DESIGN AND MANUFACTURING
Recommended to control access to residential areas and also for commercial and industrial applications.
Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Solenoid valve (as an option) for automatic lowering in case of power failure. Tested for heavy duty service even in low and high temperature conditions.
EASY ACCESS TO THE OIL-HYDRAULIC COMPONENTS
The handy housing position of the motor pump and oil-hydraulic actuator inside the bollard allows for easy maintenance and reduces service and installation times. In this way the components are also more protected, rust and other factors of deterioration are prevented.
SIMPLE AND QUICK TO INSTALL
Reduced weight of the pit so that no particular excavation or brick works are needed. Cataphoresis treated and polyester powder coated scratch-proof steel cylinder, head with rubber edge. Hall effect limit switch sensors, LED lights (optional).
A vast range of command and safety accessories allow for reliable and precise control of the installations. The electronic control unit can be set so that it can manage several bollards at a time.
Fully retractable, heavy duty, automatic bollard consisting of an oil-hydraulic motorpump unit incorporated inside the main structure and an oil-hydraulic actuator inside the moving cylinder. Suitable to meet residential, commercial and industrial requirements and urban applications. IP 67. Height from ground level can be 500, 600 or 800 mm. Scratch-proof S235JRH steel moving cylinder, thickness 5 mm and ø 100 mm, cataphoresis treated and polyester powder coated. Cylinder head made of aluminium with rubber edge, cataphoresis treated aluminium cover plate. Head and cover plate are slip-proof and tread resistant. Moving cylinder fitted with an approved, retro-reflecting, high intensity, micro-prismatic, high intensity adhesive film (h 80 mm), available with No. 4 amber-colour signalling LED lights flashing and radially fitted, 10 m electric cable. Hot-dip galvanized steel pit. Cover plate allowing access to the hydraulic release device for the manual lowering of the bollard by a special spanner in an emergency. Impact resistance 30.000 J, breakout resistance 150.000 J, static load max 1.600 kg (bollard in raised position), max 20.000 kg (in lowered position). Working temperature -40 ÷ +80 °C. Supply voltage 230 Vac ± 10%, 50 Hz. Absorbed power 330 W. Rising time ~ 4,7 s [h 500 mm from ground level], ~ 5,6 s [h 600 mm from ground level] ~ 7,5 s [h 800 mm from ground level]. Intensive use, 2.000 cycles/a day.
|Cylinder diameter (mm)||100|
|Cylinder thickness (mm)||5|
|Cylinder height from ground (mm)||500/600/800|
|Cylinder material||S235JRH steel|
|Cylinder treatment and finishing||cataphoresis and polyester powder coating RAL 7016|
|Pit||hot dip galvanization|
|Working temperature (°C)||- 20 (°C) / + 80 (°C)|
|Power supply (Vac – Hz)||230 - 50|
|Absorbed power (W)||330|
|Absorbed current (A)||1,8|
|Grade of protection IP/motor-pump||67|
|Frequency of use (cycles/day)||heavy duty / 2.000|
|Impact resistance (J)||30.000|
|Breakout resistance (J)||150.000|
|Maximum static load (kg)||20.000|
|CODE (click to open)||HEIGHT (mm)||LED LIGHTS||SOLENOID VALVE||WEIGHT (kg)||RISING TIME (s)||RISING SPEED (cm/s)||LOWERING TIME (s)||LOWERING SPEED (cm/s)|
Each item includes an automatic bollard complete with pit, cover plate, moving cylinder made of cataphoresis treated steel and polyester powder coated in RAL 7016 anthracite grey, complete ith head and rubber edge, approved retro-reflecting micro-prismatic high intensity adhesive film, electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and motor-pump drive unit, two limit switch sensors (bollard in standing and lowered positions), release spanner, 10 m electric cable to power supply the hydraulic motor-pump drive unit and the limit switches. LED lights and 24 Vdc solenoid valve, with 10 m electric cable, only for the items as indicated in the table.
If you are not satisfied with your purchase, please contact us by phone within 14 days of receipt of goods. Personalized or other customized products cannot be returned for refund or exchange under any circumstances unless stated otherwise at the time of purchase.
If you need to return an item for any reason, the purchaser is responsible for the cost of the return carriage in any circumstances
We are open Monday - Friday, excluding bank holidays.
For orders received before 2 pm, we aim to deliver on a next day service
(This does not include any fabricated items)
*Please note there is a 15% restocking charge for all returns*
All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.
Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.