FAAC E124 control board

2 Year guarante
Code: E124
  • £266.24 Inc Vat
Item in Stock | Usually dispatched within 24 hours
Loading...

KEY FEATURES

  • Swing gate control board for 24V operators
  • Additional programming features accessible via a device with a USB port
Product details

The E124 control board is considered to be one of the highest performance electronic control units for swing gates currently available on the market.

Compatible with all FAAC 24V swing gate systems; the E124 will also control other brands. It’s a highly flexible control board with a huge range of variable parameters for swing gate installations.

It has high levels of programmability, it offers:

  • 10 standard logics which can be further customized to give almost unlimited programming.
  • 50 different power levels and 10 different speeds can be varied independently allowing maximum performance whilst monitoring anti-crush safety.
  • Powerful motor outputs allow up to 36Vdc to be supplied to the FAAC motors, which enables higher speeds compared to other 24V boards.
  • Management of limit switches and encoders for safety and compliance to standards.

Other features:

  • The control board has an ultra sense function for obstacle detection with hydraulic operators.
  • Hold closed function to pulse leaves closed every 1 to 48 hours.
  • A cycle counter allows consistent and regular servicing by showing the total number of cycles or alternatively, the counter can be set to request assistance after a set number of cycles.
  • The 32-bit processor platform has sufficient capacity for today and the future. Software developments can be uploaded to the board as and when they become available. via a USB connector.
  • It can be programmed via push buttons and advanced programming can be undertaken via PC. (Software is available free of charge).


PC programming allows access to all the installation parameters, easily adjustable at the touch of a button and there is a password protection option. A simple plug-in USB cable connects the PC to the control board. The connection of the PC allows the operation of the system to be monitored in real time, providing invaluable data for the fine-tuning of the system. Existing control board programming can be uploaded to a connected PC for analysis or modification.

PRODUCT INFORMATION:

  • The board has a switchable anti-wind feature to best manage the operation in windy conditions.
  • Adjustable deceleration times and speed allow the board to be programmed to specific site requirements.
  • There is a battery back up option - UK-BATTERY
  • The pedestrian command can be programmed for any percentage opening required and different pause times. The programming also includes a dead man feature for testing motor direction and function.
  • The board possesses 2 connectors for radio control reception, allowing 2 different radio frequencies to be managed simultaneously for different functions. One for XF receivers and the other for RP, decoder, and minidisc receivers. 2nd channel of the XF receiver can be programmed to activate an output on the board.
  • Built-in 6 events, 7-day timer with summertime adjustment, can be wired to hold the gates open or isolate inputs.
  • Once the time and date are set on the board, it automatically logs the last 128 events, the event log can be retrieved with a PC.
  • X-com technology is available, allowing the PC to communicate with the control board via radio for ease of programming accessibility.
  • The board has programmable inputs, which is a unique feature, and programmable outputs.
  • New BUS (2easy) accessories can be used alongside other conventional safety devices on the same system.
  • Unlike any other control board, force and speed can be varied independently which adds to the flexibility of the system, which is a great added feature that has never been available before.
  • The board allows for maximum thrust at opening or on closing. These both allow for the safer running of the system, as excess power isn’t required continuously throughout the cycle.

If you are not satisfied with your purchase, please contact us by phone. Personalized or other customized products cannot be returned for refund or exchange under any circumstances, unless stated otherwise at time of purchase.

 If you need to return an item for any reason, the purchaser is responsible for the cost of the return carriage in any circumstances

We are open Monday - Friday, excluding bank holidays.

 

For orders received before 2pm we aim to deliver on a next day service

 

(This does not include any fabricated items)

 

*Please note there is a 15% restocking charge for returns*

All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.

 

Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.

Be the first to review FAAC E124 control board. Write a review ›
Top