PERIMETER SECURITY
Intended for traffic control and protection of those sensitive areas (military stations, police headquarters, airports, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 48 km/h.
OIL-HYDRAULIC
Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered.
STRONG
Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 750.000 J. Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights.
VERSATILE
A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °C where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.
DIMENSIONS (mm)
ADDITIONAL INFORMATION
Item includes an automatic bollard complete with pit, moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with head and rubber edge and No. 12 amber-colour integrated LED lights, approved retro-reflecting high intensity micro-prismatic adhesive film, electrolytic galvanized steel housing assembly with an oilhydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), burglar-proof cover plate and release spanner with triangular socket. The power supply cable is not included, it is though available in the section of the catalogue dedicated to the bollard accessories.
SPECIFICATION
| TALOS BOLLARD TYPE | TALOS C730 series |
| Cylinder diameter (mm) | 275 |
| Cylinder thickness (mm) | 12 |
| Cylinder height from ground (mm) | 1.000 |
| Cylinder material | S355J2H steel |
| Cylinder treatment and finishing | cataphoresis and polyester powder coating RAL 7016 / AISI 304 brushed SS steel sleeve |
| Pit | hot dip galvanization |
| Rising time (s) [cm/s] | ~5,00 [20] |
| Lowering time (s) [cm/s] | ~4.20 [23] |
| Working temperature (°C) | -20 ÷ +80 (-40 with heater) |
| Oil type | 708L |
| Power supply (Vac – Hz) | 230 - 50 |
| Absorbed power (W) | 1.850 |
| Absorbed current (A) | 5 |
| Grade of protection IP/motor-pump | 67 |
| Frequency of use (cycles/day) | heavy duty / 2.000 |
| Impact resistance (J) | 250.000 |
| Breakout resistance (J) | 750.000 |
| Maximum static load (kg) | 20.000 |
If you are not satisfied with your purchase, please contact us by phone within 14 days of receipt of goods. Personalized or other customized products cannot be returned for refund or exchange under any circumstances unless stated otherwise at the time of purchase.
If you need to return an item for any reason, the purchaser is responsible for the cost of the return carriage in any circumstances
We are open Monday - Friday, excluding bank holidays.
For orders received before 2 pm, we aim to deliver on a next day service
(This does not include any fabricated items)
*Please note there is a 15% restocking charge for all returns*
All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information. |
Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so. |
