BENINCA 24v 5m Intensive use Complete barrier kit KLADY.5

LADY 5m ROAD BARRIER Intensive duty 24v – 5m barrier Product Details: 24 Vdc barrier for intensive use Integrated control unit and battery charger  Easy installation and possibility of quick connection for operation of opposed barriers, thanks to the SIS accessory board Simple, fast and reliable boom balancing system Adjustable slow-downs For passages up to 5.0 m Barriers Our automatic and manual rising arm barriers work to control traffic at the entry point of car parking facilities or commercial properties. Barriers are a great solution for ensuring only authorised vehicles can gain access to secure sites. We also have several options available with boom lengths ranging from under 3 metres, up to 8 metres wide.  

MicroBrain Intelligent ITS-AX4 Vehicle Detection Radar

Product Overview The ITS-AX4 is an advanced 79GHz millimeter wave radar proximity sensor designed for vehicle detection and presence monitoring in barrier gate systems. This wireless detection sensor provides automated control and safety features for boom barrier gates through intelligent vehicle sensing and barrier controller integration. Key Features Advanced 79GHz millimeter wave radar technology for precise vehicle detection and tracking Versatile operating voltage range of 9-24V DC with typical 12V/1A operation Comprehensive detection range with horizontal width of ±0.5~±1.5m (configurable) and vertical length of 1-6m Robust environmental protection with IP66 rating for all-weather operation Dual interface support with RS485 and Bluetooth connectivity for easy configuration and updates Compact and lightweight design measuring 107.9*73.6*17.2mm and weighing only 137g Wide operating temperature range from -40°C to +85°C Low power consumption under 2.8W for efficient operation Technical Specifications System Performance Working Voltage: 9~24V DC (Typical value 12V/1A) Power Consumption: < 2.8W Operating Frequency: 79GHz Protection Rating: IP66 Physical Specifications Dimensions: 107.9*73.6*17.2mm Weight: 137g Detection Range: Horizontal ±0.5~±1.5m, Vertical 1~6m Key Advantages Universal Ground Compatibility: Performs reliably on various surfaces including sand, stone, and snow-covered ground All-Weather Operation: Features advanced algorithms for automatic weather condition adaptation Enhanced Detection Stability: Utilizes focused wave technology with narrow antenna pitch angle (±15° to ±9°) Superior Environmental Protection: High-grade waterproof and dustproof design for reliable operation in harsh conditions Wireless Configuration: Bluetooth connectivity enables convenient real-time adjustments and monitoring Simplified Maintenance: Supports one-click debugging and firmware upgrading through both RS485 and Bluetooth interfaces Applications The ITS-AX1 is compatible with all types of barrier gates, including: Advertising Barrier Gates Fence Barrier Gates Straight Barrier Gates Telescopic Barrier Gates Installation and Setup Installation of the ITS-AX4 requires no ground modifications or construction work. The sensor connects directly to the barrier gate controller through a simple plug-and-play process. For optimal performance, careful attention should be paid to the installation steps and positioning guidelines provided in the user manual. Safety Features When installed as an anti-fall radar system, the ITS-AX4 provides continuous monitoring to ensure the safety of both vehicles and pedestrians beneath the barrier arm. The sensor's rapid response time and precise detection capabilities help prevent accidents and damage during barrier gate operation. Package Contents 1 x ITS-AX4 Vehicle Detection Sensor Installation Hardware User Manual Quick Start Guide  

FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right or Left hand)

FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right hand F/9879DXL or Left hand F/9879SXL) Two beams cut to measure, complete with joint, arm and cable. For driveways up to 6 m, beam up to 6.400 mm, for BAYT 980 automatic, right-hand and left-hand versions.  

BFT BOOM-PS Boom Arm for the Maxima Ultra 36 (3/4/5/6 meters)

BFT BOOM-PS Boom Arm for the Maxima Ultra 36 (3/4/5/6 meters) We know barriers are quite often in need of repair due to damage, we would like to make it easy for you to buy the parts you need. This is a replacement boom arm for Maxima Ultra 36, and it comes in 4 sizes: 3, 4, 5 and 6 meters. 2 Year guarantee.  

BFT MAXIMA ULTRA 68 Boom Arm and Extension Piece | 2/6/8 Meters

Product Overview The BFT MAXIMA ULTRA 68 Boom Arm and Extension Piece are designed to replace damaged parts and keep your barrier system functional. These replacement parts are available in various sizes to meet your specific needs. Key Features Available in 2 meters, 6 meters, and 8 meters (with extension piece) Easy to replace and install High-quality construction for durability 2-year guarantee Product Description The BFT MAXIMA ULTRA 68 boom arm and extension piece are essential components for maintaining the efficiency and functionality of your barrier system. Given the frequent need for repairs due to damage, these replacement parts ensure that you can easily and quickly restore your barrier to working condition. These parts come in three options: BOOM-ATML60 6m Boom Arm: Standard boom arm replacement for Maxima Ultra 68. BOOM-ATML-EXT 2m Extension Piece: Extension piece for extending the boom arm's length. BOOM-ATML60 + BOOM-ATML-EXT 8m Boom + Extension Piece: Combined set for an 8-meter reach. Each option is designed for easy installation, ensuring that you can quickly get your barrier system back up and running. Manufactured with high-quality materials, these parts provide long-lasting performance and reliability. Compatibility Maxima Ultra 68 Guarantee These products come with a 2-year guarantee, providing peace of mind and assurance of their quality and durability. Special Offer

BFT Maxima Ultra Single Boom Arm Holder | Replacement Part for Ultra 35, 36, 68

Product Overview The BFT Maxima Ultra Single Boom Arm Holder is a replacement part designed to fit the Maxima Ultra 35, Maxima Ultra 36, and Maxima Ultra 68 models. Barriers often require repairs due to damage, and this replacement part ensures your barrier system remains functional and efficient. Key Features Compatible with Maxima Ultra 35, Maxima Ultra 36, and Maxima Ultra 68 models Easy to replace and install Provides secure and stable boom arm support Manufactured to meet high-quality standards 2-year guarantee Product Description This BFT Maxima Ultra Single Boom Arm Holder serves as a reliable replacement part for your barrier system. Whether your barrier has sustained damage or needs maintenance, this single boom arm holder is designed to fit seamlessly with the Maxima Ultra 35, Maxima Ultra 36, and Maxima Ultra 68 models. The boom arm holder ensures the boom arm is securely and stably supported, maintaining the integrity of your barrier system. Manufactured to high-quality standards, it guarantees durability and long-lasting performance. Compatibility Maxima Ultra 35 (MAXIMA-OMEGA-ATM-XT) Maxima Ultra 36 (MAXIMA-OMEGA-PS-MU36) Maxima Ultra 68 (MAXIMA-OMEGA-ATML-XT) Guarantee This product comes with a 2-year guarantee, ensuring you receive a high-quality replacement that you can trust. Special Offer

BFT BOOM-ATM Boom arm for Maxima Ultra 35 (3 or 5 meters)

BFT BOOM-ATM Boom arm for Maxima Ultra 35 (3 or 5 meters) We know barriers are quite often in need of repair due to damage, we would like to make it easy for you to buy the parts you need. This is a replacement boom arm for Maxima Ultra 35, and it comes in 3 lengths: 3 and 5 meters.   NOTE: ‘BFT no longer supply the 4M option in the ATM boom range, they suggest purchasing a 5M ATM boom and cutting it down to 4 2 Year guarantee.  

BFT MAXIMA Boom with 180° articulation and red/green LED light kit (3/5 meters)

BFT Boom with 180° articulation and red/green LED light kit (3/5 meters) We know barriers are quite often in need of repair due to damage, we would like to make it easy for you to buy the parts you need. This is a replacement boom arm with 180° articulation and red/green LED lights for Maxima Ultra 35, and it comes in 2 lengths: 3 and 5 meters. NOTE: PSU and red rubber lower profile are required 2 Year guarantee.   We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

BFT MAXIMA Boom with 90° articulation and red/green LED light kit (3/5 meters)

BFT Boom with 90° articulation and red/green LED light kit (3/5 meters) We know barriers are quite often in need of repair due to damage, we would like to make it easy for you to buy the parts you need. This is a replacement boom arm with 90° articulation and red/green LED lights for Maxima Ultra 35, and it comes in 2 lengths: 3 and 5 meters. NOTE: PSU and red rubber lower profile are required 2 Year guarantee.   We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.  

BFT PCA Protective Profile Strip for the boom arm for Michelangelo and Giotto barriers

BFT PCA Protective Profile Strip for the boom arm for Michelangelo and Giotto barriers - covers upper and lower boom Available in 4 sizes:  3 meters, 5 meters, 6 meters and 8 meters Used for Michelangelo and Giotto barriers. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

Fadini BAYT 980 Automatic Barrier with Variable Options

Fadini BAYT 980 Barrier Oil-hydraulic road barrier with beams from 3m up to 8m depending on speed (faster means smaller beam). OIL-HYDRAULIC SAFETY 230 Vac oil-hydraulic operator, motor-pump and piston integrated in the assembly. Ideal for those installations where heavy duty specifications are to meet: car parks, private and public driveways, residential, urban and industrial areas. Various speed options, slowdown on opening and closing. ROBUST Reinforced structure made of powder coated steel to ensure a greater resistance to weathering or AISI 304 brushed stainless steel. Anodized aluminium beams with oval section, available in various lengths and coming with an aluminium expanding joint; high strength against winds. VERSATILE Wide range of accessories: beam with a fence underneath, beam with incorporated LED lights highly visible in dark conditions (flashing option as traffic lights on request), folding device for roofed applications, swing-away arm fastening plate preventing breakage in case of vehicle collision. QUICK INSTALLATION The electronic control board is located in the upper part of the housing in a dedicated and separated box. “master/slave” option available on request for opposing barriers. HANDY A version of this model can be fully operated by hands (max. beam length 6,40 m without fence). Ideal for places where no electric power supply is available. SPECIFICATIONS Power Supply 230V AC - 50Hz Absorbed power 510 W Absorbed current 2.4 A Power output 0,37 kW (0,5 HP) Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type FADINI oil Oil reservoir volume 2.5 litres Colour Variable - choose in options (Stainless Steel or Orange) Frequency of use very intensive   PRODUCT INCLUDES AND ADDITIONAL INFORMATION AISI 304 STAINLESS STEEL RAL 2002 / 9006 SW3061 Housing cabinet with door Two keys Motor-pump-piston assembly COS 982 Electronic control board ELPRO 980 Voltage cut-off switch Power supply and ground cables Flanged fastening plate to hold the aluminium beam  Stainless steel anchoring base plate with rag bolts and nuts Zinc-coated anchoring base plate with rag bolts and nuts    Blue LED light incorporated into the housing  The barrier body, top cover and door are AISI 304 brushed stainless steel. The barrier body is cataphoresis treated and polyester powder coated in two colours, body in RAL 2002 orange red, while top cover and door are 9006 SW3061 textured grey.   Beam and accessories (folding and fixed pedestals, etc.) not included; consult the specific section in the catalogue.      PRODUCT CODE LIST RAL VERSION CODE (click to see) STAINLESS STEEL CODE (click to see) VERSION SPEED (s) PISTON PUMP BEAM LIMIT (m) access width [ ] FENCE REINFORCEMENT BEAM CABLES KIT COUNTERWEIGHTS (10 kg each) F/9801DXL F/9811DXL right-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9801SXL F/9811SXL left-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9802DXL F/9812DXL right-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9802SXL F/9812SXL left-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9803DXL F/9813DXL right-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9803SXL F/9813SXL left-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9804DXL F/9814DXL right-handed    14  ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9804SXL F/9814SXL left-handed    14 ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9805DXL F/9815DXL right-handed     19 ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L F/9805SXL F/9815SXL left-handed     19  ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L

CAME GT8 Barrier Arm - 4.34m in length

CAME GT8 ALUMINIUM BOOM 4.34M For CAME GT8 Barriers. White Painted Aluminum Boom. 130mm x 85mm. With Internal Reinforcement. Groove Cover Strip. Shock Proof Rubber Profile. 4340mm Long. 803XA-0400.  

CAME GT8 Telescopic Barrier Arm - 7.8m max length

CAME GT8 TELESCOPIC BOOM 4.22M+4.34M For CAME GT8 Barriers. White Painted Aluminium Boom. Modular Telescopic Boom. Complete with Cap. 1 part 4220mm long. 1 part 4340mm long. 803XA-0420.  

CAME GT8 Barrier Arm - 6.35m in length

CAME GT8 ALUMINIUM BOOM 6.35M For CAME GT8 Barriers. White Painted Aluminium Boom. 130mm x 85mm. With Internal Reinforcement. Groove Cover Strip. Shock Proof Rubber Profile. 6350mm Long. 803XA-0410.

CAME GT4 Barrier Arm - 4.22m in length

CAME GT4 ALUMINIUM BOOM 4.22M For CAME GT4 Barriers. White Painted Aluminum Boom. 90mm x 60mm. With Internal Reinforcement. Groove Cover Strip. Shock Proof Rubber Profile. 4220mm Long. 803XA-0270.

CAME GT8 LED Strip for 8m Arm - illuminates Red & Green

CAME GT8 LED BOOM STRIP 8M For CAME GT8 Barriers. LED Strip for Booms up to 8m long. Fits into the Boom. Red & Green LED's.

CAME GT8 LED Strip for 6.5m Arm - illuminates Red & Green

CAME GT8 LED BOOM STRIP 6.5M For CAME GT8 Barriers. LED Strip for Booms up to 6.5m long. Fits into the Boom. Red & Green LED's.

CAME GT4 LED Strip for 4m Arm - illuminates Red & Green

CAME GT4 LED BOOM STRIP 4M For CAME GT4 Barriers. LED Strip for Booms up to 4m long. Fits into the Boom. Red & Green LED's.  

ROGER TECHNOLOGY BI/006 Series Bionik Brushless Barriers | 36V DC | Up to 6 Meters | Barrier Only

Product Overview The BI/006 Series Bionik Brushless Barriers are designed for managing booms up to 6 meters, making them ideal for high-traffic zones and parking solutions. These 36V DC barriers are built for super intensive use, offering up to 4000 operating cycles daily. The BI/006 series features two versions, including the BI/006 with a painted RAL9006 cabinet and the BI/006/IS with a brushed stainless steel AISI 304 housing unit. Variants BI/006 - Compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. BI/006/IS - Stainless steel housing, compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. Key Features Intuitive operation Adaptable design Super intensive use capability Aesthetic finish High reliability and durability Battery backup available Specifications SpecificationBI/006BI/006/IS Barriers Up to 6 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 220W Frequency of Use Super intensive use Torque 10 - 300 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 4 - 8 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 4000 cycles Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 75.1 Kg 73.6 Kg Accessories Below are the accessories suitable for the BI/006 Series: KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/006 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/004 Series Bionik Brushless Barriers | 36V DC | Up to 4 Meters | Barrier Only

Product Overview The BI/004 Series Bionik Brushless Barriers are engineered for managing booms up to 4 meters, making them ideal for high-traffic zones and parking solutions. Equipped with control units and encoders, these 36V DC barriers are built for super intensive use. Note that each product variant does not include a boom, and separate models are suitable for different booms and require specific fixing plates. Variants BI/004 - Suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004/IS - Stainless steel housing, suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004HP - Super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230 fixing plate. BI/004HP/IS - Brushed stainless steel AISI 304 housing unit, super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230/IS fixing plate. Key Features Brushless motor Super intensive use capability Rapid movement Superior construction Safety and reliability Battery backup available Specifications SpecificationBI/004BI/004/ISBI/004HPBI/004HP/IS Barriers Up to 4 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption 0-15A max. 15A 0-15A max. 15A Power Rating 220W Frequency of Use Continuous use Continuous use Super intensive use Super intensive use Torque 0 - 200 N m 0 - 200 N m 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: plastic RAL9005; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 5000 cycles 5000 cycles Accessories Below are the accessories suitable for the BI/004 Series: KT240: Fixing plate for BI/004 and BI/004/IS models KT230: Fixing plate for BI/004HP and KT230/IS for BI/004HP/IS B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/004 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/001 Series Bionik Brushless Barriers | 36V DC | Up to 3 Meters | Barrier Only

Product Overview The BI/001 Series Bionik Brushless Barriers are designed for super intensive use, capable of managing booms up to 3 meters long. Equipped with onboard digital control panels, encoders, and superior construction quality, these barriers are ideal for modern parking solutions and high-traffic zones. Note that each product variant does not come with a boom, and specific models require different booms and fixing plates. Variants BI/001PE - Suitable for elliptical boom (BA/90/3). Requires KT230 fixing plate. BI/001PC - Designed for cylindrical boom arm (BA/60/3). Requires KT230 fixing plate. Key Features Rapid movement Brushless motor Superior construction Safety first High capacity Battery backup Specifications SpecificationBI/001PEBI/001PC Barriers Up to 3 mt long Up to 3 mt long Power Line Supply 230V AC - 50Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 450W Frequency of Use Super-intensive use to Continuous use Super-intensive use to Continuous use Torque 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 IP54 Reductor Type Irreversible Irreversible Opening Time at 90° 2 ÷ 4 (sec) 1 ÷ 3 (sec) Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 74.7 Kg 87.6 Kg Accessories Power Supply 24V DC Operating Cycles per Day 8000 cycles 12000 cycles Standard Accessories for BI/001PE KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PE SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Standard Accessories for BI/001PC KT230: Fixing plate for BI series SP/61/01: Spring for barriers B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PC BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector BA/60/3: Aluminium barrier arm BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit KT242: Cable passage kit for barriers CRA/BAR: Photocell post for barriers ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Barrier stickers pack B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Photocell post for M90 series Additional Information For more details on the BI/001 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY Fixed Support Post for Bionik Boom Arms | Various Configurations

Product Overview The fixed support posts for Bionik barrier boom arms are designed to provide robust and reliable support for various boom arm configurations. Available in multiple models, these support posts cater to different installation needs, including adjustable options, bolt predisposition, and vandal-proof features. Each support post ensures stability and durability, enhancing the performance and longevity of your Bionik barrier system. Key Features Multiple configurations available Adjustable and fixed options Bolt predisposition for easy installation Vandal-proof model with magnetic suction cup and demagnetizer card Designed for compatibility with Bionik barrier boom arms Durable construction for long-lasting use Product Description The Fixed Support Posts for Bionik Boom Arms are essential components for maintaining the stability and functionality of your barrier system. These support posts are available in various configurations to meet specific installation requirements: Product Guide Product CodeDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Specifications ModelDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Installation and Usage Each fixed support post is designed for easy installation and compatibility with Bionik barrier boom arms. The adjustable models allow for precise alignment, while the bolt predisposition versions simplify the mounting process. The vandal-proof model (BAFS/05) includes a magnetic suction cup and a B72/DGS demagnetizer card, providing enhanced security and reliability in high-risk environments. Additional Information For more details on the fixed support posts for Bionik boom arms or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

BFT GIOTTO ULTRA 36 Automatic Electromechanical Barrier Kit (24v)

Giotto Ultra 36 Automatic Barrier Kits (24v) The Giotto Ultra 36 automatic barriers are available in kits. These are suitable for semi-intensive usage for a clear drive through gap of up to 6m. These barriers equipped with 24v DC motors bring the best of BFT's reliable engineering and merges it with a tough outer casing and ample barrier boom. The control panel is mounted at the top of the cabinet for easier access and is protected by a solid aluminium housing. OPENING TIME The Giotto Ultra 36 barriers feature fast opening speeds, making them ideal for high-traffic installations in commercial and industrial settings. The system provides high-precision movement control via encoder technology, ensuring excellent impact resistance and safety compliance. ADDITIONAL INFORMATION The programming of the internal control panel allows quick and precise installations. The control panel can be programmed with just a few options on the display, saving time and providing great results. These barriers feature advanced connectivity which allows users to program from a single platform. This is invaluable when managing a site with multiple points of entry. SPECIFICATIONS   GIOTTO ULTRA 36 BT 4M KIT GIOTTO ULTRA 36 XL 6M KIT Useful Passage 2m - 4m 4m - 6m Control Unit Internal control panel Motor power supply 24v Type Fast electromechanical barrier Spring Type Light spring Heavy spring Impact reaction Encoder Lock Mechanical Frequency of use Semi-intensive Protection rating IP54 KIT INCLUDES KIT INCLUDES GIOTTO ULTRA 36 BT 4M KIT GIOTTO ULTRA 36 XL 6M KIT 1x Giotto Ultra BT B barrier 1x Giotto Ultra BT B barrier 1x Internal control panel 1x Internal control panel 1x Light spring 1x Heavy spring 1x Barrier arm (2m-4m) 1x Barrier arm (4m-6m) 1x Fixed rest or swinging leg 1x Fixed restor swinging leg OPTIONAL ACCESSORIES Choose between fixed rest or swinging leg option in options: Fixed Rest: Standard support for the barrier arm when in closed position Swinging Leg: Articulated support that follows the movement of the barrier arm  

BFT BOOM-ATT Round Boom for Michelangelo Barrier | 6/8 meters

Product Overview The BFT BOOM-ATT is a replacement round boom specifically designed for the Michelangelo automatic barriers. Recognizing that barrier arms can often be subject to damage, we provide easy access to the parts you need. This round boom is available in several options to suit different barrier configurations and lengths. Key Features Replacement round boom for BFT Michelangelo barriers Available in various lengths and diameters Options for first and second boom sections Suitable for both Michelangelo 60 and Michelangelo 80 models 2-year guarantee for peace of mind Available Options BOOM-ATT704: 4.3m round barrier arm, 1st boom section – 70mm diameter (For Michelangelo 60 and 80) BOOM-ATT502: 2.45m round barrier arm, 2nd boom section – 50mm diameter (For Michelangelo 60) BOOM-ATT504: 4.6m round barrier arm, 2nd boom section - 50mm diameter (For Michelangelo 80) BOOM-ATT706: 6m 1 piece round boom (For Michelangelo 60 and 80) Specifications ModelLengthDiameterCompatibility BOOM-ATT704 4.3m 70mm Michelangelo 60 and 80 BOOM-ATT502 2.45m 50mm Michelangelo 60 BOOM-ATT504 4.6m 50mm Michelangelo 80 BOOM-ATT706 6m 70mm Michelangelo 60 and 80 Product Description The BFT BOOM-ATT Round Boom is a high-quality replacement arm for Michelangelo barriers, ensuring your barrier system remains fully functional and reliable. The round booms are designed to withstand intensive use, providing a robust solution for high-traffic environments. With options for different lengths and sections, these booms are versatile and compatible with both the Michelangelo 60 and Michelangelo 80 barrier models. Each boom comes with a 2-year guarantee, assuring you of its durability and performance. Whether you need a 4.3m section or a complete 6m boom, the BOOM-ATT range offers the flexibility to meet your specific requirements. Order before 2pm for next working day delivery, subject to stock availability. Ensure your barrier system is always in top condition with our easy-to-install replacement booms.

CAME Mobile support for bars G02808

CAME Barrier Boom Support G2808 Ideal for supporting the tip of the barrier arm when a post can not be installed.

BPT CAME-G028401 | LED Lighting Section for Barrier Arms (Per Metre)

Product Overview The BPT CAME-G028401 LED lighting section is designed to enhance the visibility and safety of barrier arms. This luminous cord is ideal for illuminating barrier arms, making them more visible in low light conditions and improving overall safety. Sold per metre, the BPT CAME-G028401 is a versatile addition to any gate automation system. Key Features LED lighting section for enhanced visibility Ideal for barrier arms Sold per metre for customized installation Improves safety in low light conditions Durable and reliable performance Product Description The BPT CAME-G028401 LED lighting section is an essential accessory for enhancing the visibility and safety of barrier arms. Designed specifically for barrier arms, this luminous cord provides bright and reliable illumination, making barriers more noticeable and improving safety, especially in low light conditions. Sold per metre, the BPT CAME-G028401 allows for customized installation to fit the specific length of your barrier arm. This LED lighting section is easy to install and offers durable performance, ensuring long-lasting visibility enhancement for your barrier system. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product. Technical Specifications Product Code: CAME-G028401 Type: LED Lighting Section Application: Barrier Arms Length: Sold per metre Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

BPT CAME-G06080 | Balancing Spring | 55mm Diameter

Product Overview The BPT CAME-G06080 balancing spring is designed to provide essential support and balance for gate automation systems. With a diameter of 55mm, this durable spring ensures smooth and balanced operation of barriers and gate arms, enhancing the overall functionality and reliability of the system. Key Features Balancing spring for gate automation systems 55mm diameter for optimal balance and support Enhances smooth and reliable operation Durable construction for long-lasting performance Product Description The BPT CAME-G06080 balancing spring is an integral component for maintaining the balance and smooth operation of gate automation systems. Specifically designed with a 55mm diameter, this spring provides the necessary tension and support to ensure that barriers and gate arms function efficiently and reliably. Constructed from high-quality materials, the BPT CAME-G06080 spring is built to withstand regular use and harsh environmental conditions, ensuring long-lasting performance. Whether you are installing a new gate automation system or replacing a broken spring, the BPT CAME-G06080 offers a dependable solution. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product. Technical Specifications Product Code: CAME-G06080 Type: Balancing Spring Diameter: 55mm Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

BENINCA 24v 4m Intensive use Complete barrier kit KLADY

LADY 4m ROAD BARRIER Intensive duty 24v – 4m barrier Product Details: 24 Vdc barrier for intensive use Integrated control unit and battery charger  Easy installation and possibility of quick connection for operation of opposed barriers, thanks to the SIS accessory board Simple, fast and reliable boom balancing system Adjustable slow-downs For passages up to 4.0 m Barriers Our automatic and manual rising arm barriers work to control traffic at the entry point of car parking facilities or commercial properties. Barriers are a great solution for ensuring only authorised vehicles can gain access to secure sites. We also have several options available with boom lengths ranging from under 3 metres, up to 8 metres wide.

BENINCA Articulated boom arm joint kit LADY.SN

2 Year guarantee

BENINCA KEVA.5 | 24V 5m Complete Barrier Kit

Product Overview The BENINCA KEVA.5 24V 5m Complete Barrier Kit is designed for intensive duty road barriers, featuring a 24Vdc motor with an integrated control panel and external release. This barrier kit ensures efficient and reliable operation, suitable for various applications including parking lots, commercial properties, and residential areas. Key Features Right or Left Handed: The barrier can be easily re-handed to suit installation requirements. Top Access Control Panel: Allows easy and fast programming. Integrated Dual Height Photocells: Built into the barrier case for enhanced safety. 24Vdc Motor: Suitable for intensive duty with the option for battery backup system. Amperometric Sensing: Obstacle detection system for safety. Fast-Acting Manual Release: New design for quick manual operation. Optional Flashing Lights: Available for the boom arm and barrier case. Adjustable Mechanical Stops: Two adjustable stops for precise operation. Boom Arm Balancing System: Simple, quick, and reliable balancing of the boom arm. Specifications FeatureDescription Motor Supply 24Vdc Barrier Length 5 meters Control Panel Access Top Access Obstacle Detection Amperometric Sensing Photocells Integrated Dual Height Manual Release Fast-Acting Optional Flashing Lights Boom Arm and Barrier Case Mechanical Stops 2 Adjustable Battery Backup Ready What's in the Box 1 x EVA 24V Barrier 1 x EVA 5m Boom (2pc) 1 x EVA.AF Fixed Tip Rest (Swinging Tip Rest also available) For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

BENINCA KEVA.7 | 24V 7m Complete Barrier Kit

Product Overview The BENINCA KEVA.7 24V 7m Complete Barrier Kit is designed for intensive duty road barriers, featuring a 24Vdc motor with an integrated control panel and external release. This barrier kit ensures efficient and reliable operation, suitable for various applications including parking lots, commercial properties, and residential areas. With a 2-year guarantee, the KEVA.7 ensures long-lasting performance and peace of mind. Key Features Right or Left Handed: The barrier can be easily re-handed to suit installation requirements. Top Access Control Panel: Allows easy and fast programming. Integrated Dual Height Photocells: Built into the barrier case for enhanced safety. 24Vdc Motor: Suitable for intensive duty with the option for battery backup system. Amperometric Sensing: Obstacle detection system for safety. Fast-Acting Manual Release: New design for quick manual operation. Optional Flashing Lights: Available for the boom arm and barrier case. Adjustable Mechanical Stops: Two adjustable stops for precise operation. Boom Arm Balancing System: Simple, quick, and reliable balancing of the boom arm. Specifications FeatureDescription Motor Supply 24Vdc Barrier Length 7 meters Control Panel Access Top Access Obstacle Detection Amperometric Sensing Photocells Integrated Dual Height Manual Release Fast-Acting Optional Flashing Lights Boom Arm and Barrier Case Mechanical Stops 2 Adjustable Battery Backup Ready What's in the Box 1 x KEVA.7 24V Barrier 1 x 7m Boom 1 x Fixed Tip Rest (Swinging Tip Rest also available) For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.