WM003C1G to Control Automation System
Niceway module to control 3 step-by-step and 1 open-stop-close automation system.
12-Teeth Pinion RUA12 Module 6 - To be coupled with RACK ROA81
12 - teeth pinion, module 6, to be coupled with Rack ROA81.
1x 18ah 12 vdc batteries DA.BT18
2 Year guarantee
22x22x1000mm Steel toothed drive rack RI.M4Z
2 Year guarantee
230v Induction Loop Controller LD200 and base dual channel boxed loop detector
2 Year guarantee
230v IP54 4 channel radio module RBE42
3 Year guarantee
24V Battery Box Solemyo PSY24 with Control Circuit and Carry Handles
24V battery box with control circuit and carry handle.
24v DC magnetic sensors bi channel magnetic induction loop sensor SMA2
CAME SMA2 24 V AC-DC two Channel Magnetic Sensor for passage access control.
24v DC magnetic sensors one channel magnetic induction loop sensor SMA
3 Year guarantee
24v dual channel card loop detector LD213
2 Year guarantee
24v Induction Loop Controller LD202 and base dual channel boxed loop detector
2 Year guarantee
24v single channel card loop detector LD113
2 Year guarantee
24 Vdc Buffer Battery - Accessory for M3BAR, M5BAR, M7BAR.
28x40x1000mm Nylon toothed drive rack RI.M4P Grey
28x40x1000mm Nylon toothed drive rack RI.M4P Grey
2x 12v - 1.2 Ah batteries BAT2PK
CAME BAT2PK Set of two 12V - 1.2 Ah batteries. What comes in the box QuantityItem 1 CAME BAT2PK Batteries
2x 12v- 7 Ah batteries BAT2PK-7AH
CAME BAT2PK-7AH Set of two 12V - 7 Ah batteries. What comes in the box QuantityItem 1 CAME BAT2PK-7AH Batteries
3 phase control panel ZT6 230 - 400v
CAME ZT6 Control Panel Featuring Self-Diagnosis of Safety Devices.
30x12x1000mm Steel toothed drive rack RI.M4F
2 Year guarantee
30x30x2000mm MOD 6 toothed drive rack RI.M6Z
2 Year guarantee
Chain 360 degree conversion kit
3x 12v- 1.2 Ah batteries BAT3PK
CAME BAT3PK Set of three 12V - 1.2 Ah batteries. What comes in the box QuantityItem 1 CAME BAT3PK Batteries
CAME BPT S0004N 4 Channel control panel CAME 12-24V AC-DC Possibility of radio commanding the 1st channel Four-channel card for S5000 S6000 and S7000 keypads.
450N Unlocking device by cable for LIVI/N (4,5m) - use with BLINDOS
450N Unlocking device by cable for LIVI/N (4,5m) - use with BLINDOS Unlocking device by cable for LIVI/N (4,5m). To be used with BLINDOS. More information in downloads.
2 Year guarantee
560 Articulated Arms for LIVI 502 | Aluminum & Galvanized Steel Options
Product Overview The 560 Articulated Arms for LIVI 502 are designed to enhance the functionality and versatility of the LIVI 502 automation system. These arms are available in a variety of materials and configurations to suit different installation needs. Whether you require aluminum or galvanized steel, sliding or painted options, the 560 series offers a robust solution for your gate automation requirements. Key Features Compatible with LIVI 502 automation system Available in aluminum and galvanized steel Options for both left and right side installations Durable construction for long-lasting performance Various configurations to meet specific needs Product Description The 560 Articulated Arms for LIVI 502 are specifically engineered to provide reliable and efficient operation for swing gates. These arms are essential components for the LIVI 502 automation system, offering flexibility and durability to accommodate various gate setups. The range includes different types of arms to ensure that you can find the perfect match for your specific installation requirements. Product Guide CodeProductDescription 629130 560A Aluminum articulated arm 629110 560BD Galvanized steel rail sliding arm, right side (L. 800 mm) 629120 560BS Galvanized steel rail sliding arm, left side (L. 800 mm) 629140 560BV Painted galvanized steel articulated arm Detailed Descriptions 560A - Aluminum Articulated Arm: Lightweight and durable, this arm is designed for easy installation and reliable performance. 560BD - Galvanized Steel Rail Sliding Arm (Right Side): This right-side sliding arm, made of galvanized steel, offers enhanced corrosion resistance and strength, measuring 800 mm in length. 560BS - Galvanized Steel Rail Sliding Arm (Left Side): Similar to the 560BD, this left-side sliding arm is also 800 mm long and provides the same durability and corrosion resistance. 560BV - Painted Galvanized Steel Articulated Arm: This painted version of the galvanized steel arm combines aesthetic appeal with robust performance, ensuring long-lasting use. What's in the Box 560 Articulated Arm (specific type based on order) Mounting hardware Installation instructions For more information or to explore our full range of products, please visit our website or contact our customer service team.
560M - external unlocking device by cable (4,5m) to be used with BLINDOS
560M - external unlocking device by cable (4,5m) to be used with BLINDOS Pack version 560M + BLINDOS is available here (click).
560P - Vertical fixing plate (fastening of operator perpendicularly to the gate)
560P - Vertical fixing plate (fastening of operator perpendicularly to the gate) This product is to be used with LIVI 502.
580L/580V | Mounting Plate for ANGOLO (Horizontal or Vertical)
Product Overview The 580L/580V mounting plates are designed for the ANGOLO operator, providing versatile installation options to suit your specific needs. Choose between the 580L horizontal mounting plate for fastening the operator parallel to the gate, or the 580V vertical mounting plate for perpendicular installation. These mounting plates ensure secure and efficient installation of your ANGOLO operator. Product Guide CodeProductDescription 381070 580L Horizontal mounting plate (fastening of operator parallel to the gate) 381060 580V Vertical mounting plate (fastening of operator perpendicularly to the gate) Key Features 580L Horizontal Mounting Plate: Ideal for securing the operator parallel to the gate for a streamlined installation. 580V Vertical Mounting Plate: Perfect for fastening the operator perpendicularly to the gate, providing flexibility in installation. Durable Construction: Both mounting plates are built to ensure secure and long-lasting installation of your ANGOLO operator. For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.
580M - External unlocking device by cable (4,5m) to be used with BLINDOS
580M - external unlocking device by cable (4,5m) to be used with BLINDOS Pack version 580M + BLINDOS is available here (click).
Adjustable mechanical stop DU.350ST for DU.350 motor
2 Year guarantee
Aluminium Post ERA PPH1 - Housing for 1 Photocell / Medium and Large
Outdoor aluminium post with protected housing for 1 photocell - Medium and Large 500mm h.
Anchorage Base XBA16 with Clamps - For MBAR
Anchorage base with clamps - Accessory for M3BAR, M5BAR, M7BAR.
Angular Extension for Measurements NSEA from 1.25 to 2.50m - Impact Force Measurement
Angular extension for measurements from 1.25 to 2.50m, applicable on NSEL.
Antenna 433.92Mhz cable
CAME TA433N Tuned antenna for 433mhz. What comes in the box QuantityItem 1 CAME TA433N Antenna
CAME TA862N Tuned antenna for 868mhz. What comes in the box QuantityItem 1 CAME TA862N Antenna
Antenna with charcoal grey support DD-1TA868
CAME DD-1TA868 Antenna with Anthracite Grey Support. What comes in the box QuantityItem 1 CAME DD-1TA868 Antenna
ARB Lux Non-weld bracket kit for Lux
ARB Lux Non-weld bracket kit for Lux
ARB ORO Non-weld bracket kit for Oro
ARB ORO Non-weld bracket kit for Oro
Articulated boom arm joint kit LADY.SN
2 Year guarantee
Articulated transmission arm STYLO-BS
CAME STYLO-BS STYLO Articulated Transmission Arm. What comes in the box QuantityItem 1 CAME STYLO-BS Transmission Arm
ASO Indus Kit 71-242 Set S Inductive Transmission System The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. Features Inductive transmission kit CAT 3 transmission system for sliding gates Easy and fast installation 24V AC/DC 2 x Stationery Edge Inputs 2 x Moving Edge Inputs
BAT (629290) Battery Back up for 24v DEA kits
Art. BAT Item BATCod. 629290 Rechargeable batteries kit for 24V operators, 12V - 1,3Ah, complete with wiring cables.
BAT/LIVI 3-6-9/24 Rechargeable batteries kit for LIVI/N 24V operators
BAT/LIVI 3-6-9/24 Rechargeable batteries kit for LIVI/N 24V operators Rechargeable batteries kit for LIVI/N 24V operators, 12V - 1,2Ah, complete with wiring cables and fixing plate. More information in downloads.
CAME LB180 Battery connection card. Max 2 x 12V - 1.2 Ah emergency batteries. What comes in the box QuantityItem 1 CAME LB180 Connection Card
CAME LB90 Battery connection card. Max 2 x 12V - 1.2 Ah emergency batteries. What comes in the box QuantityItem 1 CAME LB90 Connection Card
BFT Traffic Light LED 24v
Bi channel card 806SL-0370 3 Year guarantee
Bi-Di-Awning | Exterior Bidirectional Interface for Tubular Motor
Product Overview The Bi-Di-Awning is an exterior bidirectional interface designed for tubular motors of outdoor awnings. It enables seamless integration of mechanical tubular motors into smart home systems, offering individual, group, or scenario control. The interface provides feedback on automation status, helps manage electrical loads, and reduces energy waste. The Bi-Di-Awning is compatible with voice commands via Amazon Alexa, Google Home, and Siri Shortcuts, and can be managed remotely through the Yubii or MyNice apps. Key Features Exterior bidirectional interface for tubular motors Control connected motors individually, in groups, or in scenarios Receive feedback on automation status Manage electrical loads to reduce energy waste Compatible with Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment Protect indoor environments from the heat of the sun Fast programming of limit switches from the transmitter Set two intermediate opening positions Program partial opening based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors Control Venetian blinds, rolling shutters, and awnings without a gateway Acts as a radio signal repeater to extend coverage Product Description Bi-Di-Awning Exterior Bidirectional Interface for Tubular Motors The Bi-Di-Awning interface integrates mechanical tubular motors of outdoor awnings into your smart home system, allowing for comprehensive control and management. Whether you need to control the motors individually, in groups, or as part of a scenario, the Bi-Di-Awning provides the flexibility and functionality you need. Smart Home Compatibility Enjoy the convenience of controlling your awnings through voice commands with Amazon Alexa, Google Home, and Siri Shortcuts. Manage your devices remotely using the Yubii or MyNice apps on your smartphone, smartwatch, or car infotainment system. Efficient Energy Management The Bi-Di-Awning helps reduce energy waste by controlling consumption and managing electrical loads effectively. Protect your indoor environment from the heat of the sun, making your climate more comfortable and cutting back on air conditioning use. Advanced Programming and Compatibility The interface allows for fast programming of limit switches directly from the transmitter by performing two complete manoeuvres, ensuring continuous automatic calibration. You can set two intermediate opening positions and program partial openings based on sun sensor settings. The Bi-Di-Awning is compatible with both unidirectional and bidirectional remote controls and climate sensors, making it a versatile solution for controlling Venetian blinds, rolling shutters, and awnings without the need for a gateway. Enhanced Signal Coverage Each bidirectional product acts as a radio signal repeater, extending the signal coverage and ensuring reliable communication across your system.
BILL30.CO single stem cover for BILL30M operator
2 Year guarantee
BlueForce Smart | Force Measurement Device for Automatic Gates and Doors
Product Overview The BlueForce Smart is an extraordinary force measurement device designed for CE certification of power-operated gates and doors. Compliant with standards EN12453 (former EN12445), EN16005, EN60335-2-95, ASR A1.7, and DHF UK Norms, this device represents an evolution of the acclaimed BlueForce and SpeedForce models. With revised design, packaging, and technology, the BlueForce Smart integrates the latest wireless functions, enabling interfacing with PCs and smartphones, leveraging advanced graphic potential and Internet connectivity. Key Features Compliant with EN12453, EN16005, EN60335-2-95, ASR A1.7, and DHF UK Norms Wireless functionality with Bluetooth/NFC Smart functions + App Interfaces with PC, tablet, or smartphone via USB or Bluetooth Integrated magnetic encoder with bus "2easy" (nonpolarized two-wire connection) Integrated positive stops, no need to install mechanical stops on the ground Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices 2-Year Warranty Product Description The BlueForce Smart is the latest force measurement device designed for the CE certification of automatic gates, barriers, and doors. It ensures compliance with EN12453 and DHF standards regarding force and stopping. This device allows you to take measurements at the gate, barrier, or door and access the data on a PC, tablet, or smartphone via USB or Bluetooth. Advanced Technology The BlueForce Smart is an evolution of the BlueForce and SpeedForce testers, featuring advanced wireless functions for seamless interfacing with modern devices. It includes powerful software that is user-friendly and compatible with Microsoft Windows, enabling easy data analysis and report generation. Comprehensive Kit The kit includes the BlueForce Smart instrument, Bluetooth/NFC Smart functions + App, a carry case with a pre-formed interior, a straight extension, a USB cable for PC connection, a hex wrench for handle disassembly, and downloadable instructions, software, and certificate of calibration from the download section. Software Features Guide to taking force tests, with application of the integrated legislation Downloading tests from the gauge memory and the Pocket PC, including via Bluetooth Viewing the impact curve and calculating parameters and averages Advanced graphics functions (zoom, limit mask, grid) Automatic evaluation of the measurement result Graphic representation of the measuring points for all types of doors/gates Customer and door/gate database management, with export/import functions Automatic test report generation for inclusion in the technical file Print option for reports and graphs in PDF Periodic software updates available online Technical Specifications Dimensions and Weight: 280x80x50mm - approx. 1.6 Kg Power supply: 9V alkaline battery Memory capacity: 80 tests Force acquisition interval: 6 sec, sampling at 1kHz Force measurement range: 0-2000N (mechanical stop at approx. 2100N) Force measurement resolution: 1N Dynamic time measurement resolution: 0.01s Maximum force measurement error margin: Range from 0 to 400N: +/-1% F.S Range from 400 to 1000N: +/-2% F.S Range from 1000 to 2000N: +/-4% F.S NFC interface: standard ISO/IEC 14443 and NFC Forum Type 4 (enabled as an option via password) BLE interface: Bluetooth version 4.1 (enabled as an option via password) USB interface: v.2.0 specification compliant CE-EMC conformity at TUV Rheinland on sample BlueForce instrument serial no.: 00981 Compliant with standards EN12445, EN12453, EN16005, EN60335-2-95 2-Year Warranty The BlueForce Smart comes with a 2-year warranty, ensuring reliability and peace of mind.
BOB.50SR, Multi position bracket (BOB50 only)
BOB.50SR, Multi position bracket (BOB50 only)
Boxed 2 channel universal receiver ONE.2WB
2 Year guarantee
BPT CAME-AF43SR | Plug-In Radio Card | 433.92MHz
Product Overview The BPT CAME-AF43SR is a plug-in radio card designed to enhance the functionality of your gate automation system. Operating at a frequency of 433.92MHz, this radio card provides reliable and secure communication for controlling your gate. The AF43SR is easy to install, making it a convenient addition to your gate automation setup. Key Features Plug-in radio card for gate automation systems Operates at 433.92MHz frequency Easy installation for seamless integration Provides secure and reliable communication Product Description The BPT CAME-AF43SR plug-in radio card is an essential accessory for enhancing the performance and control of your gate automation system. Designed to operate at a frequency of 433.92MHz, this radio card ensures reliable and secure communication between your gate's control panel and remote devices. Installation of the AF43SR is straightforward and hassle-free, thanks to its plug-in design. Simply insert the card into the appropriate slot in your gate's control panel to enable enhanced functionality and improved control. The secure communication provided by this radio card ensures that your gate operates smoothly and efficiently, responding accurately to remote commands. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-AF43SR Type: Plug-In Radio Card Frequency: 433.92MHz Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.
BPT CAME-G04601 | Support Bracket for Kiaro Series Flashing Lights
Product Overview The BPT CAME-G04601 is a robust support bracket designed for securely mounting Kiaro series flashing lights to cabinets. This adapter ensures a stable and reliable installation, enhancing the functionality and visibility of your gate automation system. The BPT CAME-G04601 bracket is an essential accessory for integrating flashing lights into your gate setup. Key Features Support bracket for Kiaro series flashing lights Ensures secure and stable installation to cabinets Durable construction for long-lasting performance Compatible with KIAROS support Product Description The BPT CAME-G04601 support bracket is specifically designed to facilitate the installation of Kiaro series flashing lights onto cabinets. This sturdy bracket ensures that the flashing lights are securely mounted, providing enhanced visibility and safety for your gate automation system. Made from high-quality materials, the BPT CAME-G04601 bracket is built to withstand regular use and various environmental conditions. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. This ensures that the bracket is installed correctly and securely, minimizing the risk of accidents or malfunctions. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-G04601 Type: Support Bracket Designed For: Kiaro Series Flashing Lights Compatibility: Matches KIAROS support Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.
BPT CAME-TAG-100 | Pack of 100 Transponder Bulbs
Product Overview The BPT CAME-TAG-100 transponder bulbs are high-quality components designed for use in gate automation systems. Available in a convenient pack of 100, these transponder bulbs ensure reliable performance and are ideal for maintaining and enhancing your access control systems. These bulbs are essential for the proper functioning of your gate automation, providing accurate and secure transponder signals. Key Features High-quality transponder bulbs for gate automation systems Available in a pack of 100 for convenience Ensures reliable and accurate performance Essential for maintaining access control systems Product Description The BPT CAME-TAG-100 transponder bulbs are crucial for ensuring the efficient operation of your gate automation systems. Each bulb is designed to provide precise and secure transponder signals, making them an indispensable component for access control. Whether you are upgrading your existing system or performing maintenance, these transponder bulbs are a reliable choice. Available in a pack of 100, the TAG-100 transponder bulbs offer ample supply for extensive use or for stocking up to ensure you have replacements readily available when needed. These bulbs are compatible with a range of gate automation systems, providing flexibility and ease of use. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-TAG-100 Type: Transponder Bulbs Quantity: Pack of 100 Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.
Buffer Battery - Walky Kit Accessory.
Buried guide for protecting the chain 2m CAR4
Buried guide for protecting the chain 2m
CAME 806SL-0300 | Stand-Alone Proximity Reader for Up to 250 Users
Product Overview The CAME 806SL-0300 is a stand-alone proximity reader designed to manage access for up to 250 users. This versatile device supports proximity cards, key fobs, and tags, making it an ideal solution for secure access control. The TSP01 reader can operate independently without connection to a PC and offers both monostable and bistable relay output options, ensuring flexible control of access points. Key Features Stand-alone proximity reader for up to 250 users Supports proximity cards, key fobs, and tags Monostable and bistable relay output options Card programming with dip switch configuration LED status indicator for easy operation IP54 rated for protection against dust and water Product Description The CAME 806SL-0300 proximity reader (TSP01) is a robust and reliable access control solution, capable of handling up to 250 users. Designed for stand-alone operation, this reader does not require a connection to a PC, offering ease of installation and use. It is compatible with proximity cards (TST01), key fobs, and tags (432SA), providing versatile options for user access. With the ability to operate on 12/24V AC/DC power, the TSP01 is suitable for a wide range of applications. The reader features an LED status indicator to provide clear feedback during operation and card programming. Users can configure the relay output to be either monostable or bistable, depending on their specific access control needs. For added security and durability, the CAME 806SL-0300 is IP54 rated, ensuring protection against dust and water. Its compact dimensions (70x70x70mm) make it easy to install in various environments. Note that while the reader supports relay outputs, it cannot control 230V AC devices directly through the relay contacts. The proximity reader can also be connected to CAME's RMB84 Controller for enhanced functionality and integration within a broader access control system. Technical Specifications Product Code: CAME-806SL-0300 Power Supply: 12/24V AC/DC Maximum Users: 250 Relay Output: Maximum 5A Operating Temperature: -20°C to 70°C Max. Reading Distance: 5 cm IP Rating: IP54 Dimensions: 70x70x70mm Installation and Safety Please ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.
CAME RLB - Battery backup (excl. batteries)
Battery Backup Card (requires 12v - 1.2AH Batteries not Included) Motor Range AXL Axi BXL BXV FTL FTX Fast Category Battery Backups
Product Overview The CAME ZLX24SA Control Panel is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS
2 Year guarantee
Card for connecting 3c 12 - 1.2Ah emergency batteries LB38
3 Year guarantee
Card for connecting two 12v - 1.2Ah batteries
3 Year guarantee
Casing with emergency card LB18
3 Year guarantee
Chain driven transmission lever FL-180
3 Year guarantee
Chain transmission device B4337
CAME B4337 Device for Chain Transmission.
Chain transmission system B4353
3 Year guarantee
COL 515 Anti-falling stainless steel cable with 2 holes for swing doors
COL 515 Anti-falling stainless steel cable with 2 holes for swing doors This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK DEA OLI/N DEA GEKO DEA ANGOLO DEA LIVI 502
Combined opening function management card RSE
CAME RSE Card for Management of Coupled Opening. What comes in the box QuantityItem 1 CAME RSE Control Panel
2 Year guarantee
Control Interface TCE for Sensitive Edge
Control interface for a sensitive edge.
CAME A4366 Customized key release and EURO-DIN cylinder for FROG A motors. What comes in the box QuantityItem 1 CAME A4366 Release Key
Dictator DIREKT 200 | Advanced Gate/Door Closer for Outdoor Safety
Product Overview The DICTATOR DIREKT 200 gate closer provides a secure and reliable solution for the automated closing of gates in outdoor settings, offering enhanced safety features compared to traditional models. Product Description The DIREKT 200 is specifically engineered for environments where safety and reliability are critical. It gently closes gates, making it ideal for locations such as kindergartens, schools, and industrial facilities. This model prevents gates from slamming and reduces the risk of injuries, such as pinched fingers or collisions with individuals passing through. Key Features Adjustable closing speed to match safety needs. Ability to lock in the open position temporarily, eliminating the need for additional devices. Installation simplicity akin to standard closing springs but with advanced control features. Reduces the risk of accidents associated with gate closures. What's in the Box Includes the Dictator DIREKT 200 gate closer unit, complete installation kit, and a detailed instruction manual for easy setup. Specifications Type Gate/Door closer Application Outdoor, particularly in educational and industrial environments Features Adjustable speed, hold open capability Installation Easy, with no additional tools required for hold open feature
Dictator RTS Hydraulic Hinge Closer | Concealed Door Closer for Gates
Product Overview The DICTATOR RTS Hydraulic Hinge Closer is expertly designed for seamless integration into doors, making it virtually invisible when the door is closed. Ideal for external gates without upper door frames. Product Description The RTS tube door closer is integrated directly into the door, only visible when the door is open. This design is particularly suited for external gates that face exposure to the elements and potential vandalism, providing a reliable and discreet closing mechanism. Key Features Integrated design, concealed within the door for a clean look. Suitable for outdoor gates in gardens, industrial plants, and more. Protection against weather conditions and vandalism due to concealed fitting. What's in the Box The package includes one DICTATOR RTS Hydraulic Hinge Closer, installation accessories, and an installation guide. Specifications Type Hydraulic hinge closer Application Exterior gates without upper frames Visibility Only visible when door is open
Digiway Plus and Safety Kit EN16005-KIT-U for Single Door
Digiway Plus and Safety Kit for Single Door. Kit compliant with EN16005. Includes all sensors, signage and finger protection.
Digiway Plus and Safety Kit EN16005-KIT-UD for Double Door
Digiway Plus and Safety Kit for Double Door. Kit compliant with EN16005. Includes all sensors, signage and finger protection.
Digiway SR and Safety Kit EN16005-KIT-U-SR for Single Door
Digiway SR and Safety Kit for Single Door. Kit compliant with EN16005. Includes all sensors, signage and finger protection.
Digiway SR and Safety Kit EN16005-KIT-UD-SR for Double Door
Digiway SR and Safety Kit for Double Door.
Dome shaped flashing light G02801
3 Year guarantee
Door Safety Sensor DWSSS-5M1 | Monitored
Product Overview The Door Safety Sensor DWSSS-5M1 is a robust and reliable sensor designed to ensure the safety of users during the operation of automatic doors. Part of CDVI's range of sturdy sensors, the DWSSS-5M1 provides effective monitoring and protection, activating Digiway door automation systems in full compliance with the EN16005 standard. This infrared door sensor is essential for maintaining safety and compliance in environments where automatic doors are used. Key Features Monitored door safety sensor Infrared detection Ensures user safety during door operation Activates Digiway door automation systems Full compliance with EN16005 standard Product Description The DWSSS-5M1 Door Safety Sensor is an infrared sensor designed to ensure the safety of users when automatic doors are in operation. This monitored sensor is part of CDVI's range of high-quality safety devices that provide automatic door opening and user protection. It activates Digiway door automation systems, ensuring smooth and safe door operation in compliance with the EN16005 standard. Designed for use in various environments, the DWSSS-5M1 is ideal for public buildings, hospitals, and other locations where user safety is paramount. Its robust construction and reliable performance make it an essential component for any automatic door system. Technical Specifications SpecificationDetails Type Infrared door safety sensor Monitoring Yes Compliance EN16005 Additional Information The DWSSS-5M1 Door Safety Sensor ensures user protection by activating Digiway door automation systems. Its infrared technology provides reliable detection, ensuring that automatic doors operate safely and in compliance with the EN16005 standard. This sensor is a crucial addition to any facility where automatic doors are used, enhancing safety and operational efficiency. Included in the Box 1 x Door Safety Sensor DWSSS-5M1 Installation manual
E80/TX52R/2 - Transmitter 2 Channel 433.92 MHz
Product Overview The E80/TX52R/2 is a 2-channel fixed code transmitter operating at 433.92 MHz. Designed for reliable gate automation, this transmitter provides up to 65536 combinations and a maximum range of 150m in open field conditions. Key Features 2-channel transmitter Operates at 433.92 MHz Fixed code modulation Radio for copy function Maximum range of 150m in open field Compact and lightweight design Product Description The E80/TX52R/2 transmitter is engineered to provide robust and secure gate automation control. Operating on a 433.92 MHz frequency with AM/ASK modulation, this transmitter supports up to 65536 fixed code combinations, ensuring secure and reliable access control. Its compact design and radio for copy function make it an ideal choice for residential and commercial applications. Specifications SpecificationDetails Standard power 3V DC Absorption 12mA Operating temperature -10 to +55°C Number of channels 2 Codification Fixed code Modulation AM/ASK Carried frequency 433.92 MHz Number of combinations 65536 Radio for copy Yes Maximum distance in open field 150m Battery Mod "CR2032" 3V Maximum dimension product (L x W x H) 38 x 68 x 11 mm Product weight packed 0.03 kg Applications The E80/TX52R/2 is ideal for controlling gate automation systems in both residential and commercial environments. Its fixed code modulation and multiple channels ensure secure and versatile access management.
E80/TX54R/2 - Transmitter 4 Channel 433.92 MHz
Product Overview The E80/TX54R/2 is a 4-channel fixed code transmitter operating at 433.92 MHz. Designed for seamless gate automation, this transmitter provides reliable performance with up to 65536 combinations and a maximum range of 150m in open field conditions. Key Features 4-channel transmitter Operates at 433.92 MHz Fixed code modulation Radio for copy function Maximum range of 150m in open field Compact and lightweight design Product Description The E80/TX54R/2 transmitter is engineered to provide robust and secure gate automation control. Operating on a 433.92 MHz frequency with AM/ASK modulation, this transmitter supports up to 65536 fixed code combinations, ensuring secure and reliable access control. Its compact design and radio for copy function make it an ideal choice for residential and commercial applications. Specifications SpecificationDetails Standard power 3V DC Absorption 12mA Operating temperature -10 to +55°C Number of channels 4 Codification Fixed code Modulation AM/ASK Carried frequency 433.92 MHz Number of combinations 65536 Radio for copy Yes Maximum distance in open field 150m Battery Mod "CR2032" 3V Maximum dimension product (L x W x H) 38 x 68 x 11 mm Product weight packed 0.03 kg Applications The E80/TX54R/2 is ideal for controlling gate automation systems in both residential and commercial environments. Its fixed code modulation and multiple channels ensure secure and versatile access management.
EDGE1/Box - 36V Control Unit for 2 Brushless Motors
Product Overview The EDGE1/Box is a sophisticated 36V digital control unit specifically designed for managing two brushless motors. Encased in a durable plastic box, this unit provides robust control and power management for automated gate systems, ensuring reliability and efficiency in both residential and commercial settings. Key Features Digital control for two brushless motors Operates at 36V with a 230V AC power supply Comes in a protective plastic box Supports a wide operating temperature range Multiple accessory outputs and support for an optional battery Product Description The EDGE1/Box control unit is engineered to handle the complexities of modern gate automation systems. With the ability to manage two brushless motors, this unit provides precise control and power distribution, making it an essential component for swing and sliding gate operations. The robust plastic enclosure ensures durability and protection against environmental factors. Specifications SpecificationDetails Power line supply 230V AC - 50 Hz Operating temperature -10 to +55°C Protection level IP54 Number of motors activated 2 Brushless Motors Max power per motor 250W Max courtesy light charge 100W (230V AC) / 40W (24V AC/DC) Max power gate open light 3W (24V DC) Max voltage accessories output 20W (24V DC) Electrical-lock max power 15W (12V DC) Flashlight voltage 24V DC Max flashing light charge 25W Battery Optional Dimensions (L x W x H) 330 x 230 x 115 mm Product weight packed 5.7 kg Number of items per pallet 50 Applications The EDGE1/Box is ideal for controlling swing and sliding gate systems in both residential and commercial environments. Its advanced features and durable design make it a reliable choice for ensuring the smooth operation of automated gates.
EGO Columns EG50, EG100 | Photocells and Selectors | LED Lights
Product Overview The EGO Columns for photocells and selectors are designed to provide reliable and efficient lighting solutions for large areas. Made entirely of aluminum and available in heights of 500 mm and 1000 mm, these columns feature replaceable LED lights to ensure long-lasting performance. The integrated LED lights enhance visibility and security, making them ideal for various applications. Key Features LED lights to illuminate large areas Constructed entirely of aluminum Available heights: 500 mm, 1000 mm Replaceable LED lights Product Description Specifications SpecificationDetails Voltage 24-35 Vdc Color Rendering Index (CRI) >90 Color Temperature 3000K Luminous Flux 450lm - 900lm Protection Degree IP54 Models CodeDescription EG50 Support post h. 50 cm EG50L Support post h. 50 cm with integrated LED light (5W LED) EG100 Support post h. 100 cm EG100L Support post h. 100 cm with integrated LED light (10W LED) EG100A Support post h. 100 cm with accessory housing EG100LA Support post h. 100 cm with integrated LED light (10W LED) and accessory housing Additional Components CTLIGHT2: Voltage regulator for LED lights 24 Vdc, max 30W (mandatory for all control units except BOXLED control units) Dimensions Height: 500 mm or 1000 mm Usage Limits The performance values can be affected by environmental conditions and the installation setup.
Electrical Connection Kit DBM10 for Safety Sensitive Edges - Gates up to 10m
Electrical connection kit for safety-sensitive edges on moveable leafs for gates up to 10m.
Electrical Connection Kit for Safety Sensitive Edges DBM5 - Gates up to 5m
Complete electrical connection kit for safety-sensitive edges on moveable leafs - gates up to 5m.
BPT CAME-G02805 | Battery Support for G8000 Please make sure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product (you can find the link above). Furthermore, ensure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing a serious injury. Features: Battery Support Technical Specifications: Designed for G8000
3 Year guarantee
ERA Neutral Key CHEU for EKSEU and EKSIEU
Neutral Key for EKSEU & EKSIEU.
ERA Neutral Key CHS for EKS & EKSI
Neutral key for EKS & EKSI.
Expansion Joint XBA9 - For M7BAR
Expansion Joint for M7BAR - bars accessory
F/7872L Emergency Manual Release Kit
FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops
Flat 4-wire cable for connection of devices on Bus T4 network, length 100mm.
FloR System Receiver SMXI with SM Plug - In 433.92MHz
Universal pre-wired receiver, 2 channels with memory containing 256 codes - FLO coding.
3 Year guarantee
Foundation plate BULL.PI for BULL 1024/ 15M motor
2 Year guarantee
FU102 Hot Dipped Galvanised Casement with Stainless Steel
FU102 Hot galvanized foundation box and inox lid.
Galvanised rack in rolled steel 30x30mm CGZ6 For Welding
CAME CGZ6 1m toothed drive rack. Module 6. Galvanized in Laminated Steel. For Welding. 30mm x 30mm. What comes in the box QuantityItem 1 CAME CGZ6 1m Galvanised Rack
Galvanised steel 30x8mm rack CGZS
CAME CGZS 1m toothed drive rack. Module 4. Galvanized. Bolt On with Distancers. 30mm x 8mm. What comes in the box QuantityItem 1 CAME CGZS 1m Galvanised Rack with Bolts and Distancers.
Galvanised steel CGZ 22x22mm rack
3 Year guarantee
Galvanised Steel Telescopic Arm with 50mm Splined Bushing 950BS
Galvanised steel telescopic arm with 50mm splined bushing.
GEKO Articulated Arms (GEKO/BA, GEKO/BS, GEKO/BL, GEKO/BLA)
GEKO Articulated Arms (GEKO/BA, GEKO/BS, GEKO/BL, GEKO/BLA) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 629260 GEKO/BA Aluminium articulated arm for GEKO and Angolo operators 629261 GEKO/BS Rail sliding arm, painted galvanized steel, for GEKO and Angolo operators 629262 GEKO/BL Long arm for GEKO, painted galvanized steel 629263 GEKO/BLA Long arm for GEKO, aluminium
GEKO/SF - External unlocking device by cable (4,5m) to be used with BLINDOS
GEKO/SF - External unlocking device by cable (4,5m) to be used with BLINDOS Pack version GEKO/SF + BLINDOS is available here (click).
3 Year guarantee
Grease gun adapter for frog shoe x 15 M6
CAME M6 Grease Gun Adapter for Frog Shoe. Enables Application of Grease During Maintenance. What comes in the box QuantityItem 1 CAME M6 Grease Gun Adapter for Frog Shoe
GSM opener No cost solution 250 phones
GSM opener for up to 250 phones
H93/RX22A/I - Plug-in Receiver 2 Channels 433.92 MHz
Product Overview The H93/RX22A/I is a versatile plug-in receiver featuring 2 channels and operating at 433.92 MHz. It is designed for seamless integration with control unit series H70, B70, EDGE, and CTRL. With the ability to store up to 500 codes, this receiver is ideal for various gate automation applications. Key Features 2-channel plug-in receiver Operates at 433.92 MHz Compatible with H70, B70, EDGE, and CTRL control units Stores up to 500 codes Standard power supply of 5V DC Product Description The H93/RX22A/I plug-in receiver is engineered to provide reliable performance in gate automation systems. Operating on a 433.92 MHz frequency with AM/ASK modulation, this receiver offers secure and stable communication with compatible control units. Its compact design ensures easy installation and integration into your existing setup. Specifications SpecificationDetails Standard power 5V DC Absorption 15mA Operating temperature -10 to +55°C Number of channels 2 Codification Fix code Modulation AM/ASK Carried frequency 433.92 MHz Exit Open collector Storable codes 500 Sensibility -107 dBm Input impedance 50 Ω Maximum dimension product (L x W x H) 60 x 32 x 12 mm Product weight packed 0.03 kg Applications The H93/RX22A/I is ideal for controlling gate automation systems in both residential and commercial environments. Its compatibility with a range of control units and ability to store multiple codes make it a reliable choice for managing access control efficiently.
HD.STC internal mechanical stops in open and close for HD18-45
2 Year guarantee
HD.STL internal mechanical stops in open and close for HD50
2 Year guarantee
HDR-15-12 DIN Rail Power Supply | 12V, 1.25A, 15W | Ultra-Slim Design
Product Overview The HDR-15-12 is an economical ultra-slim 12-15.4W DIN rail power supply, designed to be installed on TS-35/7.5 or TS-35/15 mounting rails. With a compact 17.5mm width, it allows for space-saving installation inside cabinets. Product Description Designed for efficiency and reliability, the HDR-15-12 DIN Rail Power Supply features short circuit, overload, and over voltage protection to ensure safe operation. Its ultra-slim 17.5mm design makes it ideal for applications where space is limited. The power supply is cooled by free air convection and includes an LED indicator for power status. The adjustable DC voltage output provides flexibility for various applications. Key Features Short circuit, overload, and over voltage protection Ultra-slim 17.5mm design LED indicator for power on Adjustable DC Voltage output TS-35/7.5 or TS-35/15 Mountable Cooled by free air convection No load power consumption <0.3W What's in the Box 1 x HDR-15-12 DIN Rail Power Supply Installation instructions Warranty card Specifications Model: HDR-15-12 Output Voltage: 12V Output Current: 1.25A Power Output: 15W Mounting: TS-35/7.5 or TS-35/15 Dimensions (HxWxD): 90 x 58.4 x 17.5mm Power Consumption: <0.3W (no load)
Heating Element PW1 | For Automation Systems
Product Overview The PW1 Heating Element is designed to maintain a suitable temperature for automation systems, ensuring correct operation even under severe weather conditions. Each element has a consumption of 20W and is highly efficient thanks to the silicone sheath that covers the resistance and enhances heat diffusion. Key Features Maintains suitable temperature for automation systems Consumes 20W per element Silicone sheath for increased heat diffusion Directly fed by 230/120 Vac power supply through the TW1 thermostat Ensures correct operation under severe weather conditions Product Description Heating Element PW1 for Automation Systems The PW1 Heating Element is an essential component for maintaining the optimal temperature of your automation system. This element ensures that the system operates correctly even in extreme weather conditions, providing reliable performance and efficiency. Efficient and Reliable Each heating element consumes only 20W, making it an energy-efficient solution. The silicone sheath covering the resistance not only protects the element but also enhances the diffusion of heat, ensuring that the system remains at a suitable temperature for optimal operation. Easy Integration The PW1 Heating Element is directly powered by a 230/120 Vac power supply through the TW1 thermostat, ensuring seamless integration into your existing automation system. This setup provides precise temperature control, helping to maintain consistent performance regardless of external weather conditions. With its reliable performance and efficient design, the PW1 Heating Element is a crucial addition to any automation system requiring temperature regulation to function correctly in all weather conditions.
High Mechanical Edge CMA 2MT with Aluminium Profile - 2m
High mechanical edge with aluminium profile - length 2m.
High Mechanical Edge with Aluminium Profile CMA 1.7MT
High mechanical edge with aluminium profile, measuring 1.7m.
High Mechanical Edge with Aluminium Profile CMA1 5MT - 1.5m
High mechanical edge with aluminium profile measuring 1.5m.
High Mechanical Sensitive Edge with Aluminium Profile CMA2 5MT - Length 2.5m
High mechanical edge with aluminium profile - length 2.5m.
Indicator Lights for Click Fixture XBA18
Indicator lights for click fixture on the upper or lower side of the bar - length 8m - For M7BAR.
Indicator lights XBA4 for click fixture
Indicator lights for click fixture on the upper or lower side of the bar - length 4m - Accessory for M3BAR.
Indicator lights XBA6 for click fixture - 6m
Indicator lights for click fixture on upper or lower side of the bar - length 6m - Accessory for M5BAR.
INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit)
INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit) The invisible Interio gate closer, with matching hinge set, is completely built into the gate frame. This highly aesthetic solution opens and closes the gate comfortably. The integrated pre-tension ensures an efficient and flawless installation where speed and final snap can be adjusted accurately to fit any need. A constant closing speed is guaranteed in all weather conditions, without any adjustments needed. Interio is perfectly suited for both left and right turning gates. Is available on it's own or with ground or wall mounting kit. SPECIFICATIONS Self-closing up to 125° (depending on the situation) with adjustable closing speed and final snap Powder coated aluminium housing Constant closing speed in hot or cold weather Vandal-proof For left & right turning gates Available for 50 and 60 mm profiles with max 2 mm thickness Secure, fast and easy attachment thanks to Quick-Fix mounting bolts Optional sets available for ground and wall installation Recommended with Gatestop Easy to open: Max. 20 Nm DRAWING
IP54 surface mounted 4 channel receiver RBE4RC
3 Year guarantee
IP54 surface mounted bi channel receiver RE862M
868.35 MHz surface-mounted receivers Came - 12 - 24 V AC - DC IP54 surface-mounted bi-channel receiver.001RE862
CAME CGIU Joint for 1/2 Inch Chain. Not for the FL180. What comes in the box QuantityItem 1 CAME CGIU 1/2 Inch Chain Link
Key unlock system - Fab accessory.
KIT CLIMB - Adapter set for gates on incline. For gates up to 2m - 150 kg; max gradient 12%
KIT CLIMB - Adapter set for gates on slopes. For gates up to 2m - 150 kg; max gradient 12% Kit Climb allows you to install on a slope with a gradient up to 12%. It can be used on gates up to 2 meters and 150 kg. It is suitable for GEKO and LIVI 502 operators.
Kit CMBK4 for Installing a Low Mechanical Edge - 4m
Kit for installing a low mechanical edge, with aluminium profiles measuring 4m (to use together with CB).
Kit CMBK6 for Installing a Low Mecha - 6mnical Edge
Kit for installing a low mechanical edge, with aluminum profiles measuring 6m (to use together with CB).
KIT EDGE1/22/UK - 36V Control Kit for 2 Brushless Motors
Product Overview The KIT EDGE1/22/UK is an advanced electronic control kit designed for managing two 36V brushless motors. It comes complete with a digital controller, plug-in radio receiver, transmitters, photocells, a flashing light, and an antenna, ensuring seamless operation and enhanced security for your automated gate systems. Key Features 36V digital controller for two brushless motors Includes plug-in radio receiver with 2 channels Comes with two 2-channel transmitters Synchronized external photocells (up to 4 pairs) LED flashing light for visual alerts High-performance antenna for reliable signal reception Product Description The KIT EDGE1/22/UK is specifically designed to provide robust control for two brushless motors operating at 36V. This kit is perfect for various applications, including swing and sliding gate systems, ensuring reliable and efficient performance. The inclusion of a digital controller and various accessories enhances the functionality and safety of your automated gate setup. What's in the Box 1 x EDGE1/Box Control Unit: Digital controller for managing two brushless motors. 1 x H93/RX22A/1 Plug-in Radio Receiver: Operates at 433.92 MHz with 2 channels for seamless operation. 2 x E80/TX52R/2 Transmitters: Dual-channel transmitters for remote control of your gate system. 1 x R90/F4ES Pair of External Photocells: Synchronized photocells for enhanced safety, supporting up to 4 pairs. 1 x R92/LED24 LED Flashing Light: Provides visual alerts during gate operation. 1 x R91/AN1/LR1 Antenna: Ensures reliable signal reception for optimal performance. Specifications ComponentDescription Control Unit EDGE1/Box for 2 Brushless Motors Radio Receiver H93/RX22A/1 Plug-in, 2 channels, 433.92 MHz Transmitters 2 x E80/TX52R/2, Dual-channel, 433.92 MHz Photocells R90/F4ES, Synchronized, Maximum 4 pairs Flashing Light R92/LED24 Antenna R91/AN1/LR1 Applications The KIT EDGE1/20 is ideal for controlling swing and sliding gate systems in both residential and commercial settings. Its advanced digital controller and comprehensive accessory package ensure efficient and secure operation.
KIT KEY GEKO - GEKO unlocking key (5 pcs)
KIT KEY GEKO - GEKO unlocking key (5 pcs) Unlocking key to be used on GEKO, comes in package of 5.
Left hand straight telescopic transmission arm FERNI-BSX
CAME FERNI-BSX Left-Hand Straight Transmission Arm plus Slide Guide for Gate Leaves up to 2m. What comes in the box QuantityItem 1 CAME FERNI-BSX LH Transmission Arm
Limit switch device DU.350FC for 1x DU.350 motor
2 Year guarantee
Limit switch device DU.FCN for DU.It motor
2 Year guarantee
Locinox POWERSTONE | 24V-60W Switching Power Supply Unit | High Quality, Plug & Play
Product Overview The Locinox POWERSTONE 24V-60W Switching Power Supply Unit is a high-quality power supply designed for efficient and reliable performance. This unit features a plug & play installation, ensuring a hassle-free setup. The integrated overload indicator adds an extra layer of protection, making it a robust solution for various applications. It can be mounted on a DIN-rail or directly, providing flexibility in installation. Key Features High-quality 60W switching-mode power supply Plug & play installation guaranteed Integrated overload indicator for added protection Mounting options: DIN-rail or direct mounting Auxiliary 24V DC output available Product Description Specifications Input: 110-240 VAC, 50-60Hz, 1.2A maximum Output: +24V DC, 2.5A maximum, 60W Mounting: DIN-rail or direct mounting Overload Indicator: Resettable Auxiliary Output: 24V DC available The Locinox POWERSTONE 24V-60W Switching Power Supply Unit is designed to deliver reliable and efficient power. With an input range of 110-240 VAC and a maximum output of +24V DC at 2.5A, this power supply unit is suitable for a wide range of applications. The integrated overload indicator helps to protect your devices by alerting you to potential overload situations. Installation is made easy with the plug & play design, ensuring a quick and hassle-free setup. The unit can be mounted on a DIN-rail or directly, providing flexibility based on your installation needs. Additionally, the auxiliary 24V DC output is available for powering additional devices, making it a versatile solution for your power needs. The robust construction and high-quality components of the Locinox POWERSTONE ensure long-lasting performance and reliability. Whether for industrial, commercial, or residential applications, this power supply unit is an excellent choice for powering your devices efficiently and safely. NOTE: Images may differ from the actual product.
Locinox SAKL QF | Adjustable Stainless Steel Keep | Square or Round Profiles
Product Overview The Locinox SAKL QF is an adjustable stainless steel keep designed for use with square or round gate profiles. This robust keep is suitable for a wide range of gate types, including garden, ornamental, and industrial gates. Featuring a unique Quick-Fix system, the SAKL QF ensures a fast and strong mounting. The adjustable aluminium stop plate with a rubber strip accommodates gate profiles from 40 to 60 mm in width, providing a secure and reliable fit. The design has been refined to make the strike accept the latchbolt more easily, enhancing its functionality. Key Features Stainless steel bolt receiver for durability Extruded aluminium stop plate with rubber strip Easy left or right changing Innovative Quick-Fix mounting for fast installation Adjustable for gate profiles from 40 to 60 mm width Suitable for both rectangular and round profiles Product Description Specifications Material: Stainless steel bolt receiver, aluminium stop plate Mounting: Quick-Fix system Adjustability: Fits gate profiles from 40 to 60 mm width Profile Compatibility: Suitable for rectangular and round profiles Stop Plate: Aluminium with rubber strip The Locinox SAKL QF adjustable keep is designed to provide a secure and reliable solution for a variety of gate types. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, combined with a rubber strip, enhances the keep's ability to securely hold the gate in place while minimizing noise and wear. The innovative Quick-Fix system simplifies the installation process, allowing for a fast and strong mounting without the need for extensive tools or expertise. The SAKL QF is adjustable to fit gate profiles from 40 to 60 mm in width, providing versatility and compatibility with a wide range of gate designs. Additionally, the keep is designed for easy left or right changing, further enhancing its adaptability. This keep is ideal for garden, ornamental, and industrial gates, offering a reliable and aesthetically pleasing solution. The refined design ensures that the strike accepts the latchbolt easily, providing a smooth and secure locking mechanism. NOTE: Images may differ from the actual product.
M FAB MEA1 Accessory for Opening
Accessory for opening up to 360' for gates max 2.5m in length.
M FAB MEA3 Lever - Type Key Unlock System
Lever - type key unlock system to use when system is installed on surfaces such as sand or earth.
M6 Rack 30x30x1000mm - Zinc coated, to be coupled with RUA12.
MAC/FM Mechanical stops for MAC / STING (2 pcs) - for 1 operator
MAC/FM Mechanical stops for MAC / STING (2 pcs) - for 1 operator MAC/FM Mechanical Limit Stops For 1 x Mac or Sting Ram.
Magnetic key switches surface mounted SEM-2
3 Year guarantee
Manual release lock BOB.CS with personalised yale key x 2
2 Year guarantee
Manual release SB.KL for SUBWAY (SB) motor (single)
2 Year guarantee
Manual release SB.SL for SUBWAY (SB) motor (single)
2 Year guarantee
Limit switch stop for JET
Mechanical Travel Stops PLA13 for Closing and Opening Manoeuvres
mechanical travel stops for closing and opening maneuvers - mechanical accessory.
MEM2048 memory extension chip to allow up to 2048 remotes
2 Year guarantee
MLS/SFR Adjustable Fixing Plates to be Screwed
MLS/SFR Adjustable Fixing Plates to be Screwed This item is to be used with following DEA ranges: DEA STING DEA LOOK
Mobile stand for bars - New fully reinforced version - Accessory for M5BAR.
Module to Control Automation Systems and Sun Sensor Activation Command Niceway WM080G
Niceway module to control 80 open-stop-close automation systems either individually or in multi-group mode and sun sensor activation command.
Module to Control Automation Systems and Sun Sensor Activation WM004G
Niceway module to control 4 open-stop-close automation systems either individually or in multi-group mode and sun sensor activation command.
Module WM001G to control Open-Stop-Close automation System
Niceway Module to control 1 Open-Stop-Close automation system either individually or in multi-group mode.
Module WM002G to Control 2 Open-Stop-Close Automation Systems
Niceway module to control 2 Open-Stop-Close automation systems either individually or in multi-group mode.
Module WM003G to Control Automation Systems Individually or Multi-Group
Niceway module to control 3 open-stop-close automation systems either individually or in multi-group mode.
Module WM006G to control 6 Automation Systems
Niceway module to control 6 open-stop-close automation systems either individually or in multi-group mode.
Multi position bracket for BOB/BILL21-30
2 Year guarantee
Multi-Purpose Interface OBOX2B with USB Connection Cable and Bluetooth
Multipurpose interface complete with software "O-Box Software Suite" with USB connection cable and integrated Bluetooth module. Dual band -For devices at 433.92 / 868.46 MHz.
Natural anodised aluminium post CSS
CAME CSS Natural Anodised Aluminium Post 1m High. What comes in the box QuantityItem 1 CAME CSS Aluminium Column
Niceway GO Mini Cover WCF | Available in Various Colors
Product Overview The Niceway GO Mini Cover WCF is a stylish and functional accessory for your Niceway transmitter. This mini cover is available in a variety of colors, allowing you to customize the appearance of your transmitter to match your preferences or decor. The Niceway GO Mini Cover provides protection and a fresh look to your device. Available Colors Fern Green - WCF Graphite - WCG Ice Blue - WCI Orange - WCO Key Features Stylish mini cover for Niceway transmitters Available in four colors Customizable to match your preferences Provides protection and a fresh look Durable and easy to install Product Description Niceway GO Mini Cover - Available in Various Colors The Niceway GO Mini Cover is designed to enhance the look and functionality of your Niceway transmitter. Available in four attractive colors, this mini cover allows you to personalize your device. The available colors are fern green (WCF), graphite (WCG), ice blue (WCI), and orange (WCO). Color Options Fern Green: WCF Graphite: WCG Ice Blue: WCI Orange: WCO The Niceway GO Mini Cover is durable and easy to install, providing both protection and a fresh look for your transmitter. Whether you want to match your home decor or simply prefer a specific color, the Niceway GO Mini Cover offers the customization you need.
Niceway OPLA | Squared Wall Plate Available in Various Colors
Product Overview The Niceway OPLA is a squared wall plate designed for use with Niceway transmitters. This wall plate is available in a variety of colors, providing a stylish and customizable solution for mounting your transmitter. The OPLA wall plate ensures a secure and neat installation, blending seamlessly with your interior decor. Available Colors White - WSW Black - WSB Aluminium - WSA Graphite - WSG Neutral Transparent - WST Seawater - WSS Key Features Squared wall plate for Niceway transmitters Available in six colors Stylish and customizable Secure and neat installation Blends seamlessly with interior decor Product Description Niceway OPLA Squared Wall Plate - Available in Various Colors The Niceway OPLA squared wall plate is an essential accessory for mounting Niceway transmitters. This wall plate is available in six distinct colors, allowing you to choose the one that best matches your interior design. The colors available are white (WSW), black (WSB), aluminium (WSA), graphite (WSG), neutral transparent (WST), and seawater (WSS). Color Options White: WSW Black: WSB Aluminium: WSA Graphite: WSG Neutral Transparent: WST Seawater: WSS The OPLA wall plate ensures a secure fit for your transmitter, maintaining a neat and organized appearance. Its durable construction and stylish design make it an excellent choice for enhancing the functionality and aesthetics of your control system setup.
Niceway OX2 | Pre-Wired Universal Receiver, 2 Channels, 433.92 MHz
Product Overview The Niceway OX2 is a pre-wired, universal 2 channel receiver operating on the 433.92 MHz frequency. Designed without a built-in transmitter, this receiver is part of the NiceOne series and can be used with any type of control unit. It operates using 2 voltage-free contact relays, making it suitable for automation systems such as gates, garage doors, and road barriers. Key Features Universal, pre-wired receiver with 6-core cable 2 channel receiver without built-in transmitter Works on 433.92 MHz frequency Can memorize up to 1024 remote controls Part of the Nice Opera system Communicates using Nice O-Code radio encoding system Compatible with FloR, TTS, Smilo, and Flo encoding systems* *Some exclusive NiceOpera system functions cannot be used with these encoding systems. Product Description Niceway OX2 Pre-Wired Universal 2 Channel Receiver The Niceway OX2 is a versatile and reliable receiver designed to integrate seamlessly with various control units. It features a pre-wired 6-core cable for easy connection and operates on a 433.92 MHz frequency. As part of the NiceOne series, the OX2 receiver is ideal for use in automation systems including gates, garage doors, and road barriers. Compatibility and Encoding This receiver is compatible with the Nice Opera system and communicates using the Nice O-Code radio encoding system. It also supports FloR, TTS, Smilo, and Flo encoding systems, although some exclusive NiceOpera system functions may not be available with these encoding systems. High Capacity and Easy Programming The OX2 receiver can memorize up to 1024 remote controls, making it suitable for large installations. Programming your remote controls is straightforward, ensuring quick and efficient setup. How Does It Work? The Niceway OX2 receiver operates using 2 voltage-free contact relays, allowing it to be used with any type of control unit. To install, simply connect the 6-core cable to your control unit as per the product manual and program your remote controls.
Niceway OX2T Pre-Wired Receiver - 2 Channels / With Built-In Transmitter
Pre-wired universal 2 channel receiver 433.92 MHz - with built in transmitter.
Niceway OX4T | Pre-Wired 4 Channel Receiver with Built-In Transmitter
Product Overview The Niceway OX4T is a pre-wired universal 4 channel receiver with a built-in transmitter, operating on the 433.92 MHz frequency. This versatile receiver allows you to integrate Nice remote controls into automation systems from other brands or manufacturers. The OX4T features 4 voltage-free contact relays, making it compatible with any type of control unit. Key Features Universal receiver with built-in transmitter Operates on 433.92 MHz frequency 4 channels Part of the NiceOne series of radio receivers Compatible with Nice Opera system Supports various Nice radio encoding formats: O-Code, FloR, TTS, Smilo, Flo (rolling code) 4 voltage-free contact relays Product Description Niceway OX4T Pre-Wired 4 Channel Receiver with Built-In Transmitter The Niceway OX4T receiver is a universal solution for integrating Nice remote controls into diverse automation systems. With its built-in transmitter and 4 channels, the OX4T operates on the 433.92 MHz frequency, ensuring robust and reliable performance. As part of the NiceOne series and Nice Opera system, this receiver offers advanced functionality and compatibility. Universal Compatibility The OX4T receiver is designed to work with any type of control unit, thanks to its 4 voltage-free contact relays. This universal compatibility makes it an ideal choice for integrating Nice remote controls into automation systems from various brands or manufacturers. Advanced Radio Encoding The OX4T supports multiple Nice radio encoding formats, including O-Code, FloR, TTS, Smilo, and Flo (rolling code). This ensures seamless communication and integration with Nice remote controls, providing flexible and reliable control options. Easy Installation and Integration The pre-wired design of the OX4T receiver simplifies installation, allowing for quick and easy integration into your existing control systems. Whether you need to enhance an existing setup or create a new one, the OX4T offers a user-friendly and efficient solution.
Niceway OXI Receiver | 4 Channels, 433.92 MHz, Without Built-In Transmitter
Product Overview The Niceway OXI Receiver is a 4-channel, 433.92 MHz receiver designed for use with Nice control boards that have SM ports. This receiver does not include a built-in transmitter but comes with advanced opera system functions, providing user-friendly programming and management tools for efficient control and operation. Key Features 4-channel receiver Operates on 433.92 MHz frequency Compatible with Nice control units with SM ports Handles up to 1024 transmitters/users User-friendly programming and management tools Printable log of codes Three levels of password protection Plug-in type with connector Product Description Niceway OXI Receiver - 4 Channels, 433.92 MHz The Niceway OXI Receiver is an advanced 4-channel receiver operating on the 433.92 MHz frequency, designed without a built-in transmitter. It is compatible with Nice control boards equipped with SM ports, making it a versatile addition to your control system. The receiver features opera system functions that enhance user experience with easy programming and management tools. Advanced Functionality and Security This receiver can handle up to 1024 transmitters/users, making it suitable for large installations. It offers user-friendly programming and management tools, along with a printable log of codes for easy record-keeping. The receiver also features three levels of password protection, ensuring secure access and operation. Easy Installation and Compatibility The Niceway OXI Receiver is a plug-in type radio receiver with a connector, ensuring easy installation. It is compatible with Nice control units with SM ports, providing a seamless integration into your existing control system.
Niceway OXIFM Receiver - Without Built-In Transmitter
868.46 MHz receiver with connector - 4 channels - without built-in transmitter.
1m nylon drive rack (no fixings), for all models except Oberon & SP3500
O-View Clamp OVA1 for Fitting Connectors RJ14
O-View Clamp for fitting connectors RJ14
O-View OVA2 Connectors for flat 4-Wire Cable
Connectors RJ14 - Type 6/4 - for Flat 4-Wire Cable.
O-View OVBT Bluetooth Module for O-View and Software
Product Overview The O-View OVBT Bluetooth Module is designed for use with the O-View and O-View Suite, allowing for control, programming, and diagnostics of devices equipped with a BUS T4 connection. This module enables seamless connectivity with your PDA, smartphone, or PC, offering both on-site and remote management via GPRS. Key Features Bluetooth module for O-View and O-View Suite Enables control, programming, and diagnostics Compatible with PDA, smartphone, and PC Works with devices equipped with BUS T4 connection Allows remote management via GPRS Product Description O-View OVBT Bluetooth Module for O-View and Software The O-View OVBT Bluetooth Module is an essential accessory for enhancing the functionality of your O-View and O-View Suite. This module provides a versatile solution for controlling, programming, and diagnosing devices with a BUS T4 connection. By connecting to your PDA, smartphone, or PC, you can manage your systems efficiently, either on-site or remotely via GPRS. Enhanced Connectivity and Control The OVBT module offers robust Bluetooth connectivity, enabling seamless integration with your O-View and O-View Suite. This allows for convenient control and management of your automation systems using a variety of devices, including PDAs, smartphones, and PCs. Remote Management Capability One of the standout features of the O-View OVBT module is its ability to facilitate remote management via GPRS. This ensures you can perform diagnostics and make adjustments to your systems from virtually anywhere, providing flexibility and peace of mind. Comprehensive Programming and Diagnostics The OVBT module supports comprehensive programming and diagnostics for devices equipped with a BUS T4 connection. This functionality ensures that you can maintain optimal performance and quickly address any issues that may arise, enhancing the reliability and efficiency of your automation systems.
O-View OVBT GSM Module for O-View and Software Suite
Product Overview The O-View OVBT GSM Module is designed for use with the O-View and O-View Software Suite, allowing for control, programming, and diagnostics of devices equipped with a BUS T4 connection. This module enables seamless connectivity with your PDA, smartphone, or PC, offering both on-site and remote management via GPRS. Key Features GSM module for O-View and O-View Software Suite Enables control, programming, and diagnostics Compatible with PDA, smartphone, and PC Works with devices equipped with BUS T4 connection Allows remote management via GPRS Product Description O-View OVBT GSM Module for O-View and Software Suite The O-View OVBT GSM Module is an essential accessory for enhancing the functionality of your O-View and O-View Software Suite. This module provides a versatile solution for controlling, programming, and diagnosing devices with a BUS T4 connection. By connecting to your PDA, smartphone, or PC, you can manage your systems efficiently, either on-site or remotely via GPRS. Enhanced Connectivity and Control The OVBT GSM module offers robust connectivity, enabling seamless integration with your O-View and O-View Software Suite. This allows for convenient control and management of your automation systems using a variety of devices, including PDAs, smartphones, and PCs. Remote Management Capability One of the standout features of the O-View OVBT GSM module is its ability to facilitate remote management via GPRS. This ensures you can perform diagnostics and make adjustments to your systems from virtually anywhere, providing flexibility and peace of mind. Comprehensive Programming and Diagnostics The OVBT GSM module supports comprehensive programming and diagnostics for devices equipped with a BUS T4 connection. This functionality ensures that you can maintain optimal performance and quickly address any issues that may arise, enhancing the reliability and efficiency of your automation systems.
OBOX2 | Multi-Purpose Interface with USB Connection
Product Overview The OBOX2 is a multi-purpose interface designed to facilitate the configuration and programming of devices at 433.92 MHz and 868.46 MHz. This interface comes complete with the O-Box Software Suite and a USB connection cable, enabling easy connection to your PC or PDA for direct programming and management. Key Features Multi-purpose interface with USB connection Compatible with devices at 433.92 MHz and 868.46 MHz Complete with O-Box Software Suite Enables configuration and programming from PC or PDA Includes USB connection cable Product Description OBOX2 Multi-Purpose Interface with USB Connection The OBOX2 is a versatile and essential tool for configuring and programming devices operating on the 433.92 MHz and 868.46 MHz frequencies. This interface is designed to work seamlessly with the O-Box Software Suite, allowing for easy and efficient management of your devices directly from your PC or PDA. Dual Band Compatibility The OBOX2 supports dual band frequencies, making it compatible with devices operating at both 433.92 MHz and 868.46 MHz. This broad compatibility ensures that you can manage a wide range of devices using a single interface. Complete Software Solution The included O-Box Software Suite provides a comprehensive solution for configuring and programming your devices. With this software, you can easily set up, modify, and manage your devices' settings and operations. Easy Connectivity The OBOX2 interface comes with a USB connection cable, allowing for straightforward and reliable connectivity to your PC or PDA. This ensures that you can quickly and easily connect the interface to your devices for programming and configuration. The OBOX2 multi-purpose interface is an invaluable tool for any setup requiring precise and efficient device management. With its dual band compatibility, comprehensive software suite, and easy connectivity, the OBOX2 provides all the functionality you need to manage your devices effectively.
ONDO Table Holder WAX - White Plastic and Ice Blue Rubber
Niceway ONDO table holder, white plastic and ice blue rubber.
Outside key lock JK.UL for sectional doors
2 Year guarantee
OX2TFM Receiver | 2 Channels with Built-In Transmitter, 868.46 MHz
Product Overview The OX2TFM is a pre-wired 2 channel receiver with a built-in transmitter, operating on the 868.46 MHz frequency. This universal receiver is designed for use with all types of control units, making it ideal for controlling automation systems, lighting, irrigation, and other electric circuits. Its convenient and practical design ensures quick and user-friendly programming. Key Features 2 channel receiver with built-in transmitter Operates on 868.46 MHz frequency Pre-wired for universal use Compatible with all types of control units Suitable for automation, lighting, irrigation, and other electric circuits Convenient and practical design Quick and user-friendly programming Product Description OX2TFM Receiver - 2 Channels with Built-In Transmitter The OX2TFM is a versatile and reliable receiver designed to control a wide range of systems, including automation, lighting, and irrigation. With its built-in transmitter and 2 channels, this receiver operates on the 868.46 MHz frequency, providing robust performance and flexibility. The pre-wired design ensures easy installation and compatibility with various control units. Universal Compatibility This receiver is universally compatible with all types of control units, making it an ideal solution for various applications. Whether you need to control an automation system, lighting setup, irrigation system, or other electric circuits, the OX2TFM provides reliable and efficient performance. Easy Programming and Installation The OX2TFM receiver is designed for convenience and practicality, featuring quick and user-friendly programming. The pre-wired design simplifies the installation process, allowing you to easily integrate the receiver into your existing control systems.
PA6 Nylon & fiberglass 20x20mm rack
3 Year guarantee
Pack of 50 glass transponder bulbs TAG-50
3 Year guarantee
Pair of PHWA1 Adapters for PHW on PPH1 Posts
Pair of adapters for PHW on PPH1 posts.
Pivot joint XBA10 for bars up to 4m
Pivot joint for bars up to 4m - Accessory for M3BAR.
Plug in 2 channel universal receiver ONE.2WI
2 Year guarantee
CAME AF43S Plug in the radio frequency card for S Keypads. 433 MHz. What comes in the box QuantityItem 1 CAME AF43S Frequency Card
CAME AF868 Plug in radio frequency card for 868 MHz remotes. What comes in the box QuantityItem 1 CAME AF868 Frequency Card
Plug in radio frequency card AF43TW
CAME AF43TW Plug-in Radio Frequency Card. What comes in the box QuantityItem 1 CAME AF43TW Frequency Card
Portable Unit O-View | Programming and Diagnostics for BUS T4 Devices
Product Overview The Portable Unit O-View is a versatile device designed for control, programming, and diagnostics of devices equipped with a BUS T4 connection. It can be used on-site or remotely via GPRS when connected to your PDA, Smartphone, or PC. The O-View provides a straightforward and intuitive interface for accessing and adjusting all control unit parameters, making it an essential tool for installation, maintenance, and centralized management of automation systems. Key Features Compatible with devices equipped with a BUS T4 connection Direct connection via BUS T4 cable (supplied) Multi-function display for easy access to control unit parameters Intuitive programming mode with simple menus Remote management via GPRS with PDA, Smartphone, or PC Creates a network for local or remote centralized management Automatic device recognition and relevant parameter display Built-in clock with integrated backup battery for scheduled commands Practical wall-mounted support included Two-level protection with user and installer passwords Product Description The O-View Portable Unit is designed to facilitate the control, programming, and diagnostics of devices equipped with a BUS T4 connection. This multi-functional display unit connects directly to the compatible control unit using the supplied BUS T4 cable, granting access to all control unit parameters. This capability allows you to adapt the system to meet various needs through a single, simple programming mode with intuitive menus, eliminating the need to consult specific instructions. Advanced Control and Management By connecting the O-View permanently to a control unit or a group of control units via BUS T4, you can create a network for local or remote centralized management. The O-View powers up and automatically recognizes all devices on the network, displaying only the specific parameters needed for each device, thus eliminating any irrelevant or redundant information. Scheduling and Automation The built-in clock, equipped with an integrated backup battery, allows for the programming of command delivery at set times. This feature is perfect for automating the opening and closing of complex industrial and commercial systems or for creating “scenarios”. The practical wall-mounted support (supplied) adds convenience, allowing you to place the O-View in an optimal location for easy access and operation. Enhanced Security The O-View offers two levels of protection via user and installer passwords, ensuring differentiated access to more reserved functions and increased safety. This security measure guarantees that only authorized personnel can access sensitive settings and perform critical adjustments. Specifications Connection type: BUS T4 Compatibility: PDA, Smartphone, PC for remote management Display: Multi-function, intuitive interface Clock: Built-in with integrated backup battery Security: User and installer password protection Support: Wall-mounted support included Use Cases The O-View can be used temporarily for programming and maintenance or installed permanently on-site to take full advantage of local or remote centralized management. Its portability and comprehensive functionality make it a valuable tool for installers and maintenance personnel in industrial and commercial environments.
Power cable collecting device BRC15
3 Year guarantee
Pre-Wired Receiver OXITFM - With Built-In Transmitter
868.46 MHz pre-wired receiver - 4 channels - with built-in transmitter.
PROCON MD102-C Magnetic Vehicle Detection Kit | Prevent Accidental Bollard Activation
Product Overview The PROCON MD102-C Magnetic Vehicle Detection Kit is designed to prevent automatic bollards from accidentally rising beneath your vehicle. This next-generation vehicle detection system can also be used to open or close your bollards when a vehicle passes over the loop. Key Features Prevents accidental bollard activation Can be used to open or close bollards MD102 Probe can be buried in the road surface or mounted above ground MD102C Control Unit enables configuration and testing of the probe Complete ready-to-install vehicle detection system Includes 15 meters of cable pre-attached to the probe Super easy to install – no cutting in of induction loops required Install the probe underground or on a post next to your driveway Simply connect the probe cable to the control unit terminals 12/24Vdc Power input Manufactured by Procon Electronics, ensuring quality and reliability Can be used for presence and pulse detection Product Description The PROCON MD102-C Magnetic Vehicle Detection Kit offers a reliable and efficient solution for managing automatic bollards. By installing this system, you can prevent your bollards from accidentally rising beneath your vehicle, ensuring the safety and protection of both the vehicle and the bollard system. The MD102 Probe can be installed in various ways: buried in the road surface underneath the vehicle, mounted alongside the vehicle, or installed above ground next to the vehicle's passage. The accompanying MD102C Control Unit allows for easy configuration and testing of the probe, making the installation process straightforward. This complete vehicle detection system comes with 15 meters of cable pre-attached to the probe, eliminating the need for complex wiring or cutting induction loops. Simply connect the probe cable to the control unit terminals, and the system is ready to go. The MD102C Control Unit operates on a 12/24Vdc power input, providing flexibility for various installation environments. Manufactured by Procon Electronics, the MD102-C kit guarantees quality and reliability, ensuring consistent performance for your vehicle detection needs. Whether you need presence detection or pulse detection, this system has you covered. Options PROCON MD102C-CONTROLLER & MD102-PROBE (FULL KIT) PROCON MD102C-CONTROLLER ONLY PROCON MD102-PROBE ONLY Technical Specifications FeatureSpecification Power Input 12/24Vdc MD102C Control Unit 12/24VAC/DC, 50/60Hz, 30mA Cable Length 15 meters
PUSHBAR Aluminium Push Bar | 1400mm Length | Easy Gate Exit
Product Overview The Aluminium PUSHBAR is designed to facilitate easy opening and free exit of a gate with a simple push. This 1400mm length push bar replaces the standard handle, operates the daybolt, and can be quickly installed on new or existing Locinox surface-mounted gate locks (LA, LP, and LF chassis - PUSHBAR-L-1400) or hybrid insert locks (PUSHBAR-H-1400). The PUSHBAR is versatile and can be shortened to fit any gate. Key Features Black powder-coated aluminium push bar with stainless steel mechanism Available in 1400mm length, can be shortened to fit any gate Easy installation with Quick-Fix Compatible with Locinox surface-mounted gate locks (LA, LP, LF) and hybrid insert locks (H-Metal, H-Wood, Sixtylock) Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Suitable for left and right turning gates Product Description The PUSHBAR aluminium push bar is an excellent solution for ensuring a quick and simple gate exit. Its 1400mm length offers flexibility as it can be shortened to fit any gate size. The black powder-coated aluminium finish with a stainless steel mechanism ensures durability and a sleek appearance. The PUSHBAR is compatible with a wide range of Locinox gate locks, making it a versatile addition to any gate setup. Specifications (PUSHBAR-L-1400) Black powder-coated aluminium push bar with stainless steel mechanism For left and right turning gates Easy to install on the gate with Quick-Fix Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Specifications (PUSHBAR-H-1400) Black powder-coated aluminium push bar with stainless steel mechanism Only compatible with H-Metal, H-Wood, and Sixtylock Easy & fast mounting: Quick-Fix For left and right turning gates Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Installation and Usage Installing the PUSHBAR is straightforward with the Quick-Fix system, allowing for easy mounting on both new and existing gates. The push bar is suitable for left and right turning gates, providing flexibility in installation. The blinded 8 mm follower ensures a secure fit, and the push bar can be combined with half handle sets with an 8 mm follower for enhanced functionality. Durability and Protection The black powder-coated aluminium construction of the PUSHBAR ensures resistance to weather and wear, making it suitable for outdoor use. The stainless steel mechanism adds to its durability, ensuring long-lasting performance. This robust design guarantees reliable operation and easy gate access for years to come.
Racks for sliding gates - 1m length (111, 112, 113, 116)
DEA Racks for sliding gates - 1m length (111, 112, 113, 116) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 619000 111* Nylon rack, with fixing screws (1m) 126001 112** Galvanized steel rack 22x22mm (1m) 126000 113** Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) 126008 116 Galvanized steel rack M6 (1m) NOTE: * Order in multiples of 10 ** Order in multiples of 4
3 channel NOVOTX radio transmitter
RBE4N - Surface mounted 4 channel radio module (806RV-0010)
CAME RBE4N (New Code: 806RV-0010) Surface Mounting IP54 12-24v AC - DC Four-Channel Radio Module. Needs AF card. What comes in the box QuantityItem 1 CAME RBE4N 4 Channel Radio Module
Rear Bracket for Toona Kit - 250mm long.
Rear extension bracket BOB.SL for BOB21/30
2 Year guarantee
Receiver OX2FM - 2 Channels Without Built-In Transmitter
Pre-wired Receiver with Opera System functions - 2 channels 868.46MHz without built-in transmitter.
Red Adhesive Reflector Strips WA10
Red adhesive reflector strips - Accessory for M3BAR, M5BAR, M7BAR.
Regulation Thermostat TW1 | For PW1 Heating Element
Product Overview The TW1 regulation thermostat is designed for use with the PW1 heating element. It activates the heating element when the detected temperature drops below the set threshold, gradually increasing the internal temperature of the product. This thermostat ensures that automation systems maintain optimal performance even in extreme weather conditions. Key Features Designed for use with the PW1 heating element Activates heating element when temperature drops below set threshold Adjustable intervention threshold between 0°C and -20°C Equipped with a button for operational testing at any time Product Description Regulation Thermostat TW1 for PW1 Heating Element The TW1 regulation thermostat is an essential component for maintaining the proper temperature of automation systems using the PW1 heating element. When the temperature detected by the thermostat falls below the set threshold, it activates the PW1 heating element to gradually raise the internal temperature, ensuring the system operates correctly in cold conditions. Adjustable Threshold The TW1 thermostat allows for the intervention threshold to be adjusted between 0°C and -20°C, providing flexibility to suit various environmental conditions and requirements. This adjustable feature ensures that the heating element activates precisely when needed to maintain optimal system performance. Easy Operational Testing The thermostat is equipped with a convenient button that allows users to perform operational tests at any time. This feature ensures that the heating element and thermostat are functioning correctly, providing peace of mind and reliable performance. With its adjustable threshold and easy-to-use test button, the TW1 regulation thermostat is a reliable and essential component for controlling the PW1 heating element, ensuring automation systems remain functional and efficient even in extreme weather conditions.
Reinforced Galvanised Steel Telescopic Arm with Splined Bushing 560BT
Reinforced galvanized steel telescopic arm with splined bushing.
Relay Wireless Interface IRW for Sensitive Edges with Wireless Transmitter
Wireless relay interface for sensitive edges with a wireless transmitter for control units with classical connections (stop and photo).
RI.P6 Mod 6 Pinion- (BULL1024/15M)
2 Year guarantee
Right hand straight telescopic transmission arm FERNI-BDX
CAME FERNI-BDX Right-Hand Straight Transmission Arm plus Slide Guide for Gate Leaves up to 2m. What comes in the box QuantityItem 1 CAME FERNI-BDX LH Transmission Arm
RL 650 Release System with Standard Lever
Release system with standard lever.
RL652 Standard Release Lever For Underground Motor
Roger Technology RL652 Standard Release Lever For Underground Motor
Roger Technology Brushless B70/1DC Control Board | 24V Control with Digital Encoder
Product Overview The Roger Technology Brushless B70/1DC Control Board is a state-of-the-art 24V control board designed specifically for sliding gates. Equipped with a digital encoder, this control board ensures precise and reliable operation, making it an ideal choice for both residential and commercial applications. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 24V control board designed for sliding gates Brushless technology for enhanced efficiency Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various applications Product Description The Roger Technology Brushless B70/1DC Control Board is engineered to deliver superior performance for sliding gates. This 24V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use. Specifications Control Board Type Brushless Voltage 24V Application Sliding Gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DC Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DC Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.
Roger Technology Brushless B70/1DCHP Control Board | 36V Heavy-Duty, High-Speed
Product Overview The Roger Technology Brushless B70/1DCHP Control Board is a high-performance 36V control board specifically designed for heavy-duty and high-speed sliding gate applications. Featuring a digital encoder, this control board ensures precise and reliable operation, making it ideal for demanding residential and commercial environments. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 36V control board designed for heavy-duty and high-speed sliding gates Brushless technology for enhanced efficiency and durability Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various high-demand applications Product Description The Roger Technology Brushless B70/1DCHP Control Board is engineered to deliver superior performance for heavy-duty and high-speed sliding gates. This 36V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement, even in demanding conditions. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use in high-demand settings. Specifications Control Board Type Brushless Voltage 36V Application Heavy-duty and high-speed sliding gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DCHP Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling heavy-duty and high-speed sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DCHP Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.
Rubber Impact Protection Strip XBA13
Rubber impact protection strip - - Accessory for M3BAR, M5BAR, M7BAR.
Lever Release System for S700 and S800
CAME H3000 Safety Release Mechanism. What comes in the box QuantityItem 1 CAME H3000 Safety Release Mechanism
SD502 - Junction box This product is to be used with LIVI 502.
SEH | Electric Strike for Insert Locks | 500kg Pulling Force
Product Overview The SEH Electric Strike is designed for use with H-Metal and H-Wood insert locks, providing a robust and reliable solution for access control. Equipped with a blocking system that withstands a pulling force of up to 500 kg, this electric strike ensures maximum security. The SEH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it versatile for various security needs. Its water-resistant and weatherproof design guarantees durability in different environmental conditions. Key Features Available in two versions: Emissa (Fail Close) and Ruptura (Fail Open) Easy left or right changing Suitable for post profiles of 50 mm and more Voltage: 12V AC/DC Current for Emissa: 1A Current for Ruptura: 1.5A Water-resistant and weatherproof Pressure resistance on self-latching bolt: 500 kg Product Description The SEH Electric Strike is a highly durable and secure solution for access control in various settings. Its ability to withstand a pulling force of 500 kg makes it exceptionally strong and reliable. Available in both Fail Close and Fail Open versions, the SEH electric strike can be tailored to meet specific security requirements. The easy left or right changing feature enhances its versatility, while its compatibility with post profiles of 50 mm and more ensures broad applicability. Installation and Usage Installing the SEH electric strike is straightforward, thanks to its design for easy left or right changing. The strike is compatible with H-Metal and H-Wood insert locks, making it suitable for a variety of applications. It operates on 12V AC/DC, with the Emissa version requiring 1A and the Ruptura version requiring 1.5A. The water-resistant and weatherproof construction ensures reliable performance in various environmental conditions, making it ideal for both indoor and outdoor use. Durability and Protection The SEH electric strike is built to withstand harsh conditions, with a water-resistant and weatherproof design that ensures long-term durability. Its anodized aluminium housing protects against vandalism and environmental damage, while the stainless steel push buttons are designed to endure frequent use. The strike's ability to withstand a 500 kg pulling force provides robust security, making it an excellent choice for high-security applications.
SEL Digital Surface Mounted Keypad including Control Card
SEL Digital Surface Mounted Keypad including Control Card
SFR-B Standard Stroke Post Bracket
SFR-B STANDARD STROKE POST BRACKET Adjustable non-weld bracket for standard stroke motors
Single 1/2" chain (per metre)
CAME CCT 1/2 Inch Chain. Minimum 5m Order. What comes in the box QuantityItem 1 CAME CCT 1/2 Inch Chain
Single 180 degree conversion kit for DU.IT
2 Year guarantee
Single 180 degree conversion kit SB.180K for DU.350 motor (Key type)
2 Year guarantee
Single 180 degree conversion kit SB.180L for DU.350 motor (Hex key)
2 Year guarantee
Single 180 degree conversion kit SB.DU.180K for DU.IT motor (Key type)
2 Year guarantee
Single mounting plate B.P for BOB50 operator
2 Year guarantee
Single steel crank arm DU.E2 for PREMIER
2 Year guarantee
Single stem cover BILL50.CO for BILL50M operator
2 Year guarantee
Single-Channel Metal Mass Detector LP21 | 24V Power Supply
Product Overview The LP21 is a single-channel metal mass detector designed for detecting metal objects. Powered by a 24V power supply, this detector features a magnetic sensor for reliable detection. It is equipped with an LCD display for easy operation, control, and programming of parameters. Key Features Single-channel metal mass detector Operates on a 24V power supply Magnetic sensor for detecting metal objects Simple and safe operation with LCD display Quick and versatile with unlimited functions Intuitive programming Automatic indication of loop inductance Product Description Single-Channel Metal Mass Detector LP21 - 24V Power Supply The LP21 metal mass detector is a highly efficient and reliable device designed for detecting metal objects. It operates on a 24V power supply and uses a magnetic sensor for accurate detection. The device features a user-friendly LCD display that allows for easy control, monitoring, and programming of its parameters. Simple and Safe Operation The LP21 detector ensures simple and safe operation, with all functions and parameters easily controllable via the integrated LCD display. This makes it easy to check and program the device as needed, ensuring optimal performance. Quick and Versatile With its unlimited functions and intuitive programming, the LP21 metal mass detector is both quick and versatile. It is designed to meet a wide range of detection needs, making it a valuable addition to any metal detection setup. Integrated Measurement System The LP21 features an integrated measurement system that automatically indicates the loop inductance. This feature enhances the device's accuracy and reliability, ensuring consistent performance in various applications.
Solemyo Photovoltaic Panel SYP for 24V Supply - Max Power 15W
Photovoltaic Panel for 24 V Supply with Maximum Power 15W.
Solemyo SYKCE | Solar Power Kit with SYP Photovoltaic Panel and PSY24 Battery
Product Overview The Solemyo SYKCE Solar Power Kit is a comprehensive solution designed to automate gates, garage doors, and road barriers using solar power. This kit includes the SYP photovoltaic panel and the PSY24 battery box with a charging control circuit, providing a reliable and eco-friendly power source for your automation systems. Key Features Complete solar power kit for automation systems Includes SYP photovoltaic panel for 24V supply PSY24 battery box with control circuit and carry handles Contains all necessary cables and connectors Ideal for gates, garage doors, and road barriers Eco-friendly and sustainable power solution Product Description Solemyo SYKCE Solar Power Kit - SYP Photovoltaic Panel and PSY24 Battery The Solemyo SYKCE Solar Power Kit offers a sustainable and efficient way to automate gates, garage doors, and road barriers. This kit includes the SYP photovoltaic panel, which provides a 24V power supply, and the PSY24 battery box equipped with a charging control circuit. Together, they create a reliable solar power system for your automation needs. Components Included SYP Photovoltaic Panel: A high-efficiency panel that generates a 24V power supply, harnessing solar energy to power your automation systems. PSY24 Battery Box: A 24V battery box with an integrated control circuit and convenient carry handles, ensuring easy transport and installation. The control circuit manages the charging process, optimizing the battery life and performance. Cables and Connectors: The kit includes all necessary cables and connectors to ensure a seamless connection between the photovoltaic panel and the battery box, as well as to the automation systems. Eco-Friendly Automation The Solemyo SYKCE Solar Power Kit provides an eco-friendly alternative to traditional power sources. By utilizing solar energy, this kit helps reduce carbon emissions and energy costs, promoting a sustainable approach to automation. Applications Ideal for a variety of applications, the SYKCE kit is perfect for automating gates, garage doors, and road barriers. It ensures that your automation systems operate smoothly and efficiently, even in locations without access to conventional power sources.
Solemyo SYP30 Photovoltaic Panel for 24 V Supply - Max Power 30W
Photovoltaic Panel for 24 V Supply with Maximum Power 30W.
Steel rack galvanised C/W screw / spacers 22 x 22 x 1000mm x 2
Steel rack galvanised C/W screws / spacers 22 x 22 x 1000
Steel rack galvanised C/W Screws / Spacers 30 x 12 x 1000mm x 2
Steel rack galvanised C/W screw / spacers 30 x 12 x 1000mm
Steel support for pillar surface mounting DOC-R
CAME DOC-R Cameo Photo Cell Bracket. What comes in the box QuantityItem 1 CAME DOC-R Bracket
Stone Table Shockproof Holder WEO - Orange
Niceway Stone table shockproof holder in orange.
Stone Table Shockproof Holder WEW - White
Niceway Stone - Table shockproof holder in White.
Straight Extension NSEL for Measurements from 30 to 50cm - Impact Force Measurement
Straight extension for measurements from 30 to 50cm - Applicable on NSFB and NSFS.
Straight telescopic transmission arm Ferni Telescopic Arm
BPT CAME-F1001 | The telescopic arm for use with FERNI gearmotors is designed for to meet all application requirements forhinged doors and gates, and is especially suitable for overhead installation. The arm may be fitted to doors/gatesup to 2 m. in width.
Straight transmission arm and slide guide STYLO-BD
3 Year guarantee
Surface mounted key switch SET-J
Came SET-J surface-mounted key switch with aluminium alloy casing, lock protecting flap-door and cylinder.
Surface-mounted key switch SET-E
3 Year guarantee
Synchronisation module DA.2S for 2x sliding gate motors
2 Year guarantee
Tag System TTX4 Recessed Transmitter with Mains Power
Recessed transmitter, 4 channels, with mains power. Ideal for the control of automations not directly accessible from cable controls.
Telescopic Reinforced Straight Arm to be Screwed
telescopic reinforced straight arm to be screwed - Right and left.
Telescopic straight arm to be screwed, right and left.
Came A4472 Transmission lever with adjustable gate-leaf opening stop. for use with the FROG underground automation system
Transmission lever for up to 140 degrees A4370
CAME A4370 140-degree conversion kit for FROG A motors. What comes in the box QuantityItem 1 CAME A4370 Conversion Kit
Transponder Card MOCARD - For ERA Proximity Reader
Transponder card for proximity reader, programmable via OBOX. Pack of 10
CAME A4365 Release for FROG A motors with triangular key. What comes in the box QuantityItem 1 CAME A4365 Triangular Release Key
TT2D Mindy Control Unit | Management of 230 Vac Lighting Systems
Product Overview The TT2D Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and switching module, making it a versatile solution for efficiently controlling your lighting systems. This unit is compatible with a wide range of Nice transmitters, ensuring seamless integration and reliable performance. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver and switching module Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2D Mindy Control Unit for 230 Vac Lighting Systems The TT2D Mindy Control Unit is an advanced solution for managing 230 Vac lighting systems. This miniaturised unit includes a built-in radio receiver and switching module, providing comprehensive control over your lighting setup. Its compatibility with various Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo, ensures that you can easily integrate it into your existing system. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, offering ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2D Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2D Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.
TT2L Mindy Control Unit | Management of 230 Vac Lighting Systems
Product Overview The TT2L Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and is compatible with a variety of Nice transmitters, making it a versatile solution for controlling your lighting systems efficiently and reliably. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2L Mindy Control Unit for 230 Vac Lighting Systems The TT2L Mindy Control Unit is an advanced, miniaturised solution for managing 230 Vac lighting systems. It comes with a built-in radio receiver, allowing it to communicate seamlessly with a wide range of Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo. This compatibility ensures that you can integrate the TT2L control unit into your existing system with ease. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, providing ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2L Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2L Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.
Two-Channel Metal Mass Detector LP22 | 24V Power Supply
Product Overview The LP22 is a two-channel metal mass detector designed for detecting metal objects. Powered by a 24V power supply, this detector features a magnetic sensor for reliable detection. It is equipped with an LCD display for easy operation, control, and programming of parameters. Key Features Two-channel metal mass detector Operates on a 24V power supply Magnetic sensor for detecting metal objects Simple and safe operation with LCD display Quick and versatile with unlimited functions Intuitive programming Automatic indication of loop inductance Product Description Two-Channel Metal Mass Detector LP22 - 24V Power Supply The LP22 metal mass detector is a highly efficient and reliable device designed for detecting metal objects. It operates on a 24V power supply and uses a magnetic sensor for accurate detection. The device features a user-friendly LCD display that allows for easy control, monitoring, and programming of its parameters. Simple and Safe Operation The LP22 detector ensures simple and safe operation, with all functions and parameters easily controllable via the integrated LCD display. This makes it easy to check and program the device as needed, ensuring optimal performance. Quick and Versatile With its unlimited functions and intuitive programming, the LP22 metal mass detector is both quick and versatile. It is designed to meet a wide range of detection needs, making it a valuable addition to any metal detection setup. Integrated Measurement System The LP22 features an integrated measurement system that automatically indicates the loop inductance. This feature enhances the device's accuracy and reliability, ensuring consistent performance in various applications.
Universal Radio Transmitter OPR-KIT and NANO Receiver
Product Overview The Universal Radio Transmitter OPR-KIT and NANO Receiver is designed to convert any device operating a switch into a wireless control system. This kit is particularly useful in situations where it is difficult to install cables, such as remotely sited disabled buttons or other remote switches. The receiver can memorize up to 85 CDVI radio transmitters, offering enhanced flexibility and control for a wide range of applications. Key Features Creates wireless devices from any switch-operated device Ideal for difficult cable installations Receiver can memorize up to 85 CDVI radio transmitters Rolling Code Keeloq® technology 433.92MHz frequency ASK modulation Compact and easy to install Product Description The OPR-KIT allows you to create your own wireless device, making it an ideal solution for converting any switch-operated device into a radio control system. This kit is particularly useful in areas where installing cables is challenging, such as for remotely sited disabled buttons. The NANO receiver enhances the flexibility of the kit, capable of memorizing up to 85 CDVI radio transmitters. Using Rolling Code Keeloq® technology, the OPR-KIT ensures secure and reliable communication between the transmitter and receiver. Operating at a frequency of 433.92MHz with ASK modulation, the kit provides a robust and efficient wireless control solution. Technical Specifications SpecificationDetails Frequency 433.92MHz Modulation ASK Coding Rolling Code Keeloq® Receiver Memory 85 transmitters Transmitter Voltage 9Vdc battery Receiver Voltage 12V to 24Vac/dc Transmitter Dimensions 54 x 29 x 6mm Receiver Dimensions 50 x 32 x 20mm Additional Information The Universal Radio Transmitter OPR-KIT and NANO Receiver provide a flexible and efficient solution for wireless control applications. Whether you need to convert a switch-operated device into a wireless system or require a solution for difficult cable installations, this kit offers the reliability and functionality you need. Included in the Box 1 x Universal Radio Transmitter OPR-KIT 1 x NANO Receiver 9Vdc battery for transmitter Installation manual
Universal Receivers SMX2R with 256-Codes Memory
Universal receivers, 2 channels with 256-codes memory, pre-wired.
Videx 701T/12 BST/GMT Digital Time Clock 12V AC or DC
Product Overview The Videx 701T/12 BST/GMT Digital Time Clock is a versatile and reliable solution for managing time-based operations. This digital time clock offers automatic BST/GMT correction, six fully programmable on/off times, a trade button input, and a 3A relay output. It operates from either 12V AC or DC, making it suitable for a wide range of applications. The unit is housed in a durable white ABS plastic box. Product Description The Videx 701T/12 Digital Time Clock is designed to provide accurate and reliable time control for various systems. It features automatic British Summer Time correction, ensuring the clock adjusts itself for BST/GMT changes. With six fully programmable on/off times, you can customize the operation to fit your specific needs. The trade button input allows for quick activation, and the 3A relay output ensures robust performance. The clock is enclosed in a compact and durable ABS plastic box, making it easy to install and use. Key Features 12V AC or DC operation Dry contact 3A rated relay output (CO, NO & NC) Six fully programmable on/off times Automatic British Summer Time correction (BST/GMT) Trade button input with adjustable activation time (1 to 99 seconds) Easy-to-read 2 lines 16 characters backlit LCD display Three-month rechargeable onboard battery backup Compact white ABS plastic box (110 x 70 x 30 mm) What's in the Box Videx 701T/12 BST/GMT Digital Time Clock Installation manual Mounting hardware Specifications Power Supply: 12V AC or DC Relay Output: Dry Contact, 3A rated (CO, NO & NC) Programmable Times: Six on/off times Battery Backup: Three-month rechargeable onboard battery Dimensions: 110 x 70 x 30 mm Display: 2 lines 16 characters backlit LCD Material: White ABS plastic
WES EASY - For use with easy controllers Optional card for radio control of safety devices using WES sensors
Wired receiver 230v loads, 1000W
Wired receiver 230v loads, 1000W
wired receiver external
Wireless LLW - Flashing Light with Built - In Photovoltaic Panel
Wireless flashing light with the built-in photovoltaic panel.
Joint for bars XBA15 - From 1950mm to 2400mm.
ZZSUB59 Black plastic release cone for the new style FCS box
ZZSUB59 Black plastic release cone for the new style FCS box