GENIUS AUTOMATION Rainbow 7 kit - barrier kit with beam up to 7m length

Rainbow 7 kit - barrier kit with beam up to 7m length RAINBOW is the ideal solution for high traffic areas or where the barrier operates continuously at certain times of day, car parks, garage entrances or industrial zones RAINBOW was designed with particular attention to security and versatility of use, along with the quality of the materials on the loadbearing structure The presence of a standard encoder allows the detection of an obstacle during movement Kits are available in basic or full edition   SPECIFICATIONS Operator Rainbow 724 C Power supply voltage (Vac) 230 Vac 50Hz Electric motor voltage (Vdc) 24 Max Power at thrust (W) 480 Motor rate power (W) 220 Max torque at 24Vdc (Nm) 370 Opening/closing nominal time (sec) 4 to 11 Max Beam (m) 7 Daily max cycles 500 Operator weight (Kg) 72 Protection class IP54   KIT INCLUDES Rainbow 7 Basic Kit Rainbow 7 Full Kit  G724 3M KIT / G724 4M KIT / G724 5M KIT   RAINBOW7KIT3 / RAINBOW7KIT4 / RAINBOW7KIT5   1x Rainbow 724C  1x Rainbow 724 foundation plate  1x Rainbow 524 beam 3M/4M/5M 1x Beam extension 3.3m (not required for 5m beam) 1x beam joint (not required for 5m beam)  1x or 2x Rainbow 724 spring (2 springs Required for 6 & 7m beam)  -  1x Orion photocell -  1x Receiver RQFZ plug-in 868MHz -  2x Kilo TX2 Transmitters NOTE: Images are just for reference, for correct products contained in kits please see table above  

GENIUS AUTOMATION Rainbow 5 kit - barrier kit with beam up to 5m length

Rainbow 5 kit - barrier kit with beam up to 5m length RAINBOW is the ideal solution for high traffic areas or where the barrier operates continuously at certain times of day, car parks, garage entrances or industrial zones RAINBOW was designed with particular attention to security and versatility of use, along with the quality of the materials on the loadbearing structure The presence of a standard encoder allows the detection of an obstacle during movement Kits are available in basic or full edition   SPECIFICATIONS Operator Rainbow 524 C Power supply voltage (Vac) 230 Vac 50Hz Electric motor voltage (Vdc) 24 Max Power at thrust (W) 280 Motor rate power (W) 160 Max torque at 24Vdc (Nm) 140 Opening/closing nominal time (sec) 4 to 8 Max Beam (m) 5 Daily max cycles 1000   Operator weight (Kg) 66 Protection class IP54   KIT INCLUDES Rainbow 5 Basic Kit Rainbow 5 Full Kit  G524 3M KIT / G524 4M KIT / G524 5M KIT   RAINBOW5KIT3 / RAINBOW5KIT4 / RAINBOW5KIT5   1x Rainbow 524C  1x Rainbow 524 foundation plate  1x Rainbow 524 beam 3M/4M/5M  1x or 2x Rainbow 524 6.5 spring (2 springs Required for 5m beam)  -  1x Orion photocell -  1x Receiver RQFZ plug-in 868MHz -  2x Kilo TX2 Transmitters NOTE: Images are just for reference, for correct products contained in kits please see table above

DEA PASS N - Electromechanical Barrier for Semi-Intensive Use up to 5m Length (24V)

Product Overview The PASS N electromechanical barrier is designed to safely manage traffic flow in parking areas and private or apartment contexts with passages up to 5 meters. It is ideal for semi-intensive use, ensuring reliable and efficient operation. Key Features Manages passages up to 5 meters Equipped with magnetic or digital encoder for precise and safe operation Soft start and stop function for smooth movement Easy and fast installation Robust construction with painted steel shell and metal gears Control via smartphone using the DEAuser app Optional remote monitoring and control with NET-COM device Product Description The PASS N electromechanical barrier is built to handle high-traffic environments with ease. Its robust construction and advanced features ensure reliable and efficient operation. The barrier can manage passages up to 5 meters, making it ideal for parking areas and apartment complexes. The encoder technology provides precise movement control, with features like soft start and stop, obstacle detection, and automatic reversal of the bar direction if needed. This ensures a smooth and safe operation, making it ideal for semi-intensive use. Installation is straightforward, requiring minimal setup time. The barrier's painted steel shell and metal gears guarantee long-term durability and resistance to mechanical wear. For enhanced control, the DEAuser app allows you to operate the barrier via smartphone, and the NET-COM device provides remote monitoring and control capabilities. Product Specifications Technical InfoSpecification Motor Power Supply 24V Maximum Power Absorption 105W Duty Cycle (cycles/hour) 290 / 140 / 240 Maximum Cycles in 24h 800 Operating Temperature -20°C to +50°C 90° Opening Time 2.2s / 6s / 2.8s Weight with Packing 41 kg Sound Pressure < 70 dBA Protection Level IPX4 Product Guide CodeProductPower SupplyBoom LengthUse IntensityIntegrated Control BoardEncoderOther Characteristics 644040 PASS24NET/N/V 24V 3m fast Semi-intensive use NET24N Yes Speed adjustment during normal cycle, slow down in opening and closing, motor control by encoder, obstacle detection, tamper-proof programming 644042 PASS24NET/N/VR 24V 4m fast Semi-intensive use NET24N Yes Speed adjustment during normal cycle, slow down in opening and closing, motor control by encoder, obstacle detection, tamper-proof programming 644041 PASS24NET/N/L 24V 4 and 5m slow Intensive use NET24N Yes Speed adjustment during normal cycle, slow down in opening and closing, motor control by encoder, obstacle detection, tamper-proof programming All models: Led lights, boom, boom holder, and foundation plate are not included. The barrier must be balanced correctly to ensure proper operation. For additional accessories, verify the quantity of additional KIT MOLLA needed (see chart in downloads). Use one NET24N control board with every barrier. Accessories Boom (PASS3, PASS4, and PASS5) Boom holder (OMPASS, OMPASS5, OMPASS60) Foundation plate (PASS/B) LED Lights for barrier (LED/B) LED Lights for beam (STRIP-LED) Black rubber profile (GSOFTP) Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA STOP N - Electromechanical Barrier for Intensive Use up to 8m Length (24V)

Product Overview The DEA STOP N electromechanical barrier is designed for managing high-intensity traffic flows and work cycles. Ideal for large car parks and industrial accesses, it can move bars up to 8 meters in length, ensuring smooth traffic flow and enhanced safety. Key Features Manages large passages with bars up to 8 meters Equipped with magnetic or digital encoder for precise and safe operation Easy and fast installation Robust construction with painted steel shell and metal gears Control via smartphone using the DEAuser app and optional NET-COM device Compatible with additional accessories for enhanced functionality Product Description The STOP N electromechanical barrier is capable of handling high-traffic environments with ease. Its robust construction and advanced features ensure reliable and efficient operation. The barrier can manage large passages with bars up to 8 meters, utilizing the BOOM LINK system to combine multiple bars. The encoder technology provides precise movement control, with features like soft start and stop, obstacle detection, and automatic reversal of the bar direction if needed. This ensures a smooth and safe operation, making it ideal for high-intensity use. Installation is straightforward, requiring minimal setup time. The barrier's painted steel shell and metal gears guarantee long-term durability and resistance to mechanical wear. For enhanced control, the DEAuser app allows you to operate the barrier via smartphone, and the NET-COM device provides remote monitoring and control capabilities. Product Specifications FeatureSpecification Boom Length 4 - 8 meters Motor Power Supply 24V Maximum Power Absorption 120W (24V) Duty Cycle (cycles/hour) 500 (24V) Maximum Cycles in 24h 1500 (24V) Operating Temperature -20°C to +50°C Motor Thermal Protection 150°C (230V) Opening Time at 90° 2.7 - 7.5 seconds (24V) Weight with Packing 79 - 81 kg Sound Pressure < 70 dBA Protection Level IPX4 Product Guide CodeProductPower SupplyBoom LengthUse IntensityIntegrated Control BoardEncoderOther Characteristics 645050 STOP24NET/N/V-F 24V 4 meters Intensive use NET24N Yes Electromechanical limit switches, 2 springs, motor control by encoder, obstacle detection 645051 STOP24NET/N/L-F 24V 6-8 meters Intensive use NET24N Yes Electromechanical limit switches, 2 springs + 1 additional spring, motor control by encoder, obstacle detection All models: Led lights, boom, boom holder, and foundation plate are not included. The barrier must be balanced correctly to ensure proper operation. For additional accessories, verify the quantity of additional KIT MOLLA needed (see chart in downloads). Use one NET24N control board with every barrier. Accessories Boom (BOOM/4 and BOOM/6) Boom holder (OMEGA) Foundation plate (STOP/B) LED Lights for barrier (LED/B) LED Lights for beam (STRIP-LED) Spring (KIT MOLLA) Black rubber profile (GSOFTP) Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA TRAFIK - Electromechanical Barrier for Intensive Use up to 6m Length (230V)

Product Overview The DEA TRAFIK electromechanical inverter barrier is designed for installation in large car parks, commercial areas, or industrial accesses with passages up to 6 meters wide. It efficiently manages high vehicle flow, withstanding a continuous work cycle of up to 15,000 maneuvers per day. Key Features 230V three-phase voltage for low energy consumption and intensive use Fast 90° opening in only 1.5 seconds Inverter technology for precise, fast, and smooth movement Magnetic encoder for obstacle detection and safe operation Easy maintenance with accessible internal mechanisms and electronics Durable construction with corrosion-resistant case Available in two colors: orange (RAL2000) and light grey (RAL9006) Burglar-proof system for enhanced security Optional NET-COM device for smartphone control Product Description The TRAFIK electromechanical barrier is engineered to handle high-traffic environments with ease. Its 230V three-phase voltage system allows for low energy consumption while maintaining a nearly continuous work cycle. The barrier features a fast 90° opening in just 1.5 seconds, ensuring smooth vehicle entry and exit. The inverter technology paired with a sinusoidal linkage provides precise and smooth barrier movement. The magnetic encoder detects obstacles, stopping or reversing the barrier to ensure safety. Maintenance is straightforward thanks to the barrier's two doors and removable cover, granting easy access to internal components. Constructed with robust materials, the TRAFIK barrier boasts a corrosion-resistant steel outer case treated with cataphoresis and polyester powder coating. The barrier is available in two colors, enhancing its suitability for various environments. The burglar-proof system ensures the barrier remains secure when closed. For added convenience, the NET-COM device allows users to control the barrier via smartphone. The TRAFIK barrier is compatible with a range of accessories, including booms, lights, and springs, ensuring a customizable and comprehensive barrier solution. Product Specifications FeatureSpecification Boom Length Up to 6 meters Power Line Supply 230V AC - 50 Hz Motor Power Supply 230V three-phase Control Unit DE@NET NET24NGR Encoder Magnetic Limit Switch Electro-mechanical Opening Time at 90° 1.5 seconds Operating Temperature -20°C to +55°C Protection Level IP54 Color Options Orange (RAL2000), Light Grey (RAL9006) Use Intensity Continuous use Operating Cycles per Day Up to 15,000 Product Guide CodeProductBoom LengthUse IntensityIntegrated Control BoardEncoderLimit SwitchOther Characteristics 646000 TRAFIK* 6 meters Continuous use NET24NGR Yes Yes Input power supply 230V, three-phase asynchronous 230V motor, inverter-controlled, obstacle detection by encoder, electro-mechanical limit switches included 646001 TRAFIK INOX** 6 meters Continuous use NET24NGR Yes Yes Input power supply 230V, three-phase asynchronous 230V motor, inverter-controlled, obstacle detection by encoder, electro-mechanical limit switches included, stainless steel case *Main case complete with two doors and top cover with cataphoresis treatment, painted in anthracite RAL 7016. **Main case complete with two doors and top cover in AISI 304 stainless steel with cataphoresis treatment, painted in anthracite RAL 7016. Accessories Boom (BOOM/4 and BOOM/6) Boom holder (OMEGA) Foundation plate (TRAFIK/B) LED Lights for barrier (LED/B) LED Lights for beam (STRIP-LED) Spring (MOLLA S and MOLLA XL) Black rubber profile (GSOFTP) Color kit - orange and light grey Note: Boom, boom holder cover, flashing light circuit, and foundation plate not included. Spring not included. For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

FADINI BARRI 88 230 Vac 4m automatic barrier for residential and collective applications

FADINI BARRI 88 230 Vac 4m automatic barrier for residential and collective applications ANTI-CRUSH SAFETY 230 Vac oil-hydraulic operator, beam slowdown in opening and closing. Ideal for residential and collective access control. QUICK AND SMOOTH MOVEMENTS Reinforced structure made of RAL 1018 zinc yellow powder coated steel, incorporated electronic control board. Anodized aluminium beam with an oval section design. TECHNICAL DATA Power Supply 230V AC - 50Hz Absorbed power 330 W Absorbed current 1,8 A Power yield (kW – HP) 0,24 - 0,33 Opening time (s) ~ 5 Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type 708L Weight without beam (kg) 58 Treatment and finishing Cataphoresis and polyester powder coating in RAL 1018 zinc yellow Frequency of use Intensive NOTE Single product includes a housing cabinet fitted with a door, two keys, B88 motor-pump and jack assembly, ELPRO 88 exp electronic control board, electric power supply and earth cables, aluminium beam 30x80x4.000 mm, flanged bracket to take and fasten the beam, zinc-coated fixing base plate with rag bolts and nuts. The housing is cataphoresis treated and polyester powder coated in RAL 1018 zinc yellow. Folding pedestal and fixed pedestal only for the codes as indicated in the chart.  

Fadini BAYT 980 Automatic Barrier with Variable Options

Fadini BAYT 980 Barrier Oil-hydraulic road barrier with beams from 3m up to 8m depending on speed (faster means smaller beam). OIL-HYDRAULIC SAFETY 230 Vac oil-hydraulic operator, motor-pump and piston integrated in the assembly. Ideal for those installations where heavy duty specifications are to meet: car parks, private and public driveways, residential, urban and industrial areas. Various speed options, slowdown on opening and closing. ROBUST Reinforced structure made of powder coated steel to ensure a greater resistance to weathering or AISI 304 brushed stainless steel. Anodized aluminium beams with oval section, available in various lengths and coming with an aluminium expanding joint; high strength against winds. VERSATILE Wide range of accessories: beam with a fence underneath, beam with incorporated LED lights highly visible in dark conditions (flashing option as traffic lights on request), folding device for roofed applications, swing-away arm fastening plate preventing breakage in case of vehicle collision. QUICK INSTALLATION The electronic control board is located in the upper part of the housing in a dedicated and separated box. “master/slave” option available on request for opposing barriers. HANDY A version of this model can be fully operated by hands (max. beam length 6,40 m without fence). Ideal for places where no electric power supply is available. SPECIFICATIONS Power Supply 230V AC - 50Hz Absorbed power 510 W Absorbed current 2.4 A Power output 0,37 kW (0,5 HP) Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type FADINI oil Oil reservoir volume 2.5 litres Colour Variable - choose in options (Stainless Steel or Orange) Frequency of use very intensive   PRODUCT INCLUDES AND ADDITIONAL INFORMATION AISI 304 STAINLESS STEEL RAL 2002 / 9006 SW3061 Housing cabinet with door Two keys Motor-pump-piston assembly COS 982 Electronic control board ELPRO 980 Voltage cut-off switch Power supply and ground cables Flanged fastening plate to hold the aluminium beam  Stainless steel anchoring base plate with rag bolts and nuts Zinc-coated anchoring base plate with rag bolts and nuts    Blue LED light incorporated into the housing  The barrier body, top cover and door are AISI 304 brushed stainless steel. The barrier body is cataphoresis treated and polyester powder coated in two colours, body in RAL 2002 orange red, while top cover and door are 9006 SW3061 textured grey.   Beam and accessories (folding and fixed pedestals, etc.) not included; consult the specific section in the catalogue.      PRODUCT CODE LIST RAL VERSION CODE (click to see) STAINLESS STEEL CODE (click to see) VERSION SPEED (s) PISTON PUMP BEAM LIMIT (m) access width [ ] FENCE REINFORCEMENT BEAM CABLES KIT COUNTERWEIGHTS (10 kg each) F/9801DXL F/9811DXL right-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9801SXL F/9811SXL left-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9802DXL F/9812DXL right-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9802SXL F/9812SXL left-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9803DXL F/9813DXL right-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9803SXL F/9813SXL left-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9804DXL F/9814DXL right-handed    14  ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9804SXL F/9814SXL left-handed    14 ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9805DXL F/9815DXL right-handed     19 ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L F/9805SXL F/9815SXL left-handed     19  ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L

FAAC B680L8MKIT | 24V Hydraulic Barrier for Large Beams Up to 8m

Product Overview The FAAC B680L8MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 8 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 8 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Two-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L8MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 8 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a two-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The two-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 8 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Two-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L8MKIT are available for precise installation and setup.

FAAC B680L7MKIT | 24V Hydraulic Barrier for Large Beams Up to 7m

Product Overview The FAAC B680L7MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 7 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 7 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Two-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L7MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 7 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a two-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The two-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 7 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Two-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L7MKIT are available for precise installation and setup.

FAAC B680L6MKIT | 24V Hydraulic Barrier for Large Beams Up to 6m

Product Overview The FAAC B680L6MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 6 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 6 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Two-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L6MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 6 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a two-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The two-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 6 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Two-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L6MKIT are available for precise installation and setup.

FAAC B680L5MKIT | 24V Hydraulic Barrier for Large Beams Up to 5m

Product Overview The FAAC B680L5MKIT is a comprehensive 24V hydraulic barrier kit designed for large beams up to 5 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for large beams up to 5 meters Beam diameter: 109mm x 85mm Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680L5MKIT is an advanced 24V hydraulic barrier system designed to control access with large beams up to 5 meters in length and 109mm x 85mm in diameter. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 5 meters Beam diameter: 109mm x 85mm Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680L5MKIT are available for precise installation and setup.

FAAC B680S5MKIT | 24V Hydraulic Barrier for Beams Up to 5m

Product Overview The FAAC B680S5MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 5 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 5 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S5MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 5 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 5 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S5MKIT are available for precise installation and setup.

FAAC B680S4MKIT | 24V Hydraulic Barrier for Beams Up to 4m

Product Overview The FAAC B680S4MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 4 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 4 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S4MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 4 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 4 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S4MKIT are available for precise installation and setup.

FAAC B680S3MKIT | 24V Hydraulic Barrier for Beams Up to 3m

Product Overview The FAAC B680S3MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 3 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 3 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S3MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 3 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 3 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S3MKIT are available for precise installation and setup.

FAAC B680S2MKIT | 24V Hydraulic Barrier for Beams Up to 2m

Product Overview The FAAC B680S2MKIT is a comprehensive 24V hydraulic barrier kit designed for beams up to 2 meters. This high-quality barrier system is ideal for a variety of settings, providing reliable and efficient operation. The kit includes everything necessary for installation, ensuring a smooth and hassle-free setup. Key Features 24V hydraulic barrier for beams up to 2 meters Includes B680H barrier body and E680 control unit Foundation plate for secure installation Small bracket and spring for added stability Small one-piece beam with reflective strips Barrier case available in Red, Blue, White, Grey (S/S available at additional cost) Removable case for easy maintenance Integrated encoder for precise control Integrated control board Modular beams for flexibility Adjustable speed Single version for left and right handed barriers Body and beam LED lights for visibility Product Description The FAAC B680S2MKIT is an advanced 24V hydraulic barrier system designed to control access with beams up to 2 meters in length. This barrier kit includes a B680H barrier body, E680 control unit, foundation plate, small bracket and spring, and a small one-piece beam equipped with reflective strips for enhanced visibility. The barrier case can be customized in various colors including Red, Blue, White, and Grey, with a stainless steel option available at an additional cost. Reliable and Efficient Operation The B680 barrier features a removable case for easy maintenance, integrated encoder for precise barrier control, and an integrated control board. The modular beams offer flexibility in installation, while the adjustable speed allows for customized operation. The single version design makes it suitable for both left and right handed barriers, providing versatile installation options. Enhanced Visibility and Safety For improved visibility and safety, the B680 barrier is equipped with body and beam LED lights. These lights ensure that the barrier is easily seen, reducing the risk of accidents and enhancing overall security. Easy Installation The kit includes all necessary components for a straightforward installation process. The foundation plate ensures a secure base, while the small bracket and spring add stability to the barrier system. The small one-piece beam with reflective strips is designed for quick and easy setup, making this barrier kit an ideal choice for efficient and reliable access control. Specifications 24V hydraulic barrier system Beam length: Up to 2 meters Integrated encoder and control board Adjustable speed Modular beams Suitable for left and right handed barriers Body and beam LED lights Customizable barrier case color: Red, Blue, White, Grey (S/S available at additional cost) Kit Includes B680H Barrier body E680 Control unit Foundation plate Small bracket and spring Small one-piece beam Reflective strips Barrier case (please state color on order) RAL Colour Availability The barrier case is available in Red, Blue, White, Grey, with a stainless steel option available at an additional cost of £600 + VAT. Drawings and Dimensions Detailed drawings and dimensions of the FAAC B680S2MKIT are available for precise installation and setup.