BFT Stoppy B 700 x 200 Electromechanical Automatic Bollard c/w LED Light Crown

Code: STOPPYB700x200LED
  • Now £1,871.22 Inc Vat
Item in Stock | Usually dispatched within 24 hours
Loading...

Stoppy B 700 x 200 Electromechanical Automatic Bollard c/w LED Light Crown

The Stoppy B 200/700 bollard is the perfect solution for traffic management and security across a wide range of environments. The discretely concealed bollards provide non-intrusive yet extensive protection.

Available in both 115/500mm (55kg) or 200/700mm (105kg) height sizes, the BFT Stoppy B Bollards come with rear reflective strips for increased visibility during darkness. Bollard control can be aggregated through the use of the PERSEO CBD or PERSEO CBE dedicated control panel which are both capable of controlling up to four security bollards at a time.

 

Other features include:

  • Internal heater
  • Reed switch
  • Working environment of -20 to 60 degrees C
  • Raising time of 7/9 seconds for either 115/500mm or 200/700mm versions
  • 6000 J breaking resistance
  • Cost-effective installation security measure
  • Dust and deep water-resistant (IP67)

Tech Spec:

 Shaft diameter200 mm
 Shaft height700 mm
 Raising time9 sec
 Control unitPERSEO CBD
 Breaking resistance6000 J
 Type of limit switchreed magnetic sensor
 Slowdownyes
 Lockelectric brake
 Manual operationreversible with no power
 Frequency of usesemi-intensive
 Ambient conditions-20°C +60°C

 

If you are not satisfied with your purchase, please contact us by phone. Personalized or other customized products cannot be returned for refund or exchange under any circumstances, unless stated otherwise at time of purchase.

 

We are open Monday - Friday, excluding bank holidays.

 

For orders received before 2pm we aim to deliver on a next day service

 

(This does not include any fabricated items)

 

*Please note there is a 15% restocking charge for returns*

All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.

 

Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.

Be the first to review BFT Stoppy B 700 x 200 Electromechanical Automatic Bollard c/w LED Light Crown. Write a review ›
Top