CAME FTL-P Artic Arm Kit 24V for a Pair of Gates up to 2m

Twin gate kit. 24v. Max 2000mm. 200kg. Per gate. EN Tested.
Code: FTL-P
  • £627.84 Inc Vat
Item in Stock   |   Usually dispatched within 24 hours
Fast Next Day Delivery When Ordered Before 2 PM On Weekdays
OVER 25 YEARS Of Industry Experience
Guaranteed Safe Card Payments & Easy Returns
Loading...

CAME FTL-P KIT

Complete kit for a pair of residential or condominium applications on small and medium-sized pillars for swing gates up to a maximum of 2m in width or 200kg in weight each leaf

Battery Backup Available

Battery backup is available for this motor for in the event of a mains power failure. Electric gates make it particularly difficult to gain access to a property if the mains power fails.

Slow Down on Open and Close

With this equipment you can adjust the speed of your gate as it approaches the open and closed positions. Further improving on the overall installation and provides a personallised and refined touch to each application.

Designed for large pillars

Especially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the gates pillar without the need to modify any of the bracketry that is normally supplied with other equipment.

Intensive Use

The motor is specifically designed for intensive use. Enjoy the comfort of an electric gate that can open and close for numerous visitors throughout the day. Particularly useful for shared entrance gates to a large number of residences.

Built in obstacle detection

This equipment features built in obstacle detection. Implemented correctly this can stop and reverse upon detection of an obstacle. Obstacles are detected when the gate experiences an increase in resistance that can be caused by a person a vehicle an object or even wind obstructing the path of the gate. Although this safety feature can be very effective. It is strongly advised that all installations undergo an impact force test to ensure the safety of anyone who may come in to contact with the gate. Further safety can be added with the addition of safety edges.

Quick & Easy Installation

Equipment designed for the quick & easy installation to existing hinged swing gates. Can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board & low voltage cabling to the motors

Solar Ready

This equipment can be solar powered. Whether you are looking for a low cost eco-friendly installation. Want to cut down the cost of installation by removing the need to excavate for mains power or you simply cant get mains power to the gate for whatever reason. This equipment is the ideal choice.

Kit includes
QuantityItem
1CAME FTL20DGC 24v Motor with Control Panel - 801MB-0080
1CAME FTL20DGS 24v Motor - 801MB-0050
1CAME AF43S Frequency Card 433MHz
1CAME DIR-10 Pair of safety photocells
2CAME TOPD4FKS Four Channel Black Radio Remote's - 806TS-0102
1CAME TOP-A433N Antenna

Gate Type Swing Gate

Single Or Twin Kit Twin Gate Kit

Max Weight Per Gate 200kg

Max Length Per Gate 2000mm

Above Or Underground Above Ground

Max Opening Angle 110 Degrees

Motor Electromechanical

Locking Method Mechanically Locking Motor

Power Supply Voltage 230v

Motor Voltage 24v

Gate Speed Adjustable

Duty Cycle Intensive

Obstacle Detection Built-In Obstacle Detection

Protection Rating IP 44

Category Swing Gate Kit

 

If you are not satisfied with your purchase, please contact us by phone within 14 days of receipt of goods. Personalized or other customized products cannot be returned for refund or exchange under any circumstances unless stated otherwise at the time of purchase.

 If you need to return an item for any reason, the purchaser is responsible for the cost of the return carriage in any circumstances

We are open Monday - Friday, excluding bank holidays.

For orders received before 2 pm, we aim to deliver on a next day service

(This does not include any fabricated items)

*Please note there is a 15% restocking charge for all returns*

All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.

 

Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.

Top