FAAC Electro mechanical Twin kit with articulated arm for swing gates 390 24v KIT

Code: 390 24v KIT
  • £1,455.60 Inc Vat
Item in Stock | Usually dispatched within 24 hours
Loading...

FAAC 390 24V KIT

Complete kit for a pair of residential swing gates up to a maximum of 3m each leaf.

Battery Backup Available

Battery backup is available for this motor in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.

Integrated Open & Close Limits

This equipment features adjustable open and close limits. This allows you to set the limits of the gate of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width it is advisable to talk to us before ordering if this feature is critical to your installation.

Designed for large pillars

Specially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the pillar of the gate without the need to modify any of the bracketry that is normally supplied with other equipment.

Built-in obstacle detection

This equipment features built-in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in contact with the gate. Further safety can be added with the addition of safety edges.

Quick & Easy Installation

Equipment designed for the quick & easy installation of existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors

Bus Connection for Peripherals

Control Panel has Bus terminals for the connection of photocells and accessories with an easy 2-wire Non-polarised wiring system. Speeds up the installation by preventing errors during installation. Can be connected as desired. Serial/Parallel etc.

Manual Release from outside

Manual release from outside the property in the event of a power failure or fault. Particularly useful when the gate is the only means of access to the property.

What comes in the box
QuantityItem
2FAAC 390 24v Motor's
2FAAC Articulated Arm's
1FAAC E124 Control Board
1FAAC XF868 SLH Receiver
2FAAC 868 SLH 2 Channel Transmitters'
1FAAC XP 20BD Pair of Photocells

390 24v electro mechanical kit with articulated arm for swing gates up to 3m,

kit includes,

  • 2x 390 24v operator with articulated arm
  • 1x E024S control board
  • 1x XF868 receiver
  • 2x two button transmitter
  • 1x pair of photocells

If you are not satisfied with your purchase, please contact us by phone. Personalized or other customized products cannot be returned for refund or exchange under any circumstances, unless stated otherwise at time of purchase.

 If you need to return an item for any reason, the purchaser is responsible for the cost of the return carriage in any circumstances

We are open Monday - Friday, excluding bank holidays.

 

For orders received before 2pm we aim to deliver on a next day service

 

(This does not include any fabricated items)

 

*Please note there is a 15% restocking charge for returns*

All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.

 

Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.

Be the first to review FAAC Electro mechanical Twin kit with articulated arm for swing gates 390 24v KIT. Write a review ›
Top