand harsh conditions and heavy impacts. The bollard is available with an optional AISI 304 stainless steel cover sleeve, offering additional durability and a sleek finish. Integrated LED lights and hall effect limit switch sensors enhance visibility and operational feedback. The TALOS M30 is highly versatile, supporting a wide range of command and safety accessories for reliable and precise control. A beeper signals movements, and a heating device ensures functionality in extremely cold temperatures down to -40°C. The electronic control unit can manage multiple bollards simultaneously, making it suitable for large installations. Specifications Cylinder diameter: 275 mm Cylinder thickness: 12 mm Cylinder height from ground: 800 mm Cylinder material: S355J2H steel with optional AISI 304 brushed stainless steel sleeve Treatment and finishing: Cataphoresis and polyester powder coating RAL 7016 Pit: Hot dip galvanization Rising time: ~4.50 s (18 cm/s) Lowering time: ~3.42 s (23 cm/s) Working temperature: -20°C to +80°C (-40°C with heater) Oil type: 708L Power supply: 230 Vac, 50 Hz Absorbed power: 1,100 W Absorbed current: 1.8 - 3.5 A Grade of protection IP/motor-pump: 67 Frequency of use: Heavy duty, 2,000 cycles/day Impact resistance: 150,000 J Breakout resistance: 700,000 J Maximum static load: 20,000 kg Dimensions (mm) Diameter: 275 Height: 800 Thickness: 12 Additional Information Each TALOS M30 bollard includes a complete pit, a moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with a head and rubber edge, and 12 amber-colour integrated LED lights. It also features approved retro-reflecting high intensity micro-prismatic adhesive film, an electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), a burglar-proof cover plate, and a release spanner with a triangular socket. The power supply cable is not included but is available in the section of the catalogue dedicated to bollard accessories.

FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO

FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO - F/9690L and F/9689L PERIMETER SECURITY Intended for traffic control and protection of those sensitive areas (embassies, military bases, government palaces, banks, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to safely withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 80 km/h and stay intact and fully operative. EFO (Emergency Fast Operation) version also available for quick rising in an emergency. OIL-HYDRAULIC Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Drive unit with two lobe pumps. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered. STRONG Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 2.000.000 J. Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights. VERSATILE A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °C, where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.  CERTIFICATES Classes of performance: K12 / M50 / C750 Certified: ASTM F2656-15 C750 PAS 68:2013 V/7500 (N3)/80 IWA 14-1:2013 V/7200 [N3C]/80 DIMENSIONS (mm) ø 275 h 1.000 δ 20 ADDITIONAL INFORMATION Each item includes an automatic bollard complete with pit, moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with head and rubber edge and No. 12 amber-colour integrated LED lights, approved retro-reflecting high intensity micro-prismatic adhesive film, electrolytic galvanized steel housing assembly with an oilhydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), burglar-proof cover plate and release spanner with triangular socket. The power supply cable is not included, it is though available in the section of the catalogue dedicated to the bollard accessories. SPECIFICATIONS TALOS BOLLARD TYPE TALOS M50 series Cylinder diameter (mm) 275 Cylinder thickness (mm) 20 Cylinder height from ground (mm) 1000 Cylinder material S355K2H steel Cylinder treatment and finishing cataphoresis and polyester powder coating RAL 7016 / AISI 304 brushed SS steel sleeve Pit hot dip galvanization Rising time (s) [cm/s] ~5,00 [20] / with EFO ~1,5 [50] Lowering time (s) [cm/s] ~3.20 [20] Working temperature (°C) -20 ÷ +80 (-40 with heater) Oil type 708L Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 3.100 (1.550 + 1.550) Absorbed current (A) 10 ÷ 13 Grade of protection IP/motor-pump 67 Frequency of use (cycles/day) heavy duty / 2.000 Impact resistance (J) 700.000 Breakout resistance (J) 2.000.000 Maximum static load (kg) 20.000

FADINI TALOS 94 / TALOS 96 | Automatic Bollards for Traffic Control

Product Overview The FADINI TALOS 94 and TALOS 96 automatic bollards are designed for effective traffic control in various settings, including residential, commercial, industrial, and urban areas. These fully retractable bollards are built to handle a high number of operations daily, ensuring reliable performance and enhanced security. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Optional solenoid valve for automatic lowering during power failures Obstacle detection to prevent rising when an obstacle is detected Heating device for cold climates (down to -40°C) Scratch-proof and corrosion-resistant construction Integrated LED lights for enhanced visibility Available in various heights and materials High Resistance Cylinder (HRC) models for greater breakout resistance Product Description TALOS 94 The FADINI TALOS 94 automatic bollard is recommended for controlling access in residential and commercial areas. It features a hydraulic locking device, obstacle detection, and a manual emergency lowering system. The bollard's components, including the motor pump and oil-hydraulic actuator, are housed within the bollard for easy maintenance and protection against rust and other environmental factors. The TALOS 94 is available in various configurations, with options for stainless steel or HRC cylinders for enhanced resistance. The bollard is equipped with hall effect limit switch sensors, a rubber-edged cylinder head, and integrated LED lights for improved safety and visibility. TALOS 96 The FADINI TALOS 96 automatic bollard is designed for locations requiring high breakout resistance, such as commercial centers and banks. It offers the same features as the TALOS 94 but with additional armoured security. The TALOS 96 is constructed to withstand heavy-duty usage and provides maximum security with its high resistance to impacts and breakouts. This model also features hydraulic locking, emergency manual lowering, and easy access to the hydraulic components for maintenance. The TALOS 96 is available in various configurations with HRC cylinders for superior breakout resistance. Specifications SpecificationTALOS 94 SeriesTALOS 96 Series Cylinder diameter (mm) 275 275 Cylinder thickness (mm) 4 12 Cylinder height from ground (mm) 500/600/700/800 500/600/700/800 Cylinder material Stainless steel AISI 304 / AISI 316 / RAL 1028 S355J2H steel Cylinder treatment and finishing Brushed Cataphoresis and polyester powder coating RAL 7016 Pit Hot dip galvanization Hot dip galvanization Working temperature (°C) -20 ÷ +80 (-40 with heater) -20 ÷ +80 (-40 with heater) Oil type 708L 708L Power supply (Vac – Hz) 230 - 50 230 - 50 Absorbed power (W) 1.100 1.100 Absorbed current (A) 1,8 ÷ 3,5 1.8 Power yield (kW / HP) 0,25 / 0,33 0,25 / 0,33 Grade of protection IP/motor-pump 67 67 Frequency of use (cycles/day) Heavy duty / 2.000 Heavy duty / 2.000 Impact resistance (J) 52.000 | 70.000 - HRC 60.000 | 90.000 - HRC Breakout resistance (J) 320.000 | 420.000 - HRC 450.000 | 550.000 - HRC Maximum static load (kg) 20.000 20.000 Overall Measurements (mm)   HeightConstrainth 500 200 830 500 400 1.010 600 200 1.010 600 400 1.210

Fadini BAYT 980 Automatic Barrier with Variable Options

Fadini BAYT 980 Barrier Oil-hydraulic road barrier with beams from 3m up to 8m depending on speed (faster means smaller beam). OIL-HYDRAULIC SAFETY 230 Vac oil-hydraulic operator, motor-pump and piston integrated in the assembly. Ideal for those installations where heavy duty specifications are to meet: car parks, private and public driveways, residential, urban and industrial areas. Various speed options, slowdown on opening and closing. ROBUST Reinforced structure made of powder coated steel to ensure a greater resistance to weathering or AISI 304 brushed stainless steel. Anodized aluminium beams with oval section, available in various lengths and coming with an aluminium expanding joint; high strength against winds. VERSATILE Wide range of accessories: beam with a fence underneath, beam with incorporated LED lights highly visible in dark conditions (flashing option as traffic lights on request), folding device for roofed applications, swing-away arm fastening plate preventing breakage in case of vehicle collision. QUICK INSTALLATION The electronic control board is located in the upper part of the housing in a dedicated and separated box. “master/slave” option available on request for opposing barriers. HANDY A version of this model can be fully operated by hands (max. beam length 6,40 m without fence). Ideal for places where no electric power supply is available. SPECIFICATIONS Power Supply 230V AC - 50Hz Absorbed power 510 W Absorbed current 2.4 A Power output 0,37 kW (0,5 HP) Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type FADINI oil Oil reservoir volume 2.5 litres Colour Variable - choose in options (Stainless Steel or Orange) Frequency of use very intensive   PRODUCT INCLUDES AND ADDITIONAL INFORMATION AISI 304 STAINLESS STEEL RAL 2002 / 9006 SW3061 Housing cabinet with door Two keys Motor-pump-piston assembly COS 982 Electronic control board ELPRO 980 Voltage cut-off switch Power supply and ground cables Flanged fastening plate to hold the aluminium beam  Stainless steel anchoring base plate with rag bolts and nuts Zinc-coated anchoring base plate with rag bolts and nuts    Blue LED light incorporated into the housing  The barrier body, top cover and door are AISI 304 brushed stainless steel. The barrier body is cataphoresis treated and polyester powder coated in two colours, body in RAL 2002 orange red, while top cover and door are 9006 SW3061 textured grey.   Beam and accessories (folding and fixed pedestals, etc.) not included; consult the specific section in the catalogue.      PRODUCT CODE LIST RAL VERSION CODE (click to see) STAINLESS STEEL CODE (click to see) VERSION SPEED (s) PISTON PUMP BEAM LIMIT (m) access width [ ] FENCE REINFORCEMENT BEAM CABLES KIT COUNTERWEIGHTS (10 kg each) F/9801DXL F/9811DXL right-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9801SXL F/9811SXL left-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9802DXL F/9812DXL right-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9802SXL F/9812SXL left-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9803DXL F/9813DXL right-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9803SXL F/9813SXL left-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9804DXL F/9814DXL right-handed    14  ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9804SXL F/9814SXL left-handed    14 ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9805DXL F/9815DXL right-handed     19 ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L F/9805SXL F/9815SXL left-handed     19  ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L

Fadini BAYT 980 barrier - Aluminium skirt for beams (variable sizes)

Aluminium skirt for beams of BAYT 980 barrier Available for different beam lengths It fits under the beam and makes the barrier clearly visible  

Fadini Bayt 980 | Aluminium Beams with Optional LEDs | Robust Performance

Product Overview The Fadini Bayt 980 Aluminium Beams are designed for robust and reliable performance, making them an ideal choice for enhancing your gate setup. These beams feature an oval section measuring 55x100 mm and come equipped with red retroreflective stickers, plastic plugs, and all necessary accessories for correct installation. For improved visibility and aesthetics, you can opt for the LED feature, adding an extra layer of functionality to your gate system. Key Features Robust aluminium beams with an oval section of 55x100 mm Optional LEDs for enhanced visibility and aesthetics Red retroreflective stickers for added safety Complete with plastic plugs and installation accessories Available in various lengths and configurations Product Description The Fadini Bayt 980 Aluminium Beams offer a durable and stylish solution for gate systems. These beams are available in several configurations to suit different access widths, with options for incorporating LEDs to boost visibility during low-light conditions. The beams are designed with an oval cross-section of 55x100 mm, providing a sleek and modern appearance. Each beam comes complete with red retroreflective stickers to enhance safety, plastic plugs, and all necessary accessories for a correct and secure installation. The Fadini Bayt 980 beams are suitable for a range of gate setups, providing both functional and aesthetic benefits. Available Configurations CODEBEAM (m)Access WidthN. OF LEDsN. OF JOINTS AND MODULES (m)Accessories for Correct Installation F/1936L 2.10 [1.75] - - - F/1937L 3.20 [2.85] - - - F/1940L 4.20 [3.85] - 1 (2.10+2.10) - F/1941L 5.30 [4.95] - 1 (2.10+3.20) - F/1942L 6.40 [6.05] - 1 (3.20+3.20) - F/1943L 7.40 [7.05] - 2 (2.10+2.10+3.20) F/1945L - F/1958L - F/1962L F/1944L 8.50 [8.15] - 2 (2.10+3.20+3.20) F/1945L - F/1967L - F/1969L F/9861L 2.10 [1.75] 4 - - F/9862L 3.20 [2.85] 6 - - F/9863L 4.20 [3.85] 8 1 (2.10+2.10) - F/9864L 5.30 [4.95] 10 1 (2.10+3.20) - F/9865L 6.40 [6.05] 12 1 (3.20+3.20) - F/9866L 7.40 [7.05] 14 2 (2.10+2.10+3.20) F/1945L - F/1958L - F/1962L F/9867L 8.50 [8.15] 16 2 (2.10+3.20+3.20) F/1945L - F/1967L - F/1969L Discount Offer We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout. Order Now Enhance your gate setup with the Fadini Bayt 980 Aluminium Beams. Order now and take advantage of our discount offer. For any questions or assistance, feel free to contact us.

CAME GT8 Barrier Kit 24V | For Road Widths Up to 8m | Complete Automatic Barrier Kit

Product Overview The CAME GT8 Barrier Kit 24V is a comprehensive automatic barrier solution designed for road widths up to 8 meters. This kit includes everything needed for efficient and secure barrier operation. Featuring an electromechanical motor with an intensive duty cycle, the GT8 barrier ensures reliable performance in high-traffic areas. Key Features Complete automatic barrier kit for road widths up to 8 meters Fast opening times ranging from 4 to 8 seconds Electromechanical motor with an intensive duty cycle Includes an 8m aluminum boom and fixed rest Equipped with LED strip and connector for enhanced visibility Reflective strips for added safety Comes with photocells for safety Product Includes 1 x GGT80AGS Barrier Unit 1 x 803XA-0420 8m Aluminum Boom 1 x G02807 Fixed Rest 1 x 803XA-0020 LED Strip 1 x 803XA-0190 LED Connector 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x Instruction Guide Specifications Max Boom Length: 8m Boom Length: 8m Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 24v Duty Cycle: Intensive Category: Automatic Barrier Kit Advanced Technology The GT8 barrier kit features advanced technology, including an electromechanical motor and LED lighting for enhanced visibility. Applications This automatic barrier kit is suitable for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it ideal for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation. CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME GT8 Barrier Kit 24V | For Road Widths Up to 6m | Complete Automatic Barrier Kit

Product Overview The CAME GT8 Barrier Kit 24V is a comprehensive automatic barrier solution designed for road widths up to 6 meters. This kit includes everything needed for efficient and secure barrier operation. Featuring an electromechanical motor with an intensive duty cycle, the GT8 barrier ensures reliable performance in high-traffic areas. Key Features Complete automatic barrier kit for road widths up to 6 meters Fast opening times ranging from 4 to 8 seconds Electromechanical motor with an intensive duty cycle Includes a 6.35m aluminum boom and fixed rest Equipped with LED strip and connector for enhanced visibility Reflective strips for added safety Comes with photocells Product Includes 1 x GGT80AGS Barrier Unit 1 x 803XA-0410 6.35m Aluminum Boom 1 x G02807 Fixed Rest 1 x 803XA-0020 LED Strip 1 x 803XA-0190 LED Connector 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x Instruction Guide Specifications Max Boom Length: 6m Boom Length: 6.35m Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 24v Duty Cycle: Intensive Category: Automatic Barrier Kit Advanced Technology The GT8 barrier kit features advanced technology, including an electromechanical motor and LED lighting for enhanced visibility. Applications This automatic barrier kit is suitable for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it ideal for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation. CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME GT8 Barrier Kit 24V | For Road Widths Up to 4m | Complete Automatic Barrier Kit

Product Overview The CAME GT8 Barrier Kit 24V is a comprehensive automatic barrier solution designed for road widths up to 4 meters. This kit includes everything needed for efficient and secure barrier operation. Featuring an electromechanical motor with an intensive duty cycle, the GT8 barrier ensures reliable performance in high-traffic areas. Key Features Complete automatic barrier kit for road widths up to 4 meters Fast opening times ranging from 4 to 8 seconds Electromechanical motor with an intensive duty cycle Includes a 4.34m aluminum boom and fixed rest Equipped with LED strip and connector for enhanced visibility Reflective strips for added safety Comes with photocells for safety Product Includes 1 x GGT80AGS Barrier Unit 1 x 803XA-0400 4.34m Aluminum Boom 1 x G02807 Fixed Rest 1 x 803XA-0020 LED Strip 1 x 803XA-0190 LED Connector 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x Instruction Guide Specifications Max Boom Length: 4m Boom Length: 4.34m Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 24v Duty Cycle: Intensive Category: Automatic Barrier Kit Advanced Technology The GT8 barrier kit features advanced technology, including an electromechanical motor and LED lighting for enhanced visibility. Applications This automatic barrier kit is suitable for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it ideal for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation. CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME GT4 Barrier Kit 24V | For Road Widths Up to 4m | Complete Automatic Barrier Kit

Product Overview The CAME GT4 Barrier Kit 24V is a comprehensive automatic barrier solution designed for road widths up to 4 meters. This kit includes everything needed for efficient and secure barrier operation. Featuring an electromechanical motor with an intensive duty cycle, the GT4 barrier ensures reliable performance in high-traffic areas. Key Features Complete automatic barrier kit for road widths up to 4 meters Fast opening times ranging from 2 to 6 seconds Electromechanical motor with an intensive duty cycle Includes a 4.22m aluminum boom and fixed rest Equipped with LED strip and connector for enhanced visibility Reflective strips for added safety Comes with photocells Product Includes 1 x GGT40AGS Barrier Unit 1 x 803XA-0270 4.22m Aluminum Boom 1 x G02807 Fixed Rest 1 x 803XA-0020 LED Strip 1 x 803XA-0190 LED Connector 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x Instruction Guide Specifications Max Boom Length: 3.75m Boom Length: 4m Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 24v Duty Cycle: Intensive Category: Automatic Barrier Kit Advanced Technology The GT4 barrier kit features advanced technology, including an electromechanical motor and LED lighting for enhanced visibility. Applications This automatic barrier kit is suitable for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it ideal for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation. CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME GARDPX4 Brushless Barrier Kit | Up to 4m Width | Deluxe Automatic Barrier

Product Overview The CAME GARDPX4 Brushless Barrier Kit is a premium automatic barrier system designed for widths up to 4 meters. Ideal for controlling vehicle access in both residential and commercial settings, this barrier kit combines speed, reliability, and durability with a sleek design. Featuring an electromechanical motor and a continuous duty cycle, the GARDPX4 ensures seamless operation and enhanced security. Key Features Complete brushless barrier kit for widths up to 4 meters Fast opening time ranging from 1.2 to 2.4 seconds Electromechanical motor with continuous duty cycle Includes a 4m aluminum boom and inner reinforcement Equipped with LED strip and crown for enhanced visibility Reflective strips for added safety Comes with electric lock and photocells Balancing spring included for smooth operation Product Includes 1 x 803BB-0120 Barrier Unit 1 x 803XA-0050 4m Aluminum Boom 1 x 803XA-0110 Inner Reinforcement 1 x G02807 Fixed Rest 1 x 803XA-0030 Electric Lock 1 x 803XA-0150 3m LED Strip 1 x 803XA-0010 LED Crown 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x G04060 Balancing Spring Specifications Max Boom Length: 3.8m Opening Time: 1.2 to 2.4 Seconds Boom Length: 4m Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 36v Duty Cycle: Continuous Category: Automatic Barrier Kit Advanced Technology The GARDPX4 barrier kit features advanced brushless motor technology, ensuring long-lasting performance with minimal maintenance. The included LED strip and crown enhance visibility, making it ideal for use in low-light conditions. The integrated photocells and electric lock add an extra layer of security, ensuring safe and controlled access at all times. Applications This automatic barrier kit is perfect for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it suitable for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GARDPX3 Brushless Barrier Kit | Up to 3m Width | Deluxe Automatic Barrier

Product Overview The CAME GARDPX3 Brushless Barrier Kit is a premium automatic barrier system designed for widths up to 3 meters. Ideal for controlling vehicle access in both residential and commercial settings, this barrier kit combines speed, reliability, and durability with a sleek design. Featuring an electromechanical motor and a continuous duty cycle, the GARDPX3 ensures seamless operation and enhanced security. Key Features Complete brushless barrier kit for widths up to 3 meters Fast opening time ranging from 1.2 to 2.4 seconds Electromechanical motor with continuous duty cycle Includes a 3m aluminum boom and inner reinforcement Equipped with LED strip and crown for enhanced visibility Reflective strips for added safety Comes with electric lock and photocells Balancing spring included for smooth operation Product Includes 1 x 803BB-0120 Barrier Unit 1 x 803XA-0051 3m Aluminum Boom 1 x 803XA-0110 Inner Reinforcement 1 x G02807 Fixed Rest 1 x 803XA-0030 Electric Lock 1 x 803XA-0150 3m LED Strip 1 x 803XA-0010 LED Crown 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x G04060 Balancing Spring Specifications Max Boom Length: 3.8m Opening Time: 1.2 to 2.4 Seconds Boom Length: 3m Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 36v Duty Cycle: Continuous Category: Automatic Barrier Kit Advanced Technology The GARDPX3 barrier kit features advanced brushless motor technology, ensuring long-lasting performance with minimal maintenance. The included LED strip and crown enhance visibility, making it ideal for use in low-light conditions. The integrated photocells and electric lock add an extra layer of security, ensuring safe and controlled access at all times. Applications This automatic barrier kit is perfect for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it suitable for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GARDPX2.5 Brushless Barrier Kit | Up to 2.5m Width | Deluxe Automatic Barrier

Product Overview The CAME GARDPX2.5 Brushless Barrier Kit is a premium automatic barrier system designed for widths up to 2.5 meters. Ideal for controlling vehicle access in both residential and commercial settings, this barrier kit combines speed, reliability, and durability with a sleek design. Featuring an electromechanical motor and a continuous duty cycle, the GARDPX2.5 ensures seamless operation and enhanced security. Key Features Complete brushless barrier kit for widths up to 2.5 meters Fast opening time ranging from 1.2 to 2.4 seconds Electromechanical motor with continuous duty cycle Includes a 2.5m aluminum boom and inner reinforcement Equipped with LED strip and crown for enhanced visibility Reflective strips for added safety Comes with electric lock and photocells Balancing spring included for smooth operation Product Includes 1 x 803BB-0120 Barrier Unit 1 x 803XA-0051C 2.5m Aluminum Boom 1 x 803XA-0110 Inner Reinforcement 1 x G02807 Fixed Rest 1 x 803XA-0030 Electric Lock 1 x 803XA-0150 3m LED Strip 1 x 803XA-0010 LED Crown 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x G04060 Balancing Spring Specifications Model: CAME GARDPX2.5 Max Boom Length: 2.5m Opening Time: 1.2 to 2.4 Seconds Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 36v Duty Cycle: Continuous Category: Automatic Barrier Kit Advanced Technology The GARDPX2.5 barrier kit features advanced brushless motor technology, ensuring long-lasting performance with minimal maintenance. The included LED strip and crown enhance visibility, making it ideal for use in low-light conditions. The integrated photocells and electric lock add an extra layer of security, ensuring safe and controlled access at all times. Applications This automatic barrier kit is perfect for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it suitable for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME Max Boom Length 3.8m Opening Time 1.2 to 4 Seconds Boom Length 3.8m Motor Electromechanical Power Supply Voltage 230v Motor Voltage 36v Duty Cycle Continuous Category Automatic Barrier Kit

Product Overview The CAME GARDPT4 Brushless Barrier Kit is a premium automatic barrier system designed for widths up to 3.8 meters. Ideal for controlling vehicle access in both residential and commercial settings, this barrier kit combines speed, reliability, and durability with a sleek design. Featuring an electromechanical motor and a continuous duty cycle, the GARDPT4 ensures seamless operation and enhanced security. Key Features Complete brushless barrier kit for widths up to 3.8 meters Fast opening time ranging from 1.2 to 4 seconds Electromechanical motor with continuous duty cycle Includes a 3.8m aluminum boom and inner reinforcement Equipped with LED strip and crown for enhanced visibility Reflective strips for added safety Comes with electric lock and photocells Balancing spring included for smooth operation Product Includes 1 x 803BB-0070 Barrier Unit 1 x 803XA-0050 4m Aluminum Boom 1 x 803XA-0110 Inner Reinforcement 1 x G02807 Fixed Rest 1 x 803XA-0030 Electric Lock 1 x 803XA-0150 3m LED Strip 1 x 803XA-0010 LED Crown 1 x G02809 Reflective Strips 1 x DIR10 Pair of Photocells 1 x 803XA-0070 Balancing Spring Specifications Model: CAME GARDPT4 Max Boom Length: 3.8m Opening Time: 1.2 to 4 Seconds Motor Type: Electromechanical Power Supply Voltage: 230v Motor Voltage: 36v Duty Cycle: Continuous Category: Automatic Barrier Kit Advanced Technology The GARDPT4 barrier kit features advanced brushless motor technology, ensuring long-lasting performance with minimal maintenance. The included LED strip and crown enhance visibility, making it ideal for use in low-light conditions. The integrated photocells and electric lock add an extra layer of security, ensuring safe and controlled access at all times. Applications This automatic barrier kit is perfect for a variety of applications, including residential driveways, commercial parking lots, and secure facility entrances. Its robust construction and reliable performance make it suitable for high-traffic areas requiring efficient vehicle access control. Replacement and Support This barrier kit can be used as a direct replacement for existing systems or as a new installation. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT Aluminum Full Height Skirt 1720mm | Complete with Junction Brackets

Product Overview The CAME GT Aluminum Full Height Skirt 1720mm is designed for CAME GT barriers, providing a complete full height skirt solution. Made from painted aluminum, this skirt ensures durability and enhances the security of your barrier system. The full height skirt measures 1200mm tall and 1720mm long, making it suitable for various applications. Key Features Full height skirt for CAME GT barriers Dimensions: 1200mm tall, 1720mm long Made from durable painted aluminum Complete with junction brackets for easy installation Enhances security and functionality of the barrier system Product Includes 1 x 1.72m Skirt 1 x Mechanical Stop 1 x Stop Plate 1 x Fixing Bar 5 x M4 Nuts 5 x M4 Washers 5 x M4 Screw 5 x Rivets Specifications Model: CAME GT Aluminum Full Height Skirt 1720mm Compatibility: For use with CAME GT Barriers Material: Painted Aluminum Dimensions: 1200mm tall, 1720mm long Includes: Junction brackets, mechanical stop, fixing bar, nuts, washers, screws, and rivets Application The CAME GT Aluminum Full Height Skirt is ideal for enhancing the security and functionality of CAME GT barriers. Its robust construction and complete installation kit make it a reliable choice for various barrier applications. Replacement and Support This full height skirt can be used as a direct replacement or addition to your existing GT barrier system. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT8 Break-Away Boom Support | Detachable Boom Support

Product Overview The CAME GT8 Break-Away Boom Support is designed for CAME GT8 barriers to enhance safety by allowing the boom to detach after an impact, resting safely on the ground. This feature helps prevent damage to the barrier system and reduces the risk of injury or further damage. Key Features Break-away boom support for CAME GT8 barriers Detaches boom after impact to prevent damage Boom rests safely on the ground Enhances safety and reduces repair costs Product Includes 1 x Detachable Bracket 1 x Securing Half-Ring 1 x Cover Plate 1 x Fastening Flange 2 x Countersunk Screw 2 x Self-Tapping Screw 4 x Head Screw Specifications Model: CAME GT8 Break-Away Boom Support Compatibility: For use with CAME GT8 Barriers Function: Detaches boom after impact Application The CAME GT8 Break-Away Boom Support is ideal for use in high-traffic areas where the risk of accidental impact is higher. By allowing the boom to detach upon impact, this support helps protect the barrier system and minimizes damage, ensuring continuous and reliable operation. Replacement and Support This break-away boom support can be used as a direct replacement or addition to your existing GT8 barrier system. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT4 Break-Away Boom Support | Detachable Boom Support

Product Overview The CAME GT4 Break-Away Boom Support is designed for CAME GT4 barriers to enhance safety by allowing the boom to detach after an impact, resting safely on the ground. This feature helps prevent damage to the barrier system and reduces the risk of injury or further damage. Key Features Break-away boom support for CAME GT4 barriers Detaches boom after impact to prevent damage Boom rests safely on the ground Enhances safety and reduces repair costs Product Includes 1 x Detachable Bracket 1 x Securing Half-Ring 1 x Cover Plate 1 x Fastening Flange 2 x Countersunk Screw 2 x Self-Tapping Screw 4 x Head Screw Specifications Model: CAME GT4 Break-Away Boom Support Compatibility: For use with CAME GT4 Barriers Function: Detaches boom after impact Application The CAME GT4 Break-Away Boom Support is ideal for use in high-traffic areas where the risk of accidental impact is higher. By allowing the boom to detach upon impact, this support helps protect the barrier system and minimizes damage, ensuring continuous and reliable operation. Replacement and Support This break-away boom support can be used as a direct replacement or addition to your existing GT4 barrier system. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT4 Articulated Joint | Heavy Duty Boom Joint for Restricted Height

Product Overview The CAME GT4 Articulated Joint is a heavy-duty boom joint designed for CAME GT4 barriers, specifically for installations with restricted height. This joint is suitable for 90mm x 60mm booms and provides the necessary flexibility and support to ensure smooth operation. Key Features Heavy-duty boom joint for CAME GT4 barriers Designed for restricted height installations Compatible with 90mm x 60mm booms Provides flexibility and support for smooth operation Product Includes 1 x Spacer For Swivel 1 x Rivets 2 x Swivel 1 x Rod 2 x Nut For Locking Rod 1 x Boom Cap 2 x Boom Head Plates 1 x Spacer Specifications Model: CAME GT4 Heavy Duty Boom Joint Compatibility: For use with CAME GT4 Barriers Boom Size: Suits 90mm x 60mm Booms Application The CAME GT4 Articulated Joint is ideal for use in restricted height environments where the standard boom length might not be feasible. It provides the necessary support and flexibility to ensure the barrier operates smoothly, even in challenging installation conditions. Replacement and Support This heavy-duty boom joint can be used as a direct replacement or addition to your existing GT4 barrier system. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT8 Battery Charger Set | Battery Backup Card and Housing

Product Overview The CAME GT8 Battery Charger Set is designed to provide reliable battery backup for CAME GT8 barriers during power outages. This set includes a control card for batteries, housing, and all necessary accessories to ensure seamless operation when the main power supply is unavailable. Batteries are sold separately under the code BAT2PK. Key Features Battery backup for CAME GT8 barriers Control card for efficient battery management Includes housing and all necessary accessories Ensures operation during power outages Batteries sold separately (BAT2PK) Product Includes 1 x Battery Support Bracket 1 x LBB Board 5 x Terminal Boards 3 x Cables 1 x DIN Bracket 1 x Screws Set 2 x Spare Fuses Specifications Model: CAME GT8 Battery Backup Card and Housing Compatibility: For use with CAME GT8 Barriers Battery Type: BAT2PK (sold separately) Application The CAME GT8 Battery Charger Set is ideal for ensuring continuous operation of CAME GT8 barriers in residential, commercial, and industrial settings. This set is essential for maintaining security and access control during power outages, providing peace of mind and reliability. Replacement and Support This battery backup set can be used as a direct replacement or addition to your existing GT8 barrier system. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT4 Battery Charger Set | Battery Backup Card and Housing

Product Overview The CAME GT4 Battery Charger Set is designed to provide reliable battery backup for CAME GT4 barriers during power outages. This set includes a control card for batteries, housing, and all necessary accessories to ensure seamless operation when the main power supply is unavailable. Batteries are sold separately under the code BAT2PK. Key Features Battery backup for CAME GT4 barriers Control card for efficient battery management Includes housing and all necessary accessories Ensures operation during power outages Batteries sold separately (BAT2PK) Product Includes 1 x Battery Support Bracket 1 x LBB Board 5 x Terminal Boards 3 x Cables 1 x DIN Bracket 1 x Screws Set 2 x Spare Fuses Specifications Model: CAME GT4 Battery Backup Card and Housing Compatibility: For use with CAME GT4 Barriers Battery Type: BAT2PK (sold separately) Application The CAME GT4 Battery Charger Set is ideal for ensuring continuous operation of CAME GT4 barriers in residential, commercial, and industrial settings. This set is essential for maintaining security and access control during power outages, providing peace of mind and reliability. Replacement and Support This battery backup set can be used as a direct replacement or addition to your existing GT4 barrier system. All components are brand new and sourced directly from the manufacturer. We offer full advice and technical support to assist you in installation and operation.

CAME GT8 Barrier customized RAL painted Complete Barrier GGT80ACS. 24v DC Motor with Encoder. Galvanised Steel. You Choose your RAL Colour. Balancing Spring Included. 803BB-0290. GT8 Custom. Max Net Clearance 7.8m. Kit includes Quantity Item 1 GT8 Barrier Uni

Product Overview The CAME GT8 Barrier Motor is a robust and efficient barrier system designed for extensive access control applications. This barrier motor features a 24V DC motor equipped with an encoder for precise control and operation. Constructed from galvanized steel, the GT8 Barrier Motor is finished in a customized RAL color of your choice, ensuring it blends seamlessly with your environment. Key Features 24V DC motor with encoder for accurate operation Customized RAL color for a personalized look Constructed from galvanized steel for durability Includes a balancing spring for optimal performance Maximum net clearance of 7.8 meters Kit Contents 1 x GT8 Barrier Unit 1 x Color to Order Cabinet 1 x Balancing Spring Specifications Model: GT8 Custom Motor Voltage: 24V DC Construction Material: Galvanized Steel Finish: Customized RAL Color Maximum Clearance: 7.8 meters Application The CAME GT8 Barrier Motor is suitable for various access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in large parking lots, gated communities, and commercial premises. The option to customize the RAL color ensures the barrier system fits perfectly with the aesthetics of your property. Replacement and Support This CAME GT8 Barrier Motor can be used as a direct replacement for your broken or damaged barrier motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer. We provide full advice and technical support to help you get your installation back up and running.

CAME GT4 Barrier Motor - Customized RAL Painted, 24V DC Motor with Encoder

Product Overview The CAME GT4 Barrier Motor is a versatile and efficient barrier system designed for various access control applications. This barrier motor features a 24V DC motor equipped with an encoder for precise control and operation. Constructed from galvanized steel, the GT4 Barrier Motor is finished in a customized RAL color of your choice, ensuring it blends seamlessly with your environment. Key Features 24V DC motor with encoder for accurate operation Customized RAL color for a personalized look Constructed from galvanized steel for durability Includes a balancing spring for optimal performance Maximum net clearance of 4 meters Kit Contents 1 x GT4 Barrier Unit 1 x Color to Order Cabinet 1 x Balancing Spring Specifications Model: GT4 Custom Motor Voltage: 24V DC Construction Material: Galvanized Steel Finish: Customized RAL Color Maximum Clearance: 4 meters Application The CAME GT4 Barrier Motor is suitable for various access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in parking lots, gated communities, and commercial premises. The option to customize the RAL color ensures the barrier system fits perfectly with the aesthetics of your property. Replacement and Support This CAME GT4 Barrier Motor can be used as a direct replacement for your broken or damaged barrier motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer. We provide full advice and technical support to help you get your installation back up and running.

CAME GT8 Stainless Barrier Motor - 24V DC Motor with Encoder, AISI 316

Product Overview The CAME GT8 Stainless Barrier Motor is a robust and efficient barrier system designed for extensive access control applications. This barrier motor features a 24V DC motor equipped with an encoder for precise control and operation. Constructed from high-grade AISI 316 stainless steel with a satin-finish, the GT8 Stainless Barrier Motor ensures exceptional durability and a sleek appearance. Key Features 24V DC motor with encoder for accurate operation Constructed from AISI 316 stainless steel for enhanced durability and corrosion resistance Satin-finish for a modern and professional look Includes a balancing spring for optimal performance Maximum net clearance of 7.8 meters Kit Contents 1 x GT8 Barrier Unit 1 x Stainless 316 Cabinet 1 x Balancing Spring Specifications Model: GT8 Stainless 316 Motor Voltage: 24V DC Construction Material: AISI 316 Stainless Steel Finish: Satin-Finish Maximum Clearance: 7.8 meters Application The CAME GT8 Stainless Barrier Motor is suitable for various extensive access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in large parking lots, gated communities, and commercial premises, particularly in environments where corrosion resistance is crucial. Replacement and Support This CAME GT8 Stainless Barrier Motor can be used as a direct replacement for your broken or damaged barrier motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer. We provide full advice and technical support to help you get your installation back up and running. Fast Delivery If you are confident that you have the correct part and model, place your order before 2pm for next working day delivery, subject to stock availability.

CAME GT4 Stainless Barrier Motor - 24V DC Motor with Encoder, AISI 316

Product Overview The CAME GT4 Stainless Barrier Motor is a durable and efficient barrier system designed for various access control applications. This barrier motor features a 24V DC motor equipped with an encoder for precise control and operation. Constructed from high-grade AISI 316 stainless steel with a satin-finish, the GT4 Stainless Barrier Motor ensures exceptional durability and a sleek appearance. Key Features 24V DC motor with encoder for accurate operation Constructed from AISI 316 stainless steel for enhanced durability and corrosion resistance Satin-finish for a modern and professional look Includes a balancing spring for optimal performance Maximum net clearance of 4 meters Kit Contents 1 x GT4 Barrier Unit 1 x Stainless 316 Cabinet 1 x Balancing Spring Specifications Model: GT4 Stainless 316 Motor Voltage: 24V DC Construction Material: AISI 316 Stainless Steel Finish: Satin-Finish Maximum Clearance: 4 meters Application The CAME GT4 Stainless Barrier Motor is suitable for various access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in parking lots, gated communities, and commercial premises, especially in environments where corrosion resistance is crucial. Replacement and Support This CAME GT4 Stainless Barrier Motor can be used as a direct replacement for your broken or damaged barrier motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer. We provide full advice and technical support to help you get your installation back up and running. Fast Delivery If you are confident that you have the correct part and model, place your order before 2pm for next working day delivery, subject to stock availability.

CAME GT8 Stainless Barrier Motor - 24V DC Motor with Encoder, AISI 304

Product Overview The CAME GT8 Stainless Barrier Motor is a robust and efficient barrier system designed for extensive access control applications. This barrier motor features a 24V DC motor equipped with an encoder for precise control and operation. Constructed from high-grade AISI 304 stainless steel with a satin-finish, the GT8 Stainless Barrier Motor ensures exceptional durability and a sleek appearance. Key Features 24V DC motor with encoder for accurate operation Constructed from AISI 304 stainless steel for enhanced durability and corrosion resistance Satin-finish for a modern and professional look Includes a balancing spring for optimal performance Maximum net clearance of 7.8 meters Kit Contents 1 x GT8 Barrier Unit 1 x Stainless 304 Cabinet 1 x Balancing Spring Specifications Model: GT8 Stainless 304 Motor Voltage: 24V DC Construction Material: AISI 304 Stainless Steel Finish: Satin-Finish Maximum Clearance: 7.8 meters Application The CAME GT8 Stainless Barrier Motor is suitable for various extensive access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in large parking lots, gated communities, and commercial premises, particularly in environments where corrosion resistance is crucial. Replacement and Support This CAME GT8 Stainless Barrier Motor can be used as a direct replacement for your broken or damaged barrier motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer. We provide full advice and technical support to help you get your installation back up and running. Fast Delivery If you are confident that you have the correct part and model, place your order before 2pm for next working day delivery, subject to stock availability.

CAME GT4 Stainless Barrier Motor - 24V DC Motor with Encoder, AISI 304

Product Overview The CAME GT4 Stainless Barrier Motor is a durable and efficient barrier system designed for various access control applications. This barrier motor comes with a 24V DC motor equipped with an encoder for precise control and operation. Constructed from high-grade AISI 304 stainless steel with a satin-finish, the GT4 Stainless Barrier Motor ensures exceptional durability and a sleek appearance. Key Features 24V DC motor with encoder for accurate operation Constructed from AISI 304 stainless steel for enhanced durability and corrosion resistance Satin-finish for a modern and professional look Includes a balancing spring for optimal performance Maximum net clearance of 4 meters Kit Contents 1 x GT4 Barrier Unit 1 x Stainless 304 Cabinet 1 x Balancing Spring Specifications Model: GT4 Stainless Motor Voltage: 24V DC Construction Material: AISI 304 Stainless Steel Finish: Satin-Finish Maximum Clearance: 4 meters Application The CAME GT4 Stainless Barrier Motor is suitable for various access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in parking lots, gated communities, and commercial premises, especially in environments where corrosion resistance is crucial. Replacement and Support This CAME GT4 Stainless Barrier Motor can be used as a direct replacement for your broken or damaged barrier motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer. We provide full advice and technical support to help you get your installation back up and running. Fast Delivery If you are confident that you have the correct part and model, place your order before 2pm for next working day delivery, subject to stock availability.

CAME GT8 Barrier Motor - 24V DC Motor with Encoder

Product Overview The CAME GT8 Barrier Motor is a powerful and reliable barrier system designed for extensive access control applications. This barrier motor features a 24V DC motor equipped with an encoder for precise control and operation. Constructed from galvanized steel and painted in RAL 7024, the GT8 Barrier Motor offers exceptional durability and a professional appearance. Key Features 24V DC motor with encoder for accurate operation Constructed from galvanized steel for enhanced durability Painted in RAL 7024 for a sleek and professional look Includes a balancing spring for optimal performance Maximum net clearance of 7.8 meters Kit Contents 1 x GT8 Barrier Unit 1 x RAL 7024 Cabinet 1 x Balancing Spring Specifications Model: GT8 Motor Voltage: 24V DC Construction Material: Galvanized Steel Paint: RAL 7024 Maximum Clearance: 7.8 meters Application The CAME GT8 Barrier Motor is suitable for various extensive access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in large parking lots, gated communities, and commercial premises. Replacement and Support This FAAC 844 R 3PH 109896 gearmotor can be used as a direct replacement for your broken or damaged sliding gate motor. All of our gate motors are brand new, genuine, and sourced directly from the manufacturer in the UK. We provide full advice and technical support to help you get your installation back up and running. Fast Delivery If you are confident that you have the correct part and model, place your order before 2pm for next working day delivery, subject to stock availability.

CAME GT4 Barrier Motor - 24V DC Motor with Encoder

Product Overview The CAME GT4 Barrier Motor is a robust and efficient barrier system designed for use in various access control applications. This barrier motor comes with a 24V DC motor equipped with an encoder for precise control and operation. Constructed from galvanised steel and painted in RAL 7024, the GT4 Barrier Motor ensures durability and long-lasting performance. Key Features 24V DC motor with encoder for accurate operation Constructed from galvanised steel for enhanced durability Painted in RAL 7024 for a sleek and professional look Includes a balancing spring for optimal performance Maximum net clearance of 4 meters Kit Contents 1 x GT4 Barrier Unit 1 x RAL 7024 Cabinet 1 x Balancing Spring Specifications Model: GT4 Motor Voltage: 24V DC Construction Material: Galvanised Steel Paint: RAL 7024 Maximum Clearance: 4 meters Application The CAME GT4 Barrier Motor is suitable for various access control applications, including residential, commercial, and industrial settings. Its robust construction and reliable operation make it an ideal choice for managing vehicular access in parking lots, gated communities, and commercial premises.

ROGER TECHNOLOGY BI/008 Bionik Brushless Barrier | Up to 8 Meters | 36V DC | Barrier Only

Product Overview The BI/008 Bionik Brushless Barrier is engineered for super-intensive use, capable of extending up to 8 meters. Powered by a robust 36V DC motor, this barrier includes a built-in digital control panel and encoder, ensuring reliable and efficient operation for large-scale applications. Note that the product does not include a boom, but it is compatible with BA/128/4 booms and requires a KT244 fixing plate. Key Features Super intensive use capability Extended reach up to 8 meters Robust 36V DC brushless motor High reliability and efficiency Compatible with BA/128/4 booms Specifications SpecificationBI/008 Barrier Length Up to 8 mt Power Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption Max. 18A Power Rating 300W Torque 10 - 400 N m Operating Temperature -20 to +55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 9 - 29 sec Control Unit CTRL Digital Controller 36V DC Encoder Digital native + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Details Cabinet painted RAL9006 arabesque grey, head and boom support in black arabesque silver paint, boom painted RAL9010 matt Release System European Key cylinder Battery Recovery Available (optional) Synchronization BUS Master/Slave synchronization Operating Cycles (24 hours) 2500 cycles Dimensions (L x W x H) 500 x 270 x 1237 mm Weight 104.7 kg Accessories Below are the accessories suitable for the BI/008 Series: KT244: Fixing plate with stay bolts and screws for BI/008. ALED/8C: 8-metre LED strip with connection cable for barrier boom (red colour). BAFS/01: Fixed support for bars. BAFS/02: Fixing support, adjustable. BAFS/03: Fixing support with bolt predisposition for bars. BAFS/04: Fixing support adjustable, with bolt predisposition for bars. BAMS/01: Mobile support for bars. BARK/02: Barrier skirting in aluminum, with stainless steel screws mounted on bronze bushings. Single module of length 2 meters. BT12V45: Battery 12V 4.5 Ah (1 pc). DLD1/24: Single loop detector. DLD2/24: Dual loop detector. BI/BAT/KIT: Kit for emergency batteries charger for brushless digital controller CTRL 36V DC with plug-in card, with 2 recovery batteries 12V DC, 4.5 Ah. Kit for BIONIK barrier. BI/BCHP: Plug-in card, batteries charger, for brushless digital controller CTRL 36V DC, without recovery batteries, for BIONIK barrier. B73/LTM: RGB boom light and traffic light control device for CTRL. ALED/8C/RGB: 8-metre multicoloured RGB LED strip with connection cable for barrier boom. BI/BLED/8/RGB: Multicoloured RGB LED strip with connection cable for BI/008 barrier header. CRA/BAR/M90: Post for photocells M90/F2ESO - M90/F4ESO for spaced installation on a barrier cabinet (+23 cm). Additional Information For more details on the BI/008 Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/006 Series Bionik Brushless Barriers | 36V DC | Up to 6 Meters | Barrier Only

Product Overview The BI/006 Series Bionik Brushless Barriers are designed for managing booms up to 6 meters, making them ideal for high-traffic zones and parking solutions. These 36V DC barriers are built for super intensive use, offering up to 4000 operating cycles daily. The BI/006 series features two versions, including the BI/006 with a painted RAL9006 cabinet and the BI/006/IS with a brushed stainless steel AISI 304 housing unit. Variants BI/006 - Compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. BI/006/IS - Stainless steel housing, compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. Key Features Intuitive operation Adaptable design Super intensive use capability Aesthetic finish High reliability and durability Battery backup available Specifications SpecificationBI/006BI/006/IS Barriers Up to 6 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 220W Frequency of Use Super intensive use Torque 10 - 300 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 4 - 8 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 4000 cycles Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 75.1 Kg 73.6 Kg Accessories Below are the accessories suitable for the BI/006 Series: KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/006 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/004 Series Bionik Brushless Barriers | 36V DC | Up to 4 Meters | Barrier Only

Product Overview The BI/004 Series Bionik Brushless Barriers are engineered for managing booms up to 4 meters, making them ideal for high-traffic zones and parking solutions. Equipped with control units and encoders, these 36V DC barriers are built for super intensive use. Note that each product variant does not include a boom, and separate models are suitable for different booms and require specific fixing plates. Variants BI/004 - Suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004/IS - Stainless steel housing, suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004HP - Super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230 fixing plate. BI/004HP/IS - Brushed stainless steel AISI 304 housing unit, super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230/IS fixing plate. Key Features Brushless motor Super intensive use capability Rapid movement Superior construction Safety and reliability Battery backup available Specifications SpecificationBI/004BI/004/ISBI/004HPBI/004HP/IS Barriers Up to 4 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption 0-15A max. 15A 0-15A max. 15A Power Rating 220W Frequency of Use Continuous use Continuous use Super intensive use Super intensive use Torque 0 - 200 N m 0 - 200 N m 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: plastic RAL9005; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 5000 cycles 5000 cycles Accessories Below are the accessories suitable for the BI/004 Series: KT240: Fixing plate for BI/004 and BI/004/IS models KT230: Fixing plate for BI/004HP and KT230/IS for BI/004HP/IS B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/004 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/001 Series Bionik Brushless Barriers | 36V DC | Up to 3 Meters | Barrier Only

Product Overview The BI/001 Series Bionik Brushless Barriers are designed for super intensive use, capable of managing booms up to 3 meters long. Equipped with onboard digital control panels, encoders, and superior construction quality, these barriers are ideal for modern parking solutions and high-traffic zones. Note that each product variant does not come with a boom, and specific models require different booms and fixing plates. Variants BI/001PE - Suitable for elliptical boom (BA/90/3). Requires KT230 fixing plate. BI/001PC - Designed for cylindrical boom arm (BA/60/3). Requires KT230 fixing plate. Key Features Rapid movement Brushless motor Superior construction Safety first High capacity Battery backup Specifications SpecificationBI/001PEBI/001PC Barriers Up to 3 mt long Up to 3 mt long Power Line Supply 230V AC - 50Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 450W Frequency of Use Super-intensive use to Continuous use Super-intensive use to Continuous use Torque 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 IP54 Reductor Type Irreversible Irreversible Opening Time at 90° 2 ÷ 4 (sec) 1 ÷ 3 (sec) Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 74.7 Kg 87.6 Kg Accessories Power Supply 24V DC Operating Cycles per Day 8000 cycles 12000 cycles Standard Accessories for BI/001PE KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PE SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Standard Accessories for BI/001PC KT230: Fixing plate for BI series SP/61/01: Spring for barriers B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PC BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector BA/60/3: Aluminium barrier arm BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit KT242: Cable passage kit for barriers CRA/BAR: Photocell post for barriers ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Barrier stickers pack B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Photocell post for M90 series Additional Information For more details on the BI/001 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY Fixed Support Post for Bionik Boom Arms | Various Configurations

Product Overview The fixed support posts for Bionik barrier boom arms are designed to provide robust and reliable support for various boom arm configurations. Available in multiple models, these support posts cater to different installation needs, including adjustable options, bolt predisposition, and vandal-proof features. Each support post ensures stability and durability, enhancing the performance and longevity of your Bionik barrier system. Key Features Multiple configurations available Adjustable and fixed options Bolt predisposition for easy installation Vandal-proof model with magnetic suction cup and demagnetizer card Designed for compatibility with Bionik barrier boom arms Durable construction for long-lasting use Product Description The Fixed Support Posts for Bionik Boom Arms are essential components for maintaining the stability and functionality of your barrier system. These support posts are available in various configurations to meet specific installation requirements: Product Guide Product CodeDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Specifications ModelDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Installation and Usage Each fixed support post is designed for easy installation and compatibility with Bionik barrier boom arms. The adjustable models allow for precise alignment, while the bolt predisposition versions simplify the mounting process. The vandal-proof model (BAFS/05) includes a magnetic suction cup and a B72/DGS demagnetizer card, providing enhanced security and reliability in high-risk environments. Additional Information For more details on the fixed support posts for Bionik boom arms or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

BFT MAXIMA ULTRA 68 | Automatic Barrier 230v | Barrier Only (without spring)

Product Overview The BFT MAXIMA ULTRA 68 Automatic Barrier is a multi-purpose heavy system suitable for car parks, industrial sites, tolls, and many other large-scale secure sites. Designed for clear drive-through gaps from 4m to 8m, this 230v electromechanical barrier is adaptable yet robust, capable of operating in adverse weather and temperature environments. This version is supplied without a spring. Key Features Capable of 30,000 cycles per day Robust metal outer casing Handles temperature extremes from -30°C to +60°C IP54 level protection Single crank machine mechanism with mechanical locking system Impact reaction for opening and closing U-Link compatible for integration with control systems Integrated heater for low temperatures Control panel compatible with BFT CSB-Xtreme Opening time of 4.5 - 6 seconds depending on boom length Product Description The BFT MAXIMA ULTRA 68 Automatic Barrier offers a reliable and efficient solution for managing vehicle access in various environments, including car parks, industrial sites, and toll areas. Powered by a 230v three-phase induction motor, this barrier is designed for intensive use, with a mean cycles between failure (MCBF) of 2,000,000 movements. The Maxima Ultra 68 features a robust metal outer casing and can operate in temperature extremes from -30°C to +60°C, providing consistent performance in all weather conditions. Specifications and Range Comparison ModelMAXIMA ULTRA 35MAXIMA ULTRA 36MAXIMA ULTRA 68 Useful Passage 1.7m to 5m 2m to 6m 4m to 8m Control Unit CSB Xtreme CSB Xtreme CSB Xtreme Motor Type Three-phase induction Asynchronous three-phase motor Three-phase induction Opening/Closing Time 0.7 - 3 seconds 0.7 - 3.9 seconds 4.5 - 6 seconds Gear Unit Type In oil bath In oil bath In oil bath MCBF 5,000,000 movements 7,000,000 movements 2,000,000 movements Motor Power Supply 230v 230v 230v Slowdown In opening and closing Soft opening and closing In opening and closing Impact Reaction Encoder Encoder Encoder Lock Mechanical Mechanical Mechanical Release Inside the structure Inside the structure Inside the structure Frequency of Use 20,000 op/day (up to 3m), 5,000 op/day (up to 5m) 20,000 (@3m), 5,000 (@6m) movements per day 30,000 op/day Ambient Conditions -30°C +60°C -30°C +60°C -30°C +60°C Protection Rating IP54 IP54 IP54 Barrier Only Maxima Ultra 35 Barrier Maxima Ultra 36 Barrier Maxima Ultra 68 Barrier Additional Information The entire Maxima Ultra 68 barrier system is compatible with BFT’s U-LINK system, allowing you to link all automation products into a single PC-based control platform. The barrier is powered by the BFT CSB-Xtreme control panel, dedicated to serving three-phase motor-powered barriers. The mechanical movement of the Maxima Ultra 68 features a single crank machine mechanism that ensures smooth operation of the boom, with a mechanical locking system for added security. Additional Purchase Information

NICE Road Barrier System SBAR - Bar up to 4m - With Steel Case

S-BarElectromechanical road barrier system for road access control.For 4 m bars. Gearmotor, 24 VDC, with integrated control unit. Strength and reliability: sturdy steel structure, new robust balancing springs guaranteed to 500.000 cycles and elliptical section bar with high resistance to gusts of wind. Optional flashing light for integrated installation in cover. Easier programming and maintenance: separate compartments for the electronics and mechanics protect internal parts from possible hazards.Quick and easy access to the control unit locat-ed in the top part of the barrier body.The photocells, completely invisible from the outside, are fixed simply in place in the recesses provided in the barrier body. More reliability and safety: obstacle detec-tion and monitoring of motor draw throughout automation movement.Automatic fault diagnosis during operation and subsequent indication of type through different combinations of flashes.Provision for connection of latest generation optical and resistive sensitive edges (8.2 KOhm resistance). Energy saving: when the system is not in use, it switches to stand-by mode, reducing power consumption. No blackouts: operation in event of power failures with the optional batteries housed under the control unit. Side release with Nice triangular key: can be installed on either side.

NICE M5BAR | Road Barrier System for Bars up to 5m with Steel Case

Product Overview The NICE M5BAR is an electromechanical road barrier system designed for the control of road access with bars up to 5m. It features a 24 Vdc gear motor with a built-in control unit and loop detector, making it suitable for intensive use. This complete automatic barrier kit includes a 4m aluminium boom and additional accessories to ensure reliable and efficient operation. Key Features Electromechanical road barrier system Suitable for bars up to 5m 24 Vdc gear motor with built-in control unit and loop detector Steel case with protective cataphoresis treatment and paint finish Modular design with easily assembled aluminium expansion joint Robust structure with high strength balancing springs Guaranteed up to 1,000,000 opening and closing operations Elliptical section bar with high wind-gust resistance Encoder movement control and electromechanical limit switches Average opening time of 3 to 6 seconds Product Description NICE M5BAR Road Barrier System for Bars up to 5m The NICE M5BAR road barrier system is an advanced solution for controlling road access with bars up to 5m. This system features an electromechanical motor with a 24 Vdc gear motor and a built-in control unit and loop detector, ensuring smooth and reliable operation. The barrier system is designed for intensive use, with an average opening time ranging from 3 to 6 seconds. Complete Automatic Barrier Kit The M5BAR-KIT includes everything you need for a complete road barrier system. Inside the box, you will find: 1 x M5BAR Barrier Unit 1 x Internal Control Unit 2 x XBA Aluminium Boom 1 x XBA9 Expansion Joint 1 x WA10 Reflective Strips 1 x WA11 Fixed Rest The steel case with protective cataphoresis treatment and paint finish ensures durability and is suitable for intensive use. The modular design allows for easy assembly using the aluminium expansion joint. Strength and Reliability The NICE M5BAR barrier system is built with a robust structure and high strength balancing springs, guaranteeing up to 1,000,000 opening and closing operations. The elliptical section bar provides high wind-gust resistance, ensuring reliable performance in various weather conditions. Advanced Control Features The barrier system includes encoder movement control and electromechanical limit switches for precise operation and enhanced safety. These features ensure the barrier operates smoothly and efficiently, providing a reliable solution for road access control.

FAAC B680L8MKIT | 24V Hydraulic Barrier for Large Beams Up to 8m

Product Overview The FAAC B680L8MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 8 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 8 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Two-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L8MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 8 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a two-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The two-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 8 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Two-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L8MKIT are available for precise installation and setup.

FAAC B680L7MKIT | 24V Hydraulic Barrier for Large Beams Up to 7m

Product Overview The FAAC B680L7MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 7 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 7 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Two-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L7MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 7 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a two-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The two-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 7 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Two-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L7MKIT are available for precise installation and setup.

FAAC B680L6MKIT | 24V Hydraulic Barrier for Large Beams Up to 6m

Product Overview The FAAC B680L6MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 6 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 6 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Two-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L6MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 6 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a two-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The two-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 6 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Two-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L6MKIT are available for precise installation and setup.

FAAC B680L5MKIT | 24V Hydraulic Barrier for Large Beams Up to 5m

Product Overview The FAAC B680L5MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 5 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 5 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L5MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 5 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 5 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L5MKIT are available for precise installation and setup.

FAAC B680S5MKIT | 24V Hydraulic Barrier for Beams Up to 5m

Product Overview The FAAC B680S5MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 5 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 5 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S5MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 5 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 5 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S5MKIT are available for precise installation and setup.

FAAC B680S4MKIT | 24V Hydraulic Barrier for Beams Up to 4m

Product Overview The FAAC B680S4MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 4 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 4 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S4MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 4 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 4 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S4MKIT are available for precise installation and setup.

FAAC B680S3MKIT | 24V Hydraulic Barrier for Beams Up to 3m

Product Overview The FAAC B680S3MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 3 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 3 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S3MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 3 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 3 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S3MKIT are available for precise installation and setup.

FAAC B680S2MKIT | 24V Hydraulic Barrier for Beams Up to 2m

Product Overview The FAAC B680S2MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 2 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 2 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S2MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 2 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 2 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S2MKIT are available for precise installation and setup.

BPT CAME-CAT-X24 | 24V Bollard with Operator and On-Board Control Panel

Product OverviewThe BPT CAME-CAT-X24 is a 24V bollard equipped with an operator and on-board control panel, designed to offer advanced automation and reliable performance. Ideal for securing and managing access in various environments, this bollard integrates seamlessly with CAME automation systems.Key Features24V operational voltage for efficient performance.Integrated operator with on-board control panel for streamlined automation.Complies with CAME Automotive Barrier Directives & Barrier Installation Safety Notes.Requires professional installation to ensure safety and optimal functionality.Product DescriptionBPT CAME-CAT-X24 | Bollard with Operator (24V) and Control PanelThe BPT CAME-CAT-X24 bollard is designed to provide robust and efficient access control with a 24V operational voltage. This bollard is equipped with an integrated operator and an on-board control panel, ensuring advanced automation and reliable operation. Ideal for a range of applications, from residential to commercial settings, the CAME-CAT-X24 bollard offers enhanced security and ease of use.The bollard's operator and control panel are designed to comply with the CAME Automotive Barrier Directives & Barrier Installation Safety Notes, ensuring that all safety standards are met. It is essential to read these directives and safety notes prior to purchasing and installing any gate automation product to avoid serious injury.Professional installation is required to ensure the correct setup and operation of the bollard. Qualified professionals should use the appropriate tools and materials during installation to maintain safety and functionality. The CAME-CAT-X24 bollard is a reliable and advanced solution for automated access control, providing efficient and secure management of entry points.Technical SpecificationsSpecificationDetailsOperational Voltage24VFor further information and to download the CAME Automotive Barrier Directives & Barrier Installation Safety Notes, please refer to the Attachments tab above.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

Faac J200 HA 600 | Retractable Bollard | Painted Steel for Access Control

Product Overview The Faac J200 HA 600 retractable bollard is designed for residential access control, offering intelligent traffic regulation while maintaining aesthetic appeal. This versatile bollard is easy to ship, stock, and install, and provides reliable performance with simplified maintenance. Key Features Ideal for residential applications with intelligent control and minimal aesthetic impact. Streamlined design, configurable with a variety of installation accessories. Lightweight for ease of transport, storage, and installation. Self-supporting structure eliminates the need for pits, simplifying placement. 5mm thick steel cylinder with cataphoresis treatment and painted finish. Available in standard painted steel (RAL 7021 dark grey metallic) or stainless steel. Hydraulic lock in the raised position for security during power failures, with a special release key. Easy maintenance, manageable by a single person. Product Description Faac J200 HA 600 | Retractable Bollard | Painted Steel for Access Control The Faac J200 HA 600 retractable bollard is part of the J200 range, which includes hydraulic, semi-automatic, and fixed versions. This automatic bollard is particularly suited for residential areas, providing secure and intelligent access control without compromising on aesthetic value. The bollard can be activated by authorized personnel or automatically at preset times, offering flexible control options. The J200 HA 600 is designed for ease of installation and maintenance. Its lightweight construction allows for straightforward shipping and storage, while the self-supporting structure means it can be installed without the need for a pit. The 5mm thick steel cylinder is treated with cataphoresis and painted in RAL 7021 dark grey metallic, ensuring durability and resistance to corrosion. In the event of a power failure, the hydraulic lock secures the bollard in the raised position, and a special release key allows for manual operation. Maintenance is simplified and can be performed by a single person, making the J200 HA 600 a practical and efficient solution for residential access control. Technical Specifications SpecificationDetails Duty Residential Diameter 200 mm Cylinder Stroke 600 mm Finish Painted Steel or Brushed Stainless Steel Rise Time 5 sec Descent Time 7 sec The Faac J200 HA 600 retractable bollard provides a robust and intelligent solution for residential access control, combining ease of use with durable construction and aesthetic design. Product Details 5 mm thick steel cylinder with cataphoresis treatment and painted finish. Powder coated in dark grey metallic RAL 7021. Hydraulic lock in the raised position with a special release key. Support structure to be cemented, eliminating the need for pits. For more information or to find the best model for your needs, please contact our Technical Department at 01564 731 035.

Faac 116006 | J Series Automatic Bollard | J275/600 Painted Steel

Product Overview The Faac J275/600 automatic bollard, part of the J Series, is designed for intensive use and is easily installed and maintained. This bollard features a robust painted steel finish and is equipped with advanced functionalities to ensure high performance and reliability in demanding environments. Key Features Intensive use bollard with easy installation and maintenance. Drive unit mounted within the cylinder for compact design. Equipped with 12 built-in flashing LEDs, buzzer, emergency release, and mechanical release. Unique sectional foundation boxes for flexible installation. Standard descent time of 3.5 seconds, with an option for rapid descent in 1.2 seconds. Withstands traffic from all directions. Fast connectors for low and high voltage for quick connection/disconnection. Limit switches for up and down positions to indicate bollard status at any time. Product Description Faac 116006 - J Series Automatic Bollard J275/600 Painted Steel The Faac J275/600 automatic bollard is an ideal solution for intensive use scenarios, providing robust security and control for traffic management. The bollard features a painted steel finish, ensuring durability and resistance to environmental conditions. The drive unit is seamlessly integrated within the cylinder, maintaining a sleek and compact appearance. This automatic bollard includes 12 built-in flashing LEDs and a buzzer for enhanced visibility and alerting. In the event of an emergency, the bollard is equipped with an emergency release and mechanical release for immediate response. The foundation boxes are uniquely sectional, allowing for flexible and straightforward installation. The bollard offers a standard descent time of 3.5 seconds, with an additional rapid descent setting allowing the bollard to descend in just 1.2 seconds. It can withstand traffic from all directions, ensuring comprehensive security. Fast connectors for both low and high voltage facilitate rapid connection and disconnection, streamlining installation and maintenance processes. With limit switches for both the up and down positions, the status of the bollard is easily monitored, ensuring reliable operation at all times. This makes the Faac J275/600 bollard a versatile and dependable choice for high-traffic environments. Technical Specifications SpecificationDetails Duty Intensive use Diameter 275 mm Cylinder Stroke 600 mm / 800 mm Finish Painted Steel or Brushed Stainless Steel Rise Time 5 sec Std Descent Time 3.5 sec Selectable Fast Descent 1.2 sec Crash Resistance 128 KJ (Steel) / 207 KJ (Stainless Steel) The Faac J275/600 automatic bollard is engineered to provide reliable and efficient traffic control and security, making it an essential addition to high-traffic environments requiring robust security solutions.

CAME Gard 12 G12000 | 24V Barrier in Galvanised and Painted Steel | Intensive Use

Product OverviewThe CAME Gard 12 G12000 is a high-performance 24V barrier designed for exceptional passages and intensive use. Constructed from galvanised and painted steel, this barrier is built to withstand harsh conditions while providing smooth, safe, and reliable operation. Featuring dual gear motors installed inside the cabinet and mounted on the same axis, the Gard 12 offers increased motor torque and enhanced performance.Key Features24V barrier designed for intensive use.Constructed from galvanised and painted steel for durability and corrosion resistance.Dual gear motors provide greater motor torque.Smooth, safe, and reliable boom movement.Special modular counterweight spring balancing system, adjustable based on boom length.Product DescriptionCAME Gard 12 G12000 | 24V Barrier in Galvanised and Painted Steel | Intensive UseThe CAME Gard 12 G12000 is engineered to deliver exceptional performance for demanding applications. Its robust construction from galvanised and painted steel ensures long-lasting durability and resistance to environmental factors. This barrier is ideal for managing high-traffic areas, thanks to its dual gear motors that provide enhanced motor torque and efficient operation.The Gard 12 features a modular counterweight spring balancing system, which can be adjusted based on the length of the boom, ensuring smooth and balanced movement. The 24V system is designed for intensive use, making it suitable for commercial and industrial environments where reliable and consistent performance is essential.Technical SpecificationsSpecificationDetailsPower Supply24VMaterialGalvanised and Painted SteelMotor TypeDual Gear MotorsUse FrequencyIntensiveSpecial FeaturesModular Counterweight Spring Balancing SystemThe CAME Gard 12 G12000 barrier is the ideal solution for high-traffic areas requiring a durable and reliable barrier system. Its advanced features and robust construction ensure smooth and efficient operation, making it a dependable choice for various commercial and industrial applications.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

BPT CAME-G0461 | Red Phosphorescent Strips | Pack of 24

Product Overview The BPT CAME-G0461 red phosphorescent strips are designed to enhance the safety and visibility of gate automation systems. These durable adhesive strips are ideal for marking gates and barriers, making them more visible, especially in low light conditions. Supplied in a convenient pack of 24, these strips are easy to apply and ensure long-lasting performance. Key Features Red phosphorescent strips for enhanced visibility Adhesive backing for easy application Supplied in a pack of 24 strips Ideal for gate automation safety Durable and long-lasting Product Description The BPT CAME-G0461 red phosphorescent strips are a crucial addition to any gate automation system, providing improved safety and visibility. These strips are designed to be easily applied to gates and barriers, thanks to their adhesive backing. The phosphorescent material ensures that the strips remain visible even in low light conditions, helping to prevent accidents and enhance overall safety. Each pack contains 24 strips, providing ample coverage for multiple gates or barriers. These strips are durable and designed to withstand various environmental conditions, ensuring they remain effective over time. For optimal results, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Technical Specifications Product Code: CAME-G0461 Color: Red Material: Phosphorescent adhesive Quantity: 24 strips per pack Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

CAME G6501 | 24V Stainless Steel Barrier Motor with Control Panel | Up to 6.5m

Product OverviewThe CAME G6501 is a high-performance stainless steel barrier motor designed for gates with a passage width of up to 6.5 meters. This 24V DC gearmotor features a built-in control panel, ensuring reliable and efficient operation. Made from satin-coated AISI 304 stainless steel, the CAME G6501 barrier motor is built to withstand various environmental conditions, providing long-lasting durability. With an opening time of 4 to 8 seconds, this barrier motor offers quick and efficient gate operation.Key Features24V DC gearmotor with built-in control panelSatin-coated AISI 304 stainless steel constructionSuitable for gates up to 6.5 meters in widthQuick opening time of 4 to 8 secondsSet up for fitting accessoriesReliable and durable for various environmental conditionsProduct DescriptionThe CAME G6501 is engineered to provide a robust and efficient automation solution for barrier gates. Designed for gates with a passage width of up to 6.5 meters, this 24V DC gearmotor ensures smooth and reliable operation. The built-in control panel simplifies installation and integration, offering a seamless automation experience.Constructed from satin-coated AISI 304 stainless steel, the CAME G6501 barrier motor is highly durable and resistant to environmental factors. The motor operates with a quick opening time of 4 to 8 seconds, making it ideal for both residential and commercial applications where efficiency and reliability are crucial.For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing and installing the product.Technical SpecificationsPower Source: 230 V - 50/60 HzMax. Power: 400 WPower Draw when idle: 110 mAMaximum Power for 24 V accessories: 40 WCircuit Insulation Class: IIContainer Material: ABSContainer Protection Rating: IP54Working Temperature: -20°C to +55°CInstallation and SafetyPlease ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

BPT CAME-G028401 | LED Lighting Section for Barrier Arms (Per Metre)

Product Overview The BPT CAME-G028401 LED lighting section is designed to enhance the visibility and safety of barrier arms. This luminous cord is ideal for illuminating barrier arms, making them more visible in low light conditions and improving overall safety. Sold per metre, the BPT CAME-G028401 is a versatile addition to any gate automation system. Key Features LED lighting section for enhanced visibility Ideal for barrier arms Sold per metre for customized installation Improves safety in low light conditions Durable and reliable performance Product Description The BPT CAME-G028401 LED lighting section is an essential accessory for enhancing the visibility and safety of barrier arms. Designed specifically for barrier arms, this luminous cord provides bright and reliable illumination, making barriers more noticeable and improving safety, especially in low light conditions. Sold per metre, the BPT CAME-G028401 allows for customized installation to fit the specific length of your barrier arm. This LED lighting section is easy to install and offers durable performance, ensuring long-lasting visibility enhancement for your barrier system. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product. Technical Specifications Product Code: CAME-G028401 Type: LED Lighting Section Application: Barrier Arms Length: Sold per metre Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

BPT CAME-G06080 | Balancing Spring | 55mm Diameter

Product Overview The BPT CAME-G06080 balancing spring is designed to provide essential support and balance for gate automation systems. With a diameter of 55mm, this durable spring ensures smooth and balanced operation of barriers and gate arms, enhancing the overall functionality and reliability of the system. Key Features Balancing spring for gate automation systems 55mm diameter for optimal balance and support Enhances smooth and reliable operation Durable construction for long-lasting performance Product Description The BPT CAME-G06080 balancing spring is an integral component for maintaining the balance and smooth operation of gate automation systems. Specifically designed with a 55mm diameter, this spring provides the necessary tension and support to ensure that barriers and gate arms function efficiently and reliably. Constructed from high-quality materials, the BPT CAME-G06080 spring is built to withstand regular use and harsh environmental conditions, ensuring long-lasting performance. Whether you are installing a new gate automation system or replacing a broken spring, the BPT CAME-G06080 offers a dependable solution. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product. Technical Specifications Product Code: CAME-G06080 Type: Balancing Spring Diameter: 55mm Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

BPT CAME-G02807 | Fixed Barrier Support for G8000

Product Overview The BPT CAME-G02807 fixed barrier support is specifically designed for the G8000 series, providing reliable stability and support for gate barriers. This durable support ensures the proper functioning and longevity of your gate automation system, making it an essential accessory for maintaining barrier integrity. Key Features Fixed barrier support for the G8000 series Provides reliable stability and support Enhances the longevity and functionality of gate barriers Durable construction for long-lasting performance Product Description The BPT CAME-G02807 fixed barrier support is an essential component for ensuring the stability and proper operation of G8000 series gate barriers. Designed to provide strong and reliable support, this fixed barrier support enhances the durability and functionality of your gate automation system. The robust construction of the BPT CAME-G02807 ensures that it can withstand regular use and various environmental conditions, making it a dependable choice for both residential and commercial applications. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-G02807 Type: Fixed Barrier Support Designed For: G8000 Series Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

BPT CAME-G02809 | Reflective Adhesive Strips for G8000 | Pack of 20

Product Overview The BPT CAME-G02809 reflective adhesive strips are designed to enhance the visibility and safety of G8000 series gate barriers. These durable red adhesive strips are easy to apply and significantly improve the visibility of barriers, especially in low-light conditions. Supplied in a convenient pack of 20, these strips are an essential accessory for ensuring the safety and effectiveness of your gate automation system. Key Features Reflective adhesive strips for enhanced visibility Designed specifically for G8000 series gate barriers Easy to apply with strong adhesive backing Supplied in a pack of 20 strips Improves safety in low-light conditions Durable and long-lasting performance Product Description The BPT CAME-G02809 reflective adhesive strips are an essential addition to any G8000 series gate barrier, providing improved visibility and safety. These red adhesive strips are designed to reflect light, making barriers more noticeable and reducing the risk of accidents. The strong adhesive backing ensures that the strips stay securely in place, even in harsh weather conditions. Each pack contains 20 strips, offering ample coverage for multiple barriers. The strips are easy to apply, making it a simple process to enhance the safety and visibility of your gate automation system. For optimal results, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-G02809 Type: Reflective Adhesive Strips Color: Red Designed For: G8000 Series Quantity: 20 strips per pack Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

BPT CAME-G4040Z | 24V Barrier Unit with PCB | Up to 3.75m

Product OverviewThe BPT CAME-G4040Z is a high-performance 24V barrier unit designed for gates with a passage width of up to 3.75 meters. This robust barrier unit includes a built-in PCB and is made from galvanised and painted steel for enhanced durability. The G4040Z barrier is fitted to accommodate additional accessories, providing a versatile and efficient solution for gate automation systems.Key Features24V barrier unit for gates up to 3.75 metersIncludes built-in PCB for integrated controlConstructed from galvanised and painted steel for durabilityFitted to take additional accessoriesReliable performance in various environmental conditionsProduct DescriptionThe BPT CAME-G4040Z barrier unit is engineered to provide efficient and reliable gate automation for barriers up to 3.75 meters in width. This 24V unit features a built-in PCB, simplifying the control and integration of the barrier system. Constructed from galvanised and painted steel, the G4040Z offers excellent resistance to environmental conditions, ensuring long-lasting performance.The barrier unit is designed to accommodate additional accessories, providing flexibility and customization options for various installation requirements.For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing and installing the product to ensure compliance with all safety standards and guidelines.Technical SpecificationsProduct Code: CAME-G4040ZType: Barrier UnitPower Supply: 24VMax Gate Width: 3.75 metersMaterial: Galvanised and Painted SteelIncludes: Built-In PCBInstallation and SafetyPlease ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

BPT CAME-G2080IZ | 24V Stainless Steel Barrier Unit | Up to 7.6m

Product OverviewThe BPT CAME-G2080IZ is a high-performance 24V barrier unit designed for gates with a passage width of up to 7.6 meters. Constructed from AISI 304 stainless steel with a satin finish, this barrier unit ensures durability and resistance to environmental conditions. The G2080IZ includes a built-in PCB and is designed to accommodate additional accessories, providing a versatile and efficient solution for gate automation systems.Key Features24V barrier unit for gates up to 7.6 metersConstructed from AISI 304 stainless steel with a satin finishIncludes built-in PCB for integrated controlSupports additional accessories for customizationDurable and resistant to environmental conditionsProduct DescriptionThe BPT CAME-G2080IZ barrier unit is engineered to provide efficient and reliable gate automation for barriers up to 7.6 meters in width. This 24V unit features a built-in PCB, simplifying the control and integration of the barrier system. The AISI 304 stainless steel construction with a satin finish offers excellent resistance to corrosion and environmental conditions, ensuring long-lasting performance.Designed to accommodate additional accessories, the G2080IZ provides flexibility and customization options for various installation requirements. The system offers comprehensive control and monitoring capabilities for enhanced convenience and security.For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing and installing the product to ensure compliance with all safety standards and guidelines.Technical SpecificationsProduct Code: CAME-G2080IZType: Barrier UnitPower Supply: 24VMax Gate Width: 7.6 metersMaterial: AISI 304 Stainless SteelFinish: SatinIncludes: Built-In PCBInstallation and SafetyPlease ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.CAME Connect RGSM unit available with this kit for an additional cost – please call for details